AstroAI LY2006A User manual

-V1.0-
Mini Fridge
6L Mirror Fridge User Manual
Model:
LY2006A

This manual contains important information regarding the safety,
operation, maintenance, and storage of this product. Before
usage, read and understand all warnings, instructions and
product labels. Failure to do so could result in possibly injury or
property damage. Please keep this manual for future reference.
Thank you for purchasing the AstroAI 6L Mirror Fridge. This is a
portable fridge that can be used with both a 12-volt car and a
standard wall outlet. With an included chill and heat function,
you’ll be able to keep everything at the perfect temperature.
We hope you enjoy your new Mini Refrigerator! Questions or
Concerns? Youarewelcometocontactuswithyourquestionvia

SAFETY INFORMATION
●The fridge should connect to 110V power supply. (Countries with
different voltages need to select products with corresponding
voltages.)
●When using the 12V vehicle power supply, the fridge should not be
left connected for long periods of time when the engine is not
running.
●Please do not connect the fridge with the 24V cigarette lighter of a
heavy-duty vehicle.
●Unplug this fridge during lightning storms or when not in use for long
periods of time to prevent damages.
●Do not open or remove covers in case of any dangers.
●To avoid the risk of fire or electric shock, please avoid overloading the
socket, extension cord or other devices.
●Use the right power supply according to the instructions in the user
manual or the specifications on the fridge.
●The supply voltage should be the same as that indicated in the
technical specifications and the appliance rating plate.
●In order to disconnect the fridge from power supplies completely,
please unplug the fridge.
●Do not bend, stretch or pull the supply cable in case of electric shocks.
●When installed, the power socket must be within easy reach.
●Avoid using locations where dust or other airborne contamination
may be drawn into the fan.
●Never leave the fridge running in poorly ventilated areas such as a
car’s trunk.
● Handle with ease and do not squeeze. Keep upright.
●Do not sit on the fridge.
●Allow at least 2 inches of distance from the back and sides of the
device to allow proper air circulation and heat dispersal.
●Allow 30 minutes for the fridge to return to room temperature before
attempting to switch from warming to cooling mode, or vice versa.
● Keep the product away from rains or any corrosive gases or liquids.
●Disconnect the power supply when not in use for a long time, the
fridge should be stored in a dry, cool and well-ventilated area away
from direct sunlight.
●For safety, children must operate under the supervision of an adult.

DIAGRAM
OFF
WARM COOL
NON-
ECO
DC 12V
AC
ECO
Carrying Handle
Door Handle
DimmableLEDLight
LED light Button
Cool Indicator Light
Warm Indicator Light
Cool Button/
OFF Button/Warm Button
Non-ECO Mode/ECO Mode
DC Power Port
AC Power Port
Adjustable Shelf
Door Basket
AC Power Cord
DC Power Cord

SIZE DESCRIPTION
INSTRUCTIONS
I .
CONNECTING THE 12V POWER SUPPLY
ADVICE: Please do not remove the protective film as dust may
contaminate the mirrored door, when we use the fridge in the
car frequently.
●
Switch the Warm Button/OFF Button/Cool
Button to OFF position before connecting the
plug to the socket. The OFF Button is located in
the middle of the Warm Button and Cool
Button, when OFF Button is pressed, both of
the indicator lights will not light.
●
Insert the power cord into the DC power port
at the rear of the fridge. DC 12V
OFF
WARM COOL
10.63in 7.68in
5.9in 5.6in
9.53in
11.8in
330ml
330ml

II .
CONNECTING THE 110V HOUSEHOLD POWER SUPPLY
●
Switch the Mode Button to OFF position
Before connecting the plug to the socket.
When the OFF Button is pressed, both of the
indicator lights will not light up.
●
Insert the power cord into the AC power port
at the rear of the fridge.
●
Place the fridge on a stable surface and plug
the power cord into the 12V socket.
●
Switch the Warm Button/OFF Button/Cool Button to Cool
Button side, the green indicator light will be lit up, switch
Warm Button/OFF Button/Cool Button to Warm side, the red
indicator light will be lit up.
●
The shelf is adjustable to fit different items of different
heights.
●
Please remove the protective film before use; for clear sight.
After long use, please clean the mirrored door gently; for
better use experience. The cleaning method of the mirrored
door is included in the User Manual.
WARNING:
Running the fridge may drain the vehicle’s battery while your
vehicle is off.
OFF
WARM COOL
AC

ECO MODE
●ENERGY SAVING MODE. The lowest cooling temperature in this mode
is higher than that in the non-ECO mode, the cooling rate is slower
than that in the non-ECO mode, and the noise is much lower than
that in the non-ECO mode.
●The fridge will default to a mode. If the noise is too loud, you can
switch from non-ECO mode to ECO mode; If you are not satisfied with
the cooling operation, you can switch from ECO mode to non-ECO
mode.
●
Secure the fridge in place and insert the power
cord into the wall outlet.
●
Switch to the Cool Button, the green indicator light will be lit
up, switch to the Warm Button, the red indicator light will be
lit up.
●
When the mirrored door is in use, you can press the LED light
Button to adjust the light’s intensity.
●
The shelf is adjustable to fit different items of different
heights.
COOL MODE TIPS
● To achieve the quickest cooling, fill the fridge with beverages which
have already been refrigerated.
●The fridge is not only suitable for beverages, but also suitable for
cosmetics and makeup products.
●The lowest possible temperature depends on the ambient
environment. The lowest temperature the fridge can achieve may rise
if the ambient temperature is too high.

WARM MODE TIPS
MAINTENANCE
●The fridge is designed to keep items warm. It is not designed to heat
up cold items.
●
Hot items will stay warm for several hours after the fridge has been
turned off, provided that the door is closed properly.
●Make sure the fridge is disconnected before regular maintenance.
●
Use wet cloth or mild cleanser to clean the appearance of the fridge.
●
When not in use, please keep the interior of the fridge completely dry
and store it well.
●
Please place the fridge up-straight. Do not squeeze it.
THE CLEANING METHOD OF THE MIRROR
TROUBLE-SHOOTING
● The sanitizer is a nice option for cleaning the mirror.
●
Use a soft cloth dipped in some wax to clean the mirror.
●
Use a soft cloth dipped in milk to clean the mirror.
●
Apply soap on the mirror first, then use a dry cloth to wipe the
mirror.
●
Skin toner and dishwashing liquid are useful for cleaning the mirror.
●Check the indicator lights (warm/cool indicator
light); if the lights stop working, please check
the power connection.
●Check the plug to ensure it is in a good
contact; clear the dirt on the plug if needed.
●Turn on the car power first (for car use).
●Ensure the working voltage matches the local
voltage (for home use); only for 12V cigarette
lighter (for car use).
Fridge is
not working

SPECIFICATIONS
●Ensure the switch is on the the ‘ Cool ’ side.
●Check if the fan works well (contact AstroAI for
help if not).
●The lowest possible temperature depends on
the ambient environment but will not be lower
than 32
°F
. The cooler the ambient
temperature it is, the colder the fridge can
become.
The cooler
is not working
● DO NOT open or close the door too frequently
or open for a long time.
●DO NOT directly cool hot objects.
Condensation
Water
●Ensure the power supply is connected well.
●Check if the LED light button is working
properly.
Dimmable LED
light not working
●Allow at least 2 inches distance from the wall,
to ensure proper air circulation and heat
dissipation.
●DO NOT use the fridge in a high temperature
environment.
●DO NOT directly cool hot objects.
Poor heat
dissipation
Mini Fridge
Model
Operating
temperature
Certifications
Ambient Temp - 32
°F
Chill
140°F (60°C) Heat
ETL / CE / PSE / UKCA / RoHS
LY2006A
Capacity 6L

1 YEAR LIMITED WARRANTY FROM ASTROAI
Each AstroAI 6L Mirror Fridge will be free from defects in material
and workmanship. This warranty does not cover damage from
neglect, misuse, contamination, alteration, accident, or abnormal
conditions of operation or handling. This warranty covers the
original purchaser only and is not transferable.
AstroAIalwayswantstoprovideourcustomerswithexcellent
productsaswellascustomerservice.Toknowmoreaboutus,
pleasevisitastroai.com.
Input voltage
DC12V
cool mode: 40W
warm mode: 32W
cool mode: 0.7A
50/60Hz
warm mode: 0.63A
50/60Hz
cool mode: 50W
50/60Hz
warm mode: 40W
50/60Hz
cool mode: 50W
50/60Hz
warm mode: 40W
50/60Hz
AC100 - 120V
(USA)
AC100 - 110V
(JP)
AC200 -240V
(DE/UK/FR/ES)
Class II
construction
Table of contents
Other AstroAI Refrigerator manuals