Astraada AS47CN08 User manual

User Manual
Astraada HMI Panel PC
AS47CN08, AS47CN10, AS47CN15, AS47CN17, AS47CN21
The owner of Astraada brand is ASTOR company

AS47CN Series User Manual
1
Warning!________________________
Avertissement!___________________
Risque de choc électrique - Ne pas faire fonctionner la machine avec son capot
arrière enlevé. Des tensions dangereuses sont élevées à l'intérieur.
Cet équipement génère, utilise et peut émettre une énergie de
radiofréquence et s'il n'est pas installé et utilisé conformément au manuel
d'instructions, il peut provoquer des interférences dans les communications
radio. Il a été testé et approuvé conforme aux limites pour un dispositif de classe
A et selon les règles de la FCC, qui sont conçues pour fournir une protection
raisonnable contre de telles interférences dans un environnement commercial. Le
fonctionnement de cet équipement dans une zone résidentielle est susceptible
de provoquer des interférences, dans ce cas l'utilisateur, à ses propres frais, devra
faire le nécessaire pour prendre toutes les mesures requises pour corriger le
problème.
Electric Shock Hazard –Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instructions manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protection against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.

AS47CN Series User Manual
2
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Precaution
Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect.
Les piles usagée doivent être recyclées dans la mesure du possible. La mise au
rebut des piles usagées doit resecter les réglementations locales en vigueur en
matière de protection de l'environnement.

AS47CN Series User Manual
3
Packing List
Accessories (as ticked) included in this package are:
□Adaptor
□Driver & manual CD disc
□Other.___________________(please specify)

AS47CN Series User Manual
4
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Don‘t touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.
Consignes de sécurité
Suivez les messages ci-dessous pour éviter que vos systèmes contre
les dommages:
◆Éviter votre système contre l'électricité statique sur toutes les
occasions.
◆Évitez les chocs électriques. Ne pas toucher les composants de cette
carte lorsque la carte est sous tension. Toujours débrancher lorsque le
système n'est pas en cours d'utilisation.
◆Couper l'alimentation électrique lorsque vous changez tous les
périphériques matériels. Par exemple, lorsque vous connectez un
cavalier ou d'installer des cartes, une forte augmentation de la
puissance peut endommager les composants électroniques ou
l'ensemble du système.

AS47CN Series User Manual
5
Table of Contents
Revision History…………………………………………………………………………………………………….1
Warning!/Avertissement!......................................................…………………………….…2
Caution/Precaution……………….……..………………………………………………………………………3
Packing List…………………………………….……………………………………………………………………..4
Safety Precautions/Consignes de sécurité………………………………….…..……………………..5
Chapter 1 Getting Started
1.1 Features………………………..………………………...…………………………..8
1.2 Specifications…………………...………………………………………………….8
1.3 Dimensions………………………....…………………………………………….11
1.4 Brief Description of AS47CN…..….………………………….……17
1.5 Installation of HDD –7”/8”…………..…………...…………………..…..22
1.6 Installation of HDD –10.1”/15.6”/18.5”………………………………24
1.7 Installation of HDD –12.1”/15”/17”/21.5”………………….……….25
1.8 VESA Mounting…………………………………..………………………………27
1.9 Panel Mounting……………………………………..………………….……….27
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....28
2.2 Specifications…………………………..…………………………………………28
2.3 Jumpers and Connectors Location……………………………………...32
2.4 Jumpers Setting and Connectors…………………………………..……33
Chapter 3 BIOS Setup
3.1 Operations after POST Screen…...…….……...…………………………61
3.2 BIOS Setup Utility……………………………………………………………….61
3.3 Main Settings……………………………………..………………………………62
3.4 Advanced Settings……………………………………………………………...63
3.5 Chipset Settings……………………………………….………………………...71
3.6 Security Settings…………………………………………….…………………..73
3.7 Boot Settings…..………………………………………….……………………..74
3.8 Save & Exit Settings……………………………………..…………………....75
Chapter 4 Installation of Drivers
4.1 Intel (R) AtomTM SoC Chipset ………..……...………….………………78

AS47CN Series User Manual
6
4.2 Intel (R) VGA Chipset……………………………………………….……......81
4.3 Intel (R) LAN Driver………..………………………………………..………...85
4.4 Realtek ALC662 HD Audio Driver Installation………………………88
4.5 USB 3.0 Driver…………………………………………………………………….90
Chapter 5 Touch Screen Installation
5.1 Windows XP/2003/Vista/WIN7 Universal Driver Installation for
PenMount 6000 Series...……………….…………………………………...93
5.2 Software Functions…………………………………………………………..103
Figures
Figure 1.1: Dimensions of AS47CN07.……………………..……………......11
Figure 1.2: Dimensions of AS47CN08.……………………..………………...11
Figure 1.3: Dimensions of AS47CN10.……………………..…………………12
Figure 1.4: Dimensions of AS47CN12.……………………..…………………12
Figure 1.5: Dimensions of AS47CN15.……………………..…………………13
Figure 1.6: Dimensions of AS47CN16(Resistive Touch)..……….…………13
Figure 1.7: Dimensions of AS47CN16(Projected Capacitive Touch)...14
Figure 1.8: Dimensions of AS47CN17..……………………………………….14
Figure 1.9: Dimensions of AS47CN18….……………………………………..15
Figure 1.10: Dimensions of AS47CN21(Resistive Touch)………………….15
Figure 1.11: Dimensions of AS47CN21(Projected Capacitive Touch).16
Figure 1.12: Front View of AS47CN Series…………………………………..17
Figure 1.13: Rear View of AS47CN07/08……………………………………..…18
Figure 1.14: Rear View of AS47CN10………………………………………….….18
Figure 1.15: Rear View of AS47CN12………………………………………….….19
Figure 1.16: Rear View of AS47CN15………………………………………….….19
Figure 1.17: Rear View of AS47CN16……………………………………….….….20
Figure 1.18: Rear View of AS47CN17……………………………………….….….20
Figure 1.19: Rear View of AS47CN18………………………………………….….21
Figure 1.20: Rear View of AS47CN21………………………………………………21
Figure 1.21: AS47CN Series VESA Mounting………………………………………27
Figure 1.22: AS47CN Series Panel Mounting……………………………………...27
Figure 2.1: Motherboard Dimensions………………………………………….…….31
Figure 2.2: Jumpers and Connectors Location-Board Top……………….….32
Figure 2.3: Jumpers and Connectors Location-Board Bottom…………..…32

AS47CN Series User Manual
7
Chapter 1 Getting Started
1.1 Features
7”/8”/10.1”/12.1”/15”/15.6”/17”/18.5”/21.5” Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel Bay Trail N2930(1.83GHz) CPU built-in/E3845(1.91GHz) for option
Onboard 2GB DDR 3L 1600 MHz/4GB(option)
9~36VDC wide-ranging power input
IP65 compliant front panel
Optional projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
AS47CN Series
System
CPU
Onboard Intel Bay Trail N2930(1.83GHz )/E3845(1.91GHz) for option
Chipset
SoC
Memory
Onboard 2GB DDR 3L 1600 MHz/4GB(option)
IO Port
USB
1 x USB 2.0 type A
1 x USB 3.0 type A
Serial/Parallel
1 x RS-232 DB-9(COM2)
1 x DB-9 RS-232/422/485 (Default RS-232)(COM1)
Audio
1 x Audio Line Out
LAN
2 x GbE LAN RJ-45
Power
1 x 3-pin DC Power input terminal
1 x 2-pin connector for power on/off button
Option
(Not available for
AS47CN07 and
AS47CN08)
2 x RS-232 DB-9 + 1 x Mini-PCIe slot via TB-528C2ME1
2 x CAN bus via TB-528CAN2
2 x USB 2.0 type A Via TB-528U2
2 x USB 2.0 type A + 1 x Mini-PCIe slot + 1xRS-232 DB-9 via TB-528C1U2P1
(TB-528C1U2 for AS47CN10)

AS47CN Series User Manual
8
Storage Space
Storage
1 x SD card slot, up to 32GB
1 x MO-297 SATA SSD bay (Easy Accessible) (for 7”/8”)
1 x 2.5" SATA HDD bay for SATA HDD (Easy Accessible)
Expansion
Expansion Slot
1 x Internal Mini-PCIe slot full size
Touch Screen –Resistive Touch Window Type
TS Control IC
PenMount 6000 on Board
Interface
USB
Light
Transmission(%)
Over 80%
Touch Screen –Projected Capacitive Type
TS Control IC
Chip on tail
Interface
USB
Light
Transmission(%)
Over 90%
Power
Power Input
9~36V/DC
Mechanical
Construction
RAL 9007
IP Rating
IP65 compliant front panel
Environmental
Operating
temperature(°C)
0~50℃
Storage
temperature(°C)
-20~60℃
Storage humidity
10 to 90% @ 40°C, non- condensing
Certification
CE / FCC Class A
Operating System Support
OS Support
Windows Embedded Compact 7, Windows 7, Windows Embedded Standard
7, Windows 8, Windows Embedded 8 Standard, Windows 8.1
Windows Embedded 8.1 Industry

AS47CN Series User Manual
9
AS47CN07
AS47CN08
AS47CN10
AS47CN12
AS47CN15
Display
Display Type
7”TFT LCD
8”TFT LCD
10.1”TFT LCD
12.1”TFT LCD
15”TFT LCD
Max. Resolution
800 x 480
800 x 600
1280 x 800
800 x 600
1024 x 768
Max. Color
262K
16.2M
16.2M
16.2M
16.2M
Luminance(cd/m²)
350
350
350
450
300
Contrast Ratio
400 : 1
500 : 1
800 : 1
800 : 1
800 : 1
Viewing angle
140(H)/110(V)
140(H)/125(V)
160(H)/160(V)
160(H)/140(V)
170(H)/170(V)
Backlight Lifetime
40,000 hrs
40,000 hrs
40,000 hrs
50,000 hrs
50,000 hrs
Mounting
VESA Mount 75 x 75
VESA Mount 100 x 100
Dimensions(mm)
202 x 149 x 40
231 x 176 x 50
285 x 189 x 49
319 x 243 x 52
410 x 310 x 55
AS47CN16
AS47CN17
AS47CN18
AS47CN21
Display
Display Type
15.6”TFT LCD
17”TFT LCD
18.5”TFT LCD
21.5”TFT LCD
Max. Resolution
1366 x 768
1280 x 1024
1366 x 768
1920 x 1080
Max. Color
16.7M
16.7M
16.7M
16.7M
Luminance (cd/m²)
300
350
300
250
Contrast Ratio
500 : 1
1000 : 1
1000 : 1
3000 : 1
Viewing angle
160 (H)/ 160 (V)
170 (H)/ 160 (V)
170 (H)/ 160 (V)
178 (H)/ 178 (V)
Backlight Lifetime
50,000 hrs
30,000 hrs
50,000 hrs
30,000 hrs
Mounting
VESA Mount 100 x 100
Dimensions(mm)
412 x 277.5 x 60.4
439 x 348 x 64.8
499.6 x 314.6 x 60
557 x 362 x 64.8

AS47CN Series User Manual
10
1.3 Dimensions
Figure 1.1: Dimensions of AS47CN07
Figure 1.2: Dimensions of AS47CN08

AS47CN Series User Manual
11
Figure 1.3: Dimensions of AS47CN10
Figure 1.4: Dimensions of AS47CN12

AS47CN Series User Manual
12
Figure 1.5: Dimensions of AS47CN15
Figure 1.6: Dimensions of AS47CN16 (Resistive Touch)

AS47CN Series User Manual
13
Figure 1.7: Dimensions of AS47CN16 (Projected Capacitive Touch)
Figure 1.8: Dimensions of AS47CN17

AS47CN Series User Manual
14
Figure 1.9: Dimensions of AS47CN18
Figure 1.10: Dimensions of AS47CN21 (Resistive Touch)

AS47CN Series User Manual
15
Figure 1.11: Dimensions of AS47CN21 (Projected Capacitive Touch)

AS47CN Series User Manual
16
1.4 Brief Description of AS47CN
There are 7”, 8”, 10.1”, 12.1”, 15”, 15.6”, 17”, 18.5”and 21.5”Industrial
Compact Size Panel PC in AS47CN series, which comes with flat front panel touch
screen and fanless design. It is powered by Intel Bay Trail E3845(1.91GHz) or
N2930(1.83GHz) CPU built-in, 2GB DDR3L 1600 MHz (4GB is for option). AS47CN
series is 9~36V DC wide-ranging power input and IP65 compliant front panel.
Optional projected capacitive touch support 7H anti-scratch surface is ideal for use as
PC-based controller for Industrial Automation & Factory Automation.
Figure 1.12: Front View of AS47CN Series

AS47CN Series User Manual
17
Figure 1.13: Rear View of AS47CN07/AS47CN08
Figure 1.14: Rear View of AS47CN10

AS47CN Series User Manual
18
Figure 1.15: Rear View of AS47CN12
Figure 1.16: Rear View of AS47CN15

AS47CN Series User Manual
19
Figure 1.17: Rear View of AS47CN16
Figure 1.18: Rear View of AS47CN17