Ask HDSW0024M1 User manual

User Manual
3 Port HDR HDMI Switcher
Model:HDSW0024M1

INTRODUCITON
Picture 1.0 front panel showing Picture 1.1 rear panel showing
Picture 1.2 IR panel showing
* Please take out the film at the rear of the remote before you use. Please insert the film to
remote rear if you do not use the remote for long time.

Connection and operation:
1. To use HDMI cable to connect the HD source with the HDMI input port of device.
2. To use HDMI cable to connect the HDMI output port of device with the display.
3．To use the USB 2.0 TO DC 5.5MM power cable to connect the DC5V Port of the device
with USB Power source like TV or USB Power Docking.
4. Then press again the “Switch” button at device or press the button at remote to
operate the device.
5. To press the "A" button at remote or press the "Select" button for lasting five seconds, it c
an turn on or turn off the auto switch function.When the input channel led light flash for one
time, the auto switch is turned on; when the input channel led light flash for three times, the
auto switch function is closed.

Spec:
Mode No
HDSW0024M1
Mode name
3 Port HDR HDMI switcher
Input channel
3 port
Output channel
1 port
Video format
480P/720P/1080P/2160P
Deep color
8/10/12Bit@480P/720P/1080P 8Bit@2160P
Audio format
Dolby HD/DTS HD/Dolby Atoms/Dolby AC3/DTS/LPCM......
Transmission bandwidth
25~600MHz
Transmission rate
0.75~18Gbps
Auto switch
Support
IR distance
≥4m
Timing
Support
Input cable length
2160P/AWG 26 ≤5m
1080P/AWG 26 ≤10m
Output cable length
2160P/AWG 26 ≤5m
1080P/AWG 26 ≤10m
DC input specification
DC 5V/1A
Max working current
220mA
Working temperature range
0 ~ +40℃
Working humidity range
5 to 85%RH（No Condensation）
Storage temperature
-15 to 55℃
Storage humidity
5 ~95%RH(No Condensation)
Size
82x58.5x18.4(mm)
Weight
48g
Accessories
Manual, Remote, USB Cable