ASROCK gaia 404 User manual

11
11
1
Gaia 404 / Gaia 408 / Gaia 416-60 / Gaia 416-120
Quick Guide
Version 1.0
Published August 2009
Copyright©2009 ASRock INC. All rights reserved.
Copyright©2009 Huper Laboratories CO., LTD. All rights reserved.

22
22
2
Copyright Notice:Copyright Notice:
Copyright Notice:Copyright Notice:
Copyright Notice:
No part of this manual may be reproduced, transcribed, transmitted, or translated in
any language, in any form or by any means without the written consent of hupeLab
and ASRock Inc., except duplication of documentation by the purchaser for backup
purpose.
Products and corporate names appearing in this manual may or may not be regis-
tered trademarks or copyrights of their respective companies, and are used only for
identification or explanation and to the owners’ benefit without intent to infringe.
Disclaimer:Disclaimer:
Disclaimer:Disclaimer:
Disclaimer:
Specifications and information contained in this manual are provided for informational
use only. It is subject to change without notice and should not be recognized as a
commitment by huperLab and ASRock. huperLab and ASRock assume no responsi-
bility for any errors or omissions that may appear in this manual. With respect to the
contents of this manual, huperLab and ASRock do not provide any kind of warranty,
either expressed or implied.
In no event should huperLab and ASRock, its directors, officers, employees, or agents
be liable for any indirect, special, incidental, or consequential damages (including
damages for loss of profits, loss of business, loss of data, interruption of business and
the like).
(EC conformity marking)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate”
For more product details, please visit huperLab’s website at www.huperlab.
com

33
33
3
ContentsContents
ContentsContents
Contents
1 Introduction1 Introduction
1 Introduction1 Introduction
1 Introduction ............................................................................................................
............................................................................................................
...................................................... 55
55
5
1.1 Package Contents ......................................................... 5
1.2 Specifications................................................................ 6
1.3 Motherboard Layout Gaia404 (A330GC-H4) /
Gaia408 (A330GC-H8) .................................................. 9
1.4 Motherboard Layout Gaia416-60 (A330GC-H16-60)
/ Gaia416-120 (A330GC-H16-120) ............................... 10
1.5 I/O Panel ........................................................................ 11
2 Installation2 Installation
2 Installation2 Installation
2 Installation ................................................................................................................
................................................................................................................
........................................................ 1212
1212
12
2.1 Screw Holes.................................................................. 12
2.2 Pre-installation Precautions.......................................... 12
2.3 Installation of Memory Modules (SODIMM) .................. 13
2.4 Expansion Slot (PCIE Slot) .................................................... 14
2.5 Jumpers Setup .............................................................. 14
2.6 Onboard Headers and Connectors ............................... 15
2.7 SATAII Hard Disk Setup Guide ...................................... 17
2.8 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks
Installation ..................................................................... 18
2.9 Driver Installation Guide ............................................ 18
3 BIOS S3 BIOS S
3 BIOS S3 BIOS S
3 BIOS SETUP UTILITYETUP UTILITY
ETUP UTILITYETUP UTILITY
ETUP UTILITY ............................................................................................
............................................................................................
.............................................. 1919
1919
19
3.1 Introduction .................................................................... 19
3.1.1 BIOS Menu Bar .................................................... 19
3.1.2 Navigation Keys ................................................... 20
3.2 Main Screen .................................................................. 20
3.3 Smart Screen ................................................................ 21
3.4 Advanced Screen .......................................................... 22
3.4.1 CPU Configuration ............................................... 23
3.4.2 Chipset Configuration .......................................... 24
3.4.3 ACPI Configuration .............................................. 25
3.4.4 Storage Configuration .......................................... 26
3.4.5 Super IO Configuration ........................................ 28
3.4.6 USB Configuration ............................................... 28
3.5 Hardware Health Event Monitoring Screen ................... 29
3.6 Boot Screen ................................................................... 30
3.6.1 Boot Settings Configuration .................................. 30
3.7 Security Screen ............................................................. 31
3.8 Exit Screen .................................................................... 31

44
44
4
4 Sof4 Sof
4 Sof4 Sof
4 Software Supportware Suppor
tware Supportware Suppor
tware Supportt
tt
t............................................................................................
............................................................................................
.............................................. 3333
3333
33
4.1 Install Operating System............................................... 33
4.2 Support CD Information ................................................. 33
4.2.1 Running Support CD ............................................ 33
4.2.2 Drivers Menu ........................................................ 33
4.2.3 Utilities Menu ....................................................... 33
4.2.4 Contact Information ............................................. 33
5 huperVision Sof5 huperVision Sof
5 huperVision Sof5 huperVision Sof
5 huperVision Software Installationtware Installation
tware Installationtware Installation
tware Installation ..........................................
..........................................
..................... 3434
3434
34
5.1 Easy Steps to install software ....................................... 35
5.2 Start Recording Instruction ............................................ 37
5.3 Playback Recordings Instruction ................................... 40

55
55
5
Chapter 1 IntroductionChapter 1 Introduction
Chapter 1 IntroductionChapter 1 Introduction
Chapter 1 Introduction
Thank you for purchasing huperLab Gaia404 / Gaia408 / Gaia416-60 / Gaia416-120
motherboard, a reliable motherboard produced under huperLab’s consistently strin-
gent quality control. It delivers excellent performance with robust design conforming
to huperLab’s commitment to quality and endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-
step guide to the hardware installation. Chapter 3 and 4 contain the configuration
guide to BIOS setup and information of the Support CD. Chapter 5 contains installa-
tion instruction for huperLab software.
Because the motherboard specifications and the BIOS software might be
updated, the content of this manual will be subject to change without prior
notice. In case any modifications of this manual occur, the updated version
will be available on huperLab website.
huperLab website http://www.huperlab.com
If you require technical support related to this motherboard, please visit the
website for specific information about the model you are using.
http://www.huperlab.com/bboard/
1.1 P1.1 P
1.1 P1.1 P
1.1 Packack
ackack
ackage Contentsage Contents
age Contentsage Contents
age Contents
huperLab Gaia404 / Gaia408 / Gaia416-60 / Gaia 416-120 Motherboard (Mini-ITX
Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm)
huperLab Gaia404 / Gaia408 / Gaia416-60 / Gaia 416-120 User Guide
huperLab Gaia404 / Gaia408 / Gaia416-60 / Gaia 416-120 Driver & Utility Support CD
huperVision 4000 Software CD
Motherboard Accessories
Gaia404: One 4CH Video in & Audio in Cable
Gaia408: One 8CH Video in & Audio in Cable
Gaia416-60 / Gaia 416-120: One 16CH Video in Cable
I/O shield
Audio in Cable with bracket (Optional)
Two Serial ATA (SATA) Data Cable(Optional)

66
66
6
1.21.2
1.21.2
1.2 SpecificationsSpecifications
SpecificationsSpecifications
Specifications
Platform - Mini-ITX Form Factor: 6.7-in x 6.7-in, 17.0 cm x 17.0 cm
- Solid Capacitor design (100% Japan-made
high-quality Conductive Polymer Capacitors)
CPU - Intel®Dual-Core AtomTM Processor 330
- Supports FSB533 MHz
- Supports Hyper-Threading Technology (see CAUTION 1)
- Supports EM64T CPU
Chipset - Northbridge: Intel®945GC
- Southbridge: Intel®ICH7
Memory - Dual Channel DDR2 Memory Technology (see CAUTION 2)
- 2 x DDR2 SODIMM slots
- Supports DDR2 533 / 667/ 800 SODIMM, run at 533 speed,
non-ECC, un-buffered memory
- Max. capacity of system memory: 4GB (see CAUTION 3)
Expansion Slot - 1 x PCI Express slot
Graphics - Intel®Graphics Media Accelerator 950
- Pixel Shader 2.0, DirectX 9.0
- Max. shared memory 224MB (see CAUTION 4)
Audio - 5.1 CH Windows® VistaTM Premium Level HD Audio
(Realtek ALC662 Audio Codec)
LAN - 2 x PCIE Gigabit LAN 10 / 100 / 1000 Mb/s
- Realtek RTL8111DL
- Supports Wake-On-LAN
- Supports Dual LAN features
Rear Panel I/O I/O Panel
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x DVR Audio / Video input
- 1 x Serial Port: COM1
- 1 x VGA Port
- 4 x Ready-to-Use USB 2.0 Ports
- 2 x RJ-45 LAN Ports with LED (ACT/LINK LED and SPEED
LED)
- HD Audio Jack: Line in / Front Speaker / Microphone
Connector - 4 x SATAII 3.0 Gb/s connectors (No Support for RAID and
“Hot Plug” functions) (see CAUTION 5)
- 1 x ATA100 mini IDE connector with 5V power (supports 2 x
IDE devices)
- System / NB FAN connector
- 24 pin ATX power connector

77
77
7
- 2 x USB 2.0 headers (support 4 USB 2.0 ports) (see CAU-
TION 6)
- 16 pin GPIO connector (support 8 GPIO)
- 20 pin Audio input connector (support 16CH Audio in)
- 26 pin Video input connector
BIOS Feature - 4Mb AMI BIOS
- AMI Legal BIOS
- Supports “Plug and Play”
- ACPI 1.1 Compliance Wake Up Events
- AMBIOS 2.3.1 Support
- Supports Smart BIOS
Support CD - Drivers, Utilities, Antivirus Software (Trial Version), huperVision
4000 Surveillance Software Suite
Unique Feature - ASRock Instant Flash (see CAUTION 7)
- Hybrid Booster:
- ASRock U-COP
- Boot Failure Guard (B.F.G.)
Hardware - System Temperature Sensing
Monitor - CPU Temperature Sensing
- NB Fan Tachometer
- System Fan Tachometer
- System Quiet Fan
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore
OS - Microsoft® Windows® XP / VistaTM
Certifications- FCC, CE
* For detailed product information, please visit website: http://www.huperlab.com

88
88
8
CAUTION!
1. About the setting of “Hyper Threading Technology”, please refer to section
3.4.1(page 23)
2. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the instal-
lation guide of memory modules in section 2.3 (page 13) for proper installation.
3. Due to chipset and CPU limitation, the actual memory size might be less
than 4GB for the reservation of system usage under Windows®XP, Win-
dows®VistaTM.
4. The maximum shared memory size is defined by the chipset vendor and is
subject to change. Please check Intel®website for the latest information.
5. Before installing SATAII hard disk to SATAII connector, please read “SATAII
Hard Disk Setup Guide” in section 2.8 (page 18) to adjust your SATAII hard disk
drive to SATAII mode. You can also connect SATA hard disk to SATAII connec-
tor directly.
6. Power Management for USB 2.0 works fine under Microsoft®Windows®
VistaTM / XP SP1 or SP2.
7. ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This
convenient BIOS update tool allows you to update system BIOS without
entering operating systems first like MS-DOS or Windows®. With this utility,
you can press <F6> key during the POST or press <F2> key to BIOS setup
menu to access ASRock Instant Flash. Just launch this tool and save the
new BIOS file to your USB flash drive, floppy disk or hard drive, then you can
update your BIOS only in a few clicks without preparing an additional floppy
diskette or other complicated flash utility. Please be noted that the USB
flash drive or hard drive must use FAT32/16/12 file system.

99
99
9
1.3 Motherboard L1.3 Motherboard L
1.3 Motherboard L1.3 Motherboard L
1.3 Motherboard Layout Gaia404 (A330GCayout Gaia404 (A330GC
ayout Gaia404 (A330GCayout Gaia404 (A330GC
ayout Gaia404 (A330GC-H4) / Gaia408-H4) / Gaia408
-H4) / Gaia408-H4) / Gaia408
-H4) / Gaia408
(A330GC(A330GC
(A330GC(A330GC
(A330GC-H8)-H8)
-H8)-H8)
-H8)
1Clear CMOS Jumper (CLRCMOS1) 13 USB 2.0 Header (USB 4_5, Blue)
2ATX Power Connector (ATXPWR1) 14 PS2_USB_PWR1 Jumper
32 x 200-pin DDR2 SODIMM Slots 15 Watchdog Function Jumper
(Dual Channel: DDRII_1, DDRII_2; White) 16 South Bridge Controller
4BIOS SPI Chip17 NB Fan
5IDE1 Connector (IDE1) 18 GPIO
6SATAII Connector (SATAII_4; Orange) 19 North Bridge Controller
7SATAII Connector (SATAII_2; Red) 20 CPU Heat Sink
8SATAII Connector (SATAII_1; Red) 21 PCIE Slot (PCIE1)
9SATAII Connector (SATAII_3; Orange) 22 Audio In
10 NB Fan Connector (NB_Fan1) 23 Composite Out
11 System Panel Header (PANEL1;Orange) 24 Video In
12 USB 2.0 Header (USB 6_7, Blue) 25 System Fan Connector (SYS_FAN1)

1010
1010
10
1Clear CMOS Jumper (CLRCMOS1) 13 USB 2.0 Header (USB 4_5, Blue)
2ATX Power Connector (ATXPWR1) 14 PS2_USB_PWR1 Jumper
32 x 200-pin DDR2 SODIMM Slots 15 Watchdog Function Jumper
(Dual Channel: DDRII_1, DDRII_2; White) 16 South Bridge Controller
4BIOS SPI Chip17 NB Fan
5IDE1 Connector (IDE1) 18 GPIO
6SATAII Connector (SATAII_4; Orange) 19 North Bridge Controller
7SATAII Connector (SATAII_2; Red) 20 CPU Heat Sink
8SATAII Connector (SATAII_1; Red) 21 PCIE Slot (PCIE1)
9SATAII Connector (SATAII_3; Orange) 22 Audio In
10 NB Fan Connector (NB_Fan1) 23 Composite Out
11 System Panel Header (PANEL1;Orange) 24 Video In
12 USB 2.0 Header (USB 6_7, Blue) 25 System Fan Connector (SYS_FAN1)
1.4 Motherboard L1.4 Motherboard L
1.4 Motherboard L1.4 Motherboard L
1.4 Motherboard Layout Gaia416-60 (A330GCayout Gaia416-60 (A330GC
ayout Gaia416-60 (A330GCayout Gaia416-60 (A330GC
ayout Gaia416-60 (A330GC-H16-60)-H16-60)
-H16-60)-H16-60)
-H16-60)
/ Gaia416-120 (A330GC/ Gaia416-120 (A330GC
/ Gaia416-120 (A330GC/ Gaia416-120 (A330GC
/ Gaia416-120 (A330GC-H16-120)-H16-120)
-H16-120)-H16-120)
-H16-120)

1111
1111
11
1.5 I/O P1.5 I/O P
1.5 I/O P1.5 I/O P
1.5 I/O Panelanel
anelanel
anel
1 PS/2 Mouse Port (Green) 7AV IN Port
*2 LAN RJ-45 Port (LAN1) 8COM Port
*3 LAN RJ-45 Port (LAN2) 9VGA Port
4 Line In (Light Blue) 10 USB 2.0 Ports (USB23)
5 Front Speaker (Lime) 11USB 2.0 Ports (USB01)
6 Microphone (Pink) 12 PS/2 Keyboard Port (Purple)
123
4
5
6
7
8
9
1 0
1 1
1 2
LAN Port
ACT/LINK
LED
SPEED
LED
* There are two LED next to the LAN port. Please refer to the table below for the LAN port LED
indications.
LAN Port LED Indications
Activity / Link LED SPEED LED
Status Description Status Description
Off No Link Off 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

1212
1212
12
Chapter 2 InstallationChapter 2 Installation
Chapter 2 InstallationChapter 2 Installation
Chapter 2 Installation
Gaia404 / Gaia408 / Gaia416-60 / Gaia416-120 are a Mini-IXT form factor (6.7" x
6.7", 17.0 x 17.0 cm) motherboard. Before you install the motherboard, study the
configuration of your chassis to ensure that the motherboard fits into it.
Before installation or removal of the motherboard, please ensure to unplug
thepower cord. Failure to do so may cause physical injuries and
damages to motherboard components.
2.1 Screw Holes2.1 Screw Holes
2.1 Screw Holes2.1 Screw Holes
2.1 Screw Holes
Place screws into the holes indicated by circles to secure the motherboard to the
chassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
2.2 P2.2 P
2.2 P2.2 P
2.2 Pre-installation Pre-installation P
re-installation Pre-installation P
re-installation Precautionsrecautions
recautionsrecautions
recautions
Take note of the following precautions before you install motherboard components or
change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEVER
place your motherboard directly on the carpet or the like. Also remember to use
a grounded wrist strap or touch a safety grounded object before you handle
components.
3. Hold components by the edges and do not touch the ICs.
4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply.
Failure to do so may cause severe damage to the motherboard, peripherals,
and/or components.

1313
1313
13
2.3 Installation of Memor2.3 Installation of Memor
2.3 Installation of Memor2.3 Installation of Memor
2.3 Installation of Memory Modules (SODIMM)y Modules (SODIMM)
y Modules (SODIMM)y Modules (SODIMM)
y Modules (SODIMM)
Gaia404 / Gaia408 / Gaia416-60 / Gaia416-120 motherboard provides two 200-pin
DDR2 (Double Data Rate 2) SODIMM slots, and supports Dual Channel Memory
Technology. For dual channel configuration, you always need to install two
identical (the same brand, speed, size and chip-type) memory modules in the
DDR2 SODIMM slots to activate Dual Channel Memory Technology. Otherwise, it
will operate at single channel mode.
1. It is not allowed to install a DDR memory module into DDR2 slot;
otherwise, this motherboard and SODIMM may be damaged.
2. If you install only one memory module or two non-identical memory
modules, it is unable to activate the Dual Channel Memory Technology.
Installing a SODIMMInstalling a SODIMM
Installing a SODIMMInstalling a SODIMM
Installing a SODIMM
Please make sure to disconnect power supply before adding or removing
SODIMM or the system components.
Step 1. Unlock a SODIMM slot by pressing the retaining clips outward.
Step 2. Align a SODIMM on the slot such that the notch on the SODIMM matches
the break on the slot.
The SODIMM only fits in one correct direction. It will cause permanent dam-
age to the motherboard and the SODIMM if you force the SODIMM into the
slot at incorrect direction.
Step 3. Firmly insert the SODIMM into the slot until the retaining clips at both ends
fully snap back in place and the SODIMM is properly seated.
no tch
no tch

1414
1414
14
2.4 Expansion Slot (PCIE Slot)2.4 Expansion Slot (PCIE Slot)
2.4 Expansion Slot (PCIE Slot)2.4 Expansion Slot (PCIE Slot)
2.4 Expansion Slot (PCIE Slot)
There is One PCIE slot on this motherboard.
PCIE slot: PCIE slot is used for PCI Express cards with x 1 lane width cards, such as
Gigabit LAN card, SATA2 card, etc.
Installing an expansion cardInstalling an expansion card
Installing an expansion cardInstalling an expansion card
Installing an expansion card
Step 1. Before installing the expansion card, please make sure the power supply is
switched off or the power cord is unplugged. Please read the documenta-
tion of the expansion card and make adjustments to hardware settings for
the card before you start the installation.
Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws
for later use.
Step 3. Align the card connector with the slot and press firmly until the card is com-
pletely seated on the slot.
Step 4. Fasten the card to the chassis with screws.
2.5 Jumpers Setup2.5 Jumpers Setup
2.5 Jumpers Setup2.5 Jumpers Setup
2.5 Jumpers Setup
The illustrations show how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is “Short”. When no jumper
cap is placed on pins, the jumper is “Open”.
The illustrations show a 3-pin jumper, whose
pin1 and pin2 are “Short” when jumper cap is
placed on top.
Jumper Setting Description
PS2_USB_PWR1 Short pin2, pin3 to enable
(see p.9/10 No. 14) +5VSB (standby) for PS/2
or USB wake up events.
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
Clear CMOS
(CLRCMOS1, 2-pin jumper)
(see p.9/10 No. 1)
+5VSB
2_3
2-pin jumper
Watchdog Function Jumpter Short pin1-2 to enable
(see p.9/10 No. 15) watchdog, short pin 2-3 to
disable watchdog.
Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system
setup parameters. To clear and reset the system parameters to default setup,
please turn off the computer and unplug the power cord from the power supply.
After waiting for 15 seconds, use a jumper cap to short 2 pins on CLRCMOS1
for 5 seconds.
+5V
1_2

1515
1515
15
USB 2.0 Headers Besides two default USB 2.0
(9-pin USB6_7) ports on the I/O panel, there are
(see p.9/10 No. 12) two USB 2.0 headers on this
motherboard. Each USB 2.0
header cansupport two USB
2.0 ports.
(9-pin USB4_5)
(see p.9/10 No. 13)
USB_PWR
USB_PWR
P+7
P-7
P+6
P-6
GND
GND
DUMMY
1
USB_PWR
USB_PWR
P+5
P-5
P+4
P-4
GND
GND
DUMMY
1
2.6 Onboard Headers and Connectors2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors2.6 Onboard Headers and Connectors
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper
caps over these headers and connectors. Placing jumper caps over the
headers and connectors will cause permanent damage of the
motherboard!
Primary IDE Connector
(43-pin IDE1, see p.10/11 No. 5)
Serial ATAII Connectors These Serial ATAII (SATEII)
(SATAII_1: see p.9/10,No. 8)connectors support SATAII
(SATAII_2: see p.9/10,No. 7)or SATA hard disk for internal
(SATAII_3: see p.9/10,No. 9)storage devices. The current
(SATAII_4: see p.9/10,No. 6)SATAII interface allows up to
3.0 Gb/s data transfer rate.
Serial ATA (SATA) Either end of the SATA data cable
Data Cable can be connected to the SATA /
(Optional) SATAII hard disk or the SATAII
connector on the motherboard.
SATAII_2
SATAII_4
ID E1
PI N1
SATAII_3
SATAII_1
System Panel Header This header accommodates
(9-pin PANEL1) several system front panel
(see p.9/10 No. 11) functions.
GND
PWRBTN#
PLED-
PLED+
DUMMY
RESET#
GND
HDLED+
HDLED-
1

1616
1616
16
20-Pin ATX Power Supply Installation
Though this motherboard provides 4-Pin System fan (Quiet Fan) support, the 3-Pin
System fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin fan to the System fan connector on this
motherboard, please connect it to Pin 1-3.
3-Pin Fan Installation
Pin 1-3 Connected
ATX Power Connector Please connect an ATX power
(24-pin ATXPWR1) supply to this connector.
(see p.9/10 No. 2)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your power
supply along with Pin 1 and Pin 13.
12
1
24
13
12
1
24
13
NB Fan Connector Please connect a NB fan
(3-pin NB_FAN1) cable to this connector and
(see p.9/10 No. 10) match the black wire to the
ground pin.
System Fan Connector Please connect a System fan
(4-pin SYS_FAN1) cable to this connector and
(see p.9/10 No. 25) match the black wire to the
ground pin.
GND
+12V
CHA_FAN_SPEED
GND
+12V
CPU_FAN_SPEED
FAN_SPEED_CONTROL
4 3 2 1

1717
1717
17
2.72.7
2.72.7
2.7 SASA
SASA
SATT
TT
TAII Hard Disk Setup GuideAII Hard Disk Setup Guide
AII Hard Disk Setup GuideAII Hard Disk Setup Guide
AII Hard Disk Setup Guide
Before installing SATAII hard disk to your computer, please carefully read SATAII
hard disk setup guide below. Some default setting of SATAII hard disks may not be
at SATAII mode, which operates with the best performance. In order to enable
SATAII function, please follow the instruction with different vendors to correctly
adjust your SATAII hard disk to SATAII mode in advance; otherwise, your SATAII
hard disk may fail to run at SATAII mode.
Western Digital
If pin 5 and pin 6 are shorted, SATA 1.5Gb/s will be enabled.
On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the
jumpers from pin 5 and pin 6.
SAMSUNG
If pin 3 and pin 4 are shorted, SATA 1.5Gb/s will be enabled.
On the other hand, if you want to enable SATAII 3.0Gb/s, please remove the
jumpers from pin 3 and pin 4.
HITACHI
Please use the Feature Tool, a DOS-bootable tool, for changing various ATA
features. Please visit HITACHI’s website for details:
http://www.hitachigst.com/hdd/support/download.htm
1357
2468
1357
2468
The above examples are just for your reference. For different SATAII hard
disk products of different vendors, the jumper pin setting methods may not
be the same. Please visit the vendors’ website for the updates.
stallation

1818
1818
18
2.82.8
2.82.8
2.8 Serial ASerial A
Serial ASerial A
Serial ATT
TT
TA (SAA (SA
A (SAA (SA
A (SATT
TT
TA) / Serial AA) / Serial A
A) / Serial AA) / Serial A
A) / Serial ATT
TT
TAII (SAAII (SA
AII (SAAII (SA
AII (SATT
TT
TAII) Hard DisksAII) Hard Disks
AII) Hard DisksAII) Hard Disks
AII) Hard Disks
InstallationInstallation
InstallationInstallation
Installation
This motherboard adopts Intel®ICH7 south bridge chipset that supports Serial ATA
(SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks
on this motherboard for internal storage devices. This section will guide you to
install the SATA / SATAII hard disks.
STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk.
STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII
connector.
STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard
disk.
2.92.9
2.92.9
2.9 Driver Installation GuideDriver Installation Guide
Driver Installation GuideDriver Installation Guide
Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order accordingly to install
those required drivers.

1919
1919
19
Chapter 3 BIOS SETUP UTILITYChapter 3 BIOS SETUP UTILITY
Chapter 3 BIOS SETUP UTILITYChapter 3 BIOS SETUP UTILITY
Chapter 3 BIOS SETUP UTILITY
3.13.1
3.13.1
3.1 IntroductionIntroduction
IntroductionIntroduction
Introduction
This section explains how to use the BIOS SETUP UTILITY to configure your system.
The BIOS FWH chip on the motherboard stores the BIOS SETUP UTILITY. You may
run the BIOS SETUP UTILITY when you start up the computer. Please press <F2>
during the Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise,
POST will continue with its test routines.
If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by
pressing <Ctl> + <Alt> + <Delete>, or by pressing the reset button on the system
chassis. You may also restart by turning the system off and then back on.
Because the BIOS software is constantly being updated, the fol-
lowing BIOS setup screens and descriptions are for reference
purpose only, and they may not exactly match what you see on
your screen.
3.1.13.1.1
3.1.13.1.1
3.1.1 BIOS Menu BarBIOS Menu Bar
BIOS Menu BarBIOS Menu Bar
BIOS Menu Bar
The top of the screen has a menu bar with the following selections:
Main To set up the system time/date information
Smart To load the BIOS according to your requirements
Advanced To set up the advanced BIOS features
H/W Monitor To monitor and set up the hardware features
Boot To set up the default system device to locate and load the
operating System
Security To set up the security features
Exit To exit the current screen or the BIOS SETUP UTILITY
Use < > key or < > key to choose among the selections on the menu
bar, and then press <Enter> to get into the sub screen.

2020
2020
20
3.1.23.1.2
3.1.23.1.2
3.1.2 Navigation KNavigation K
Navigation KNavigation K
Navigation Keyseys
eyseys
eys
Please check the following table for the function description of each navigation
key.
Navigation Key(s) Function Description
/ Moves cursor left or right to select Screens
/ Moves cursor up or down to select items
+ / - To change option for the selected items
<Enter> To bring up the selected screen
<F1> To display the General Help Screen
<F9> To load optimal default values for all the settings
<F10> To save changes and exit the BIOS SETUP UTILITY
<ESC> To jump to the Exit Screen or exit the current screen
3.2 Main Screen3.2 Main Screen
3.2 Main Screen3.2 Main Screen
3.2 Main Screen
When you enter the BIOS SETUP UTILITY, the Main screen will appear and
display the system overview.
Gaia404 (A330GC-H4) / Gaia408 (A330GC-H8)
System Time [Hour:Minute:Second]
Use this item to specify the system time.
System Date [Day Month/Date/Year]
Use this item to specify the system date.
BIOS SETUP UTILITY
Main Smart H/W Monitor Boot Security ExitAdvanced
System Overview
System Time
System Date [ :00:09]
[Mon 08/03/2009]
Use [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Time.
Select Screen
Select Item
+- Change Field
Tab Select Field
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
14
BIOS Version
Processor Type
Processor Speed
Microcode Update
Total Memory
Cache Size
DDRII1
DDRII2
: Gaia408 P1.00
: Intel (R) Atom (TM) CPU 330 @
1.60GHz (64bit)
: 1600MHz
: 1024KB
: 106C2/20D
: 2048MB with 8MB shared memory
Dual-Channel Memory Mode
: 1048MB/266MHz (DDRII533)
: 1048MB/266MHz (DDRII533)