Askey AP5660W User manual

Page: 1
AP5660W
User Manual

Page: 2
Table of Content
1. Getting to know your AP5660W .....................................................3
2. Installation......................................................................................4
2.1. Login web page..............................................................................4
2.2. Change your WiFi Setting and Setup with Mesh ........................5
[CAP] refers to your AP5660W(CAP mode). ................................................6
[RE] refers to the extender. ..........................................................................6
[STA] refers to the Desktop/Laptop/Mobile connected to your device or
extender through SSID and Password. ........................................................6
3. Web GUI ........................................................................................7
3.1. Dashboard .....................................................................................7
3.2. Network........................................................................................10
3.3. System Settings ...........................................................................11

Page: 3
1. Getting to know your AP5660W
①LED Indicator
②WPS Button
③Reset Button
④LAN Port
⑤Power Plug
Front Panel LED State of Router
Off Power off
Red Solid ->
Green Blinking until System is
available
Booting up
Red Solid Boot-up fail
Green Solid Connectivity issues
(no internet connection, or can’t get address
from internet or DHCP server)
Blue Blinking Connecting to Internet
Blue Solid Connected to Internet and WiFi (MESH)
Ready to serve
Green and Blue alternate blinking Pairing with WPS button

Page: 4
2. Installation
2.1. Login web page
1. Plug in adapter power
2. Connect the PC Ethernet cable to LAN port.
3. Launch your web browser and enter the AP5660W’s default address:
192.168.1.1
4. Enter the default username(admin) and password(admin) to log in to
your device’s management page.
5. On the management page, you can see “Dashboard, Network, System
Settings” And the Dashboard items are followed by the tab you selected.

Page: 5
2.2. Change your WiFi Setting and Setup with Mesh
1. Login the AP5660W Web GUI, then select “Mesh” on Network list.
2. On “BASIC” tab, you can see AP Mode default is “RE”, change Mode to
“CAP”, and enter your “WiFi Network Name”, “WiFi Password”, “Security
Setting”. Or remain default. Then click “Save”.

Page: 6
3. Connect AP5660W to Router LAN port by Ethernet. And wait LED from
“Blue blinking” to “Blue solid”.
4. Power on other AP5660W(default is RE) and wait LED to “Green solid”.
5. Press AP5660W(CAP) WPS button.(Green and Blue LED alternate
blinking).
6. Press AP5660W(RE) WPS button.(Green and Blue LED alternate
blinking).
7. When AP5660W(RE) LED is Blue solid, AP5660W(RE) is registered and all
is well.
8. On the AP5660W(CAP) Web GUI, you can see the devices connected to
your Mesh Network.
[CAP] refers to your AP5660W(CAP mode).
[RE] refers to the extender.
[STA] refers to the Desktop/Laptop/Mobile connected to your device or extender through
SSID and Password.

Page: 7
3. Web GUI
3.1. Dashboard
1. “Network Status” will show Smile Face when AP5660W stands for
connecting the Internet successfully.
2. “Mesh Network” is shortcut for MESH management page.

Page: 8
3. “System Information” includes “System Information”, “LAN Information”,
IPv6 Information”, “Wireless Information”.

Page: 9
4. “System Settings” is shortcut for System Settings page
5. “Connected Devices” will show Devices Information which device in the
LAN Network.

Page: 10
3.2. Network
AP5660W support CAP mode (Controller AP) and RE mode (Range Extender),
when AP5660W was CAP mode, the Mesh Page will include extra functions,
“WiFi Setting” and “Topology”.