Assured Wireless AW12-PC-EI-C BUNDLE User manual

Installation Guide -Vehicle
HIGH POWER USER EQUIPMENT
AW12-PC-EI-C BUNDLE
Created for
TM

Package Contents
Cat5e Ethernet cable
DC power cable (4 pin Molex -pigtail)
AW12-DE-C
Modem
AW12-PC-EI-C
USB-to-Ethernet
Converter
Page 2
HARDWARE CABLES
Insert activated FirstNet SIM into AW12-DE Modem.
USB cable to connect AW12 to PC-EI, 200mm
DC power cable to connect AW12 to PC-EI, 200mm

Connect AW12 to AW12-PC-EI Page 3
Mount AW12 and AW12-EI on the
mounting bracket with the
included hardware.
Connect cables between the AW12
and the AW12-EI. Please note to be
careful and do not over tighten the
screws on the USB-C connector.
AW12-PCDC-2PM-200mm
AW12-USB-AM2CM-200mm

Connect Data, Power and Antenna Cables Page 4
1) Connect vehicle and GPS
antennas to the AW12 (sold
separately)
2) Connect the included
ethernet cable from the AW12-EI
to the WAN port of your router.
3) Connect the included power
cable from the AW12-EI to the
vehicle’s 12vDC power source
Router
+ -
Battery
(12V –24V)
WAN
COMMON
GROUND
COMMON
GROUND
(orange) ignition sense
(red)
(blue) future use
To vehicle power
To antenna
To router