Draytek Vigor2760 User manual

Vigor2760 Series Quick Start Guide
i

Vigor2760 Series Quick Start Guide ii

Vigor2760 Series Quick Start Guide
iii
Vigor2760 Series
High Speed VDSL2 Router
Quick Start Guide
Version: 1.0
Firmware Version:1.0.0_RC12b
(For future update, contact DrayTek)
Date: 21/11/2012

Vigor2760 Series Quick Start Guide
i
Copyright Information
Copyright
Declarations
Copyright 2012 All rights reserved. This publication contains information that is
protected by copyright. No part may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language without written
permission from the copyright holders.
Trademarks
The following trademarks are used in this document:
zMicrosoft is a registered trademark of Microsoft Corp.
zWindows, Windows 95, 98, Me, NT, 2000, XP, Vista and Explorer are
trademarks of Microsoft Corp.
zApple and Mac OS are registered trademarks of Apple Inc.
zOther products may be trademarks or registered trademarks of their
respective manufacturers.
Safety Instructions and Approval
Safety Instructions
zRead the installation guide thoroughly before you set up the router.
zThe router is a complicated electronic unit that may be repaired only be
authorized and qualified personnel. Do not try to open or repair the
router yourself.
zDo not place the router in a damp or humid place, e.g. a bathroom.
zDo not stack the routers.
zThe router should be used in a sheltered area, within a temperature range
of +5 to +40 Celsius.
zDo not expose the router to direct sunlight or other heat sources. The
housing and electronic components may be damaged by direct sunlight
or heat sources.
zDo not deploy the cable for LAN connection outdoor to prevent
electronic shock hazards.
zKeep the package out of reach of children.
zWhen you want to dispose of the router, please follow local regulations
on conservation of the environment.
W
arrant
y
We warrant to the original end user (purchaser) that the router will be free
from any defects in workmanship or materials for a period of two (2) years
from the date of purchase from the dealer. Please keep your purchase receipt in
a safe place as it serves as proof of date of purchase. During the warranty
period, and upon proof of purchase, should the product have indications of
failure due to faulty workmanship and/or materials, we will, at our discretion,
repair or replace the defective products or components, without charge for
either parts or labor, to whatever extent we deem necessary tore-store the
product to proper operating condition. Any replacement will consist of a new
or re-manufactured functionally equivalent product of equal value, and will be
offered solely at our discretion. This warranty will not apply if the product is
modified, misused, tampered with, damaged by an act of God, or subjected to
abnormal working conditions. The warranty does not cover the bundled or
licensed software of other vendors. Defects which do not significantly affect
the usability of the product will not be covered by the warranty. We reserve
the right to revise the manual and online documentation and to make changes
from time to time in the contents hereof without obligation to notify any
person of such revision or changes.
Be a Registered
Owne
r
Web registration is preferred. You can register your Vigor router via
http://www.draytek.com.
Firmware & Tools
Updates Due to the continuous evolution of DrayTek technology, all routers will be
regularly upgraded. Please consult the DrayTek web site for more information
on newest firmware, tools and documents.
http://www.draytek.com

Vigor2760 Series Quick Start Guide ii
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan
303
Product: Vigor2760 Series Router
DrayTek Corp. declares that Vigor2760 Series of routers are in compliance with the following essential
requirements and other relevant provisions of R&TTE Directive 1999/5/EEC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive
2004/108/EC by complying with the requirements set forth in EN55022/Class B and EN55024/Class B.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying
with the requirements set forth in EN60950-1.
Regulatory Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of the following measures:
zReorient or relocate the receiving antenna.
zIncrease the separation between the equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device may accept any interference received, including interference that may cause undesired
operation.
R
RF F E Ex xp po os su ur re e W Wa ar rn ni in ng g
This equipment must be installed and operated in accordance with provided instructions and the antenna(s)
used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions and transmitter operating
conditions for satisfying RF exposure compliance.
C
Ca au ut ti io on n
Any changes or modifications not expressly approved by the grantee of this device could void the user's
authority to operate the equipment.
Please visit http://www.draytek.com/user/SupportDLRTTECE.php#
This product is designed for POTS, DSL, 2.4GHz WLAN network throughout the EC region and
Switzerland with restrictions in France. Please see the user manual for the applicable networks on your
product.

Vigor2760 Series Quick Start Guide
iii
T
Ta ab bl le e o of f C Co on nt te en nt ts s
1. Introduction ........................................................................................1
1.1 Panel Explanation........................................................................................... 2
1.1.1 For Vigor2760................................................................................... 2
1.1.2 For Vigor2760n................................................................................. 4
1.1.3 For Vigor2760Vn............................................................................... 6
1.2 Package Content............................................................................................ 8
2. Installing Your Router ........................................................................9
2.1 Hardware Installation...................................................................................... 9
2.2 Printer Installation..........................................................................................11
3. Configuring Web Pages...................................................................17
3.1 Accessing Web Page.................................................................................... 17
3.2 Basic Configuration....................................................................................... 18
3.3 Wireless LAN Configuration.......................................................................... 22
4. Trouble Shooting..............................................................................25
4.1 Checking If the Hardware Status Is OK or Not.............................................. 25
4.2 Checking If the Network Connection Settings on Your Computer Is OK or Not
........................................................................................................................... 26
4.3 Pinging the Router from Your Computer....................................................... 29
4.4 Checking If the ISP Settings are OK or Not.................................................. 30
4.5 Backing to Factory Default Setting If Necessary........................................... 30
4.6 Contacting Your Dealer................................................................................. 31

Vigor2760 Series Quick Start Guide
1
1
1. . I In nt tr ro od du uc ct ti io on n
The Vigor2760 series are the routers with high speed in data transmission
through DSL port and LAN ports.
With the development of NGN (Next Generation Network), you may
recently hear the news about FTTx deployment in your local area or even
have already subscribed the unbundling last mile service (e.g. VDSL2) from
local ITSP for FTTx. As adopting FTTx, the main question for end users is
whether your legacy router could fully utilize its bandwidth or not.
DrayTek launches Vigor2760 series – High speed router, perfectly complied
with VDSL2 environment including Vigor2760, Vigor2760n and
Vigor2760Vn for speed-wanted customers. With high throughput
performance and secured broadband connectivity provided by Vigor2760
series, you can simultaneously engage these bandwidth-intensive
applications, such as high-definition video streaming, online gaming, and
Internet telephony / access.
Vigor2760 supports up to 2 VPN tunnels using advanced protocols such as
IPSec/PPTP (for remote dial-in only) with AES/3DES for encryption and
MD5/SHA-1 for authentication.
Vigor2760 ‘n’ models comply with 802.11n standards. They support
WEP/WPA/WPA2 encryption and MAC Address Control.
Vigor2760 ‘V’ models provide two analogue phone connectors. It supports
multiple SIP registrars with high flexible configuration and call handing
options.

Vigor2760 Series Quick Start Guide 2
In addition, Vigor2760 series supports two USB interfaces for connecting
USB printer to share the printer or USB storage device for sharing files and
3G backup services.
1
1. .1 1 P Pa an ne el l E Ex xp pl la an na at ti io on n
1
1. .1 1. .1 1 F Fo or r V Vi ig go or r2 27 76 60 0
LED Status Explanation
Blinking The router is powered on and running
normally.
(ACT) Off The router is powered off.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL (Green) Blinking
(Quickly) The connection is training.
On
The port is connected.
~
LAN1/2/3/4
(Green)
Blinking
(Green) The data is transmitting.
~
USB1/2
On A USB device is connected and active.

Vigor2760 Series Quick Start Guide
3
Interface Description
PWR Connector for a power adapter.
I / O Power switch.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
VDSL/ADSL Connector for accessing the Internet.
USB (1-2) Connector for USB storage device or printer or 3G
backup.
LAN (1-4) Connectors for local network devices.

Vigor2760 Series Quick Start Guide 4
1
1. .1 1. .2 2 F Fo or r V Vi ig go or r2 27 76 60 0n n
LED Status Explanation
Blinking The router is powered on and running
normally.
(ACT) Off The router is powered off.
On (Green) The wireless access point is ready.
Blinking
(Green) The data is transmitting via wireless connection.
Blinking
(Orange) Blinks with one second cycle for two minutes. The WPS function is active.
(Wireless LAN
On/Off/WPS)
Off The wireless access point is turned off.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL (Green) Blinking
(Quickly) The router is trying to connect to Internet.
On The port is connected.
~
LAN1/2/3/4
Blinking The data is transmitting.
~
USB1/2
On A USB device is connected and active.

Vigor2760 Series Quick Start Guide
5
Interface Description
PWR Connector for a power adapter.
I / O Power switch.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
WLAN
ON/OFF/WPS WLAN WPS - Press this button for 2 seconds to wait for client device making network connection through
WPS. When the LED lights up, the WPS connection
will be on.
WLAN ON/OFF - Press the button once to enable
(WLAN LED on) or disable (WLAN LED off)
wireless connection.
VDSL/ADSL Connector for accessing the Internet.
USB (1-2) Connector for USB storage device or printer or 3G
backup.
LAN (1-4) Connectors for local network devices.

Vigor2760 Series Quick Start Guide 6
1
1. .1 1. .3 3 F Fo or r V Vi ig go or r2 27 76 60 0V Vn n
LED Status Explanation
Blinking The router is powered on and running
normally.
(ACT) Off The router is powered off.
On A PSTN phone call comes (in and out).
However, when the phone call is
disconnected, the LED will be off for
awhile.
(LINE)
Off There is no PSTN phone call.
On The phone connected to this port is
off-hook.
Off The phone connected to this port is
on-hook.
(Phone1/Phone2)
Blinking A phone call comes.
On (Green) The wireless access point is ready.
Blinking
(Green) The data is transmitting via wireless connection.
Blinking
(Orange) Blinks with one second cycle for two minutes. The WPS function is active.
(Wireless LAN
On/Off/WPS)
Off The wireless access point is turned off.
On The DSL port is connected.
Blinking
(Slowly) The router is ready.
DSL (Green) Blinking
(Quickly) The router is trying to connect to Internet.
On The port is connected.
~
LAN1/2/3/4
Blinking The data is transmitting.
~
USB1/2
On A USB device is connected and active.

Vigor2760 Series Quick Start Guide
7
Interface Description
PWR Connector for a power adapter.
I / O Power switch.
Factory Reset Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
WLAN
ON/OFF/WPS WLAN WPS - Press this button for 2 seconds to wait for client device making network connection through
WPS. When the LED lights up, the WPS connection
will be on.
WLAN ON/OFF - Press the button once to enable
(WLAN LED on) or disable (WLAN LED off)
wireless connection.
VDSL/ADSL Connector for accessing the Internet.
USB (1-2) Connector for USB storage device or printer or 3G
backup.
LAN (1-4) Connectors for local network devices.
Interface Description
Line Connector for PSTN life line.
Phone1/Phone2 Connector of analog phone for VoIP communication.

Vigor2760 Series Quick Start Guide 8
1
1. .2 2 P Pa ac ck ka ag ge e C Co on nt te en nt t
nQuick Start Guide oCD
pRJ-45 Cable (Ethernet) qAntenna (n models)
rThe type of the power adapter depends on the country that the router will
be installed. * The maximum power consumption is 17-23 Watt.
UK-type Power Adapter EU-type Power Adapter
USA/Taiwan-type Power
Adapter AU/NZ-type Power Adapter

Vigor2760 Series Quick Start Guide
9
2
2. . I In ns st ta al ll li in ng g Y Yo ou ur r R Ro ou ut te er r
This section will guide you to install the router through hardware connection
and configure the router’s settings through web browser.
2
2. .1 1 H Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
Before starting to configure the router, you have to connect your devices
correctly. (For the hardware connection, we take “Vn” model as an
example.)
1. Connect the XDSL interface to the external XDSL splitter with an
XDSL line cable for all models. For Vigor2760Vn, also connect Line
interface to external XDSL splitter.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable.
This device allows you to connect 4 PCs directly.
3. Connect Phone port to a conventional analog telephone (for V model
only).
4. Connect detachable antennas to the router for Vigor2760 series (for n
model only).
5. Connect one end of the power cord to the power port of this device.
Connect the other end to the wall outlet of electricity.
6. Power on the router.
7. Check the ACT and DSL, LAN LEDs to assure network connection.

Vigor2760 Series Quick Start Guide 10
(For the detailed information of LED status, please refer to section 1.1.)

Vigor2760 Series Quick Start Guide
11
2
2. .2 2 P Pr ri in nt te er r I In ns st ta al ll la at ti io on n
You can install a printer onto the router for sharing printing. All the PCs
connected this router can print documents via the router. The example
provided here is made based on Windows XP/2000. For Windows
98/SE/Vista, please visit www.draytek.com.
Before using it, please follow the steps below to configure settings for
connected computers (or wireless clients).
1. Connect the printer with the router through USB port.
2. Open Start->Settings-> Printer and Faxes.

Vigor2760 Series Quick Start Guide 12
3. Open File->Add a New Computer. A welcome dialog will appear.
Please click Next.
4. Click Local printer attached to this computer and click Next.
5. In this dialog, choose Create a new port Type of port and use the drop
down list to select Standard TCP/IP Port. Click Next.