ASTRO Ulti Box User manual

Warning
Installation Guide
Warning
Package Content
Please read the entire Installation Guide thoroughly and retain it for future reference. TheAstro and Kaon Media
will not take any responsibility for accidents or damage resulting from careless handling by the user.
 Always follow these instructions to avoid the risk of injury to yourself or damage to your equipment.
 Unplug the receiver from the power outlet before cleaning.
 Use only a damp cloth for cleaning the exterior of the receiver.
 Do not use accessories or attachments not recommended by the manufacturer.
 Do not replace the receiver on an unstable cart, stand, tripod, bracket, or table.
 Operate the receiver using only the type of power source indicated on the marking label.
 Do not place the receiver in an enclosure such as a cabinet without proper ventilation.
 The receiver may fall, causing serious personal injury and damage to the receiver.
 Do not stack the receiver on top of or below other electronic devices.
AstroHD Box InstallationGuide
HDMICable
RemoteControl with Battery
PowerAdapter UserGuide
InstallationGuide
Warning
PackageContent
PleasereadtheentireInstallationGuidethoroughly and retain it for future reference. The Astro and Kaon Media
willnottakeanyresponsibilityforaccidents or damage resulting from careless handling by the user.
 Alwaysfollowtheseinstructionstoavoidthe risk of injury to yourself or damage to your equipment.
 Unplugthereceiverfromthepoweroutlet before cleaning.
 Useonlyadampclothforcleaning the exterior of the receiver.
 Donotuseaccessoriesorattachmentsnot recommended by the manufacturer.
 Donotreplacethereceiveronan unstable cart, stand, tripod, bracket, or table.
 Operatethereceiverusingonlythetype of power source indicated on the marking label.
 Donotplacethereceiverinan enclosure such as a cabinet without proper ventilation.
 Thereceivermayfall,causingseriouspersonal injury and damage to the receiver.
 Donotstackthereceiverontop of or below other electronic devices.
AstroHDBox InstallationGuide
HDMICable
RemoteControlwithBattery
PowerAdapter UserGuide

4. You will be given the option to connect the
Internet via LAN Cable or Wi-Fi. Choose
either one of those options, or you may s
select “Skip” to proceed.
* For new installlation, skip this step and
connect to Internet once Astro account
is active
3. If you are installing this box as Satellite,
choose Satellite. Please ensure your box
is connected with Satellite cable.
(Satellite)

5. Please select your LNB type. Depending
on your setup, it could be either Universal,
SatCR or dCSS. Select “Next” to proceed.
6. Please select: 01 M3B VL - 10732 as the
entry point. Select “Next” to proceed.
7. Please ensure that the signal strength is
at least 80 in both top and bottom bars
and the signal quality is full.
Select “Finish” to complete the setup
8. Once setup is done, you will be brought to
the Home Screen.
(Satellite)

4. You will be given the option to connect the
Internet via LAN Cable or Wi-Fi. Choose
either one of those options.
3. If you are installing this box as Plug &
Play, choose IPTV Plug & Play (self-install).
(Plug & Play)

5. Validate your connection status. Press
“Next/Finish” to Proceed.
6. Once your Astro account is active, you will
see a channel and press Home on your
remote to show Home Screen.
(Plug & Play)

-
- -
-