Asus MB19 Series User manual

MB19 Series/
MB17 Series
LCD Monitor
User Guide
MENU

ii
Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form
or by any means, except documentation kept by the purchaser for backup purposes, without the
express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or
altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the
serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,
ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR
ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY
OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identication or
explanation and to the owners’ benet, without intent to infringe.
E2624
First Edition V1
May 2006

iii
Table of contents
Notices ................................................................................................ iv
Safety information ............................................................................... v
Care & Cleaning .................................................................................. vi
Package contents...............................................................................viii
Chapter 1: Product introduction
1.1 Features................................................................................ 1-2
1.2 Assembling the monitor base ............................................... 1-2
1.3 Monitor introduction ............................................................. 1-3
Front of the LCD monitor ..................................................... 1-3
Rear of the LCD monitor ...................................................... 1-5
Chapter 2: Setup
2.1 Connecting the cables .......................................................... 2-2
2.2 Turning the monitor on......................................................... 2-3
2.3 Adjusting the monitor........................................................... 2-3
Chapter 3 General Instruction
3.1 OSD (On-Screen Display) menu ........................................... 3-2
3.2 Troubleshooting (FAQ) ......................................................... 3-4
3.3 Specication summary.......................................................... 3-5
3.4 Supported operating modes ............................................... 3-11

iv
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus set out in the Radio Interference
Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian
ICES-003.
As an Energy Star® Partner, our company has determined that this product
meets the Energy Star® guidelines for energy efciency.

v
Safety information
• Before setting up the monitor, carefully read all the documentation that
came with the package.
• To prevent re or shock hazard, never expose the monitor to rain or
moisture.
• Never try to open the monitor cabinet. The dangerous high voltages
inside the monitor may result in serious physical injury.
• If the power supply is broken, do not try to x it by yourself. Contact a
qualied service technician or your retailer.
• Before using the product, make sure all cables are correctly connected
and the power cables are not damaged. If you detect any damage,
contact your dealer immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or
over a radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply
to your home, consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power
standard.
• Do not overload power strips and extention cords. Overloading can
result in re or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the
monitor in any area where it may become wet. Place the monitor on a
stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a
long period of time. This will protect the monitor from damage due to
power surges.
• Never push objects or spill liquid of any kind into the slots on the
monitor cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate congured receptacles marked
between 100-240V AC.
• If you encounter technical problems with the monitor, contact a
qualied service technician or your retailer.

vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect
the cables and power cord. Follow the correct lifting techniques when
positioning the monitor. When lifting or carrying the monitor, grasp the
edges of the monitor. Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the
monitor surface with a lint-free, non-abrasive cloth. Stubborn stains
may be removed with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner
intended for use with the LCD. Never spray cleaner directly on the
screen, as it may drip inside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:
• The screen may icker during the initial use due to the nature of the
uorescent light. Turn off the Power Switch and turn it on again to
make sure that the icker disappears.
• You may nd slightly uneven brightness on the screen depending on the
desktop pattern you use.
• When the same image is displayed for hours, an afterimage of the
previous screen may remain after switching the image. The screen will
recover slowly or you can turn off the Power Switch for hours.
• When the screen becomes black or ashes, or cannot work anymore,
contact your dealer or service center to x it. Do not repair the screen
by yourself!
Conventions used in this guide
WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when
trying to complete a task.
IMPORTANT: Information that you MUST follow to complete a task.
NOTE: Tips and additional information to aid in completing a task.

vii
Where to nd more information
Refer to the following sources for additional information and for product
and software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation, such
as warranty card, that may have been added by your dealer. These
documents are not part of the standard package.

viii
Package contents
Check your MB19/MB17 Series LCD package for the following items:
LCD monitor
Quick Start Guide
Support CD
1 x Power cord
1 x VGA cable
1 x DVI cable (MB19TU only)
1 x Audio cable
1 x Cable holder
If any of the above items is damaged or missing, contact your retailer
immediately.

Chapter 1
Product introduction
This chapter gives a general description of
the ASUS LCD monitor MB19/MB17 Series.
The chapter lists the monitor features
including introduction on the front and rear
panels.

1-2 Chapter 1: Product introduction
1.1 Features
• 19”/17” LCD Monitor
• Recommended resolution: 1280 X 1024
• MB19TU: 2ms (Gray to Gray) Rapid response time
MB19SE/MB17SE: 5ms (Tr+Tf) Quick response time
• SPLENDID™ Video Enhancement Technology
• 5 Video preset modes switiched by hotkey
• 3 Skin-tones selection
• Microsoft Windows®2000/XP compliance
• VESA Display Data Channel DDC2B compliance
• VESA wall mount compliance (100x100mm)
• EPA ENERGY STAR® and ergonomic design
• Both VGA and DVI-D Inputs (MB19TU only)
• 2W x 2 Stereo speakers and earphone output
• RoHS compliance
1.2 Assembling the monitor base

1-3ASUS LCD Monitor MB19 Series/MB17 Series
1.3 Monitor introduction
Front of the LCD monitor
1. Headphone port . This port connects a headphone with a stereo
mini-plug (3.5mm).
2. “S” Button:
• Use this hotkey to switch from ve video preset modes (Game
Mode, Night View Mode, Scenery Mode, Standard Mode, Theater
Mode) with SPLENDID™ Video Enhancement Technology.
• Exit the OSD menu or go back to the previous menu as the OSD
menu is active.
• Automatically adjust the image to its optimized position, clock,
and phase by pressing the button for 2-4 seconds.
3. “-” Button:
• Press this button to decrease the value of the function selected
or move to the previous fuction.
• This is also a hotkey for Volume adjustment.
MENU
Base
Stereo
speakers
MENU
21 3 4 5 6

1-4 Chapter 1: Product introduction
4. “+” Button:
• Press this button to increase the value of the function selected
or move to the next function.
• This is also a hotkey for Brightness adjustment.
5. Button:
• Press this button to enter/select the icon (function) highlighted
while the OSD menu is activated.
6. Power Button
• Press this button to turn the monitor on/off.
• The table below shows the status of the LED indicator beside this
button.
Status Description
Blue ON
Amber Standby mode
OFF OFF
The headphone is purchased separately.

1-5ASUS LCD Monitor MB19 Series/MB17 Series
Rear of the LCD monitor
1. AC-in port. This port connects the power connector by the bundled
power cord.
2. DVI port. (MB19TU only) This 24-pin port is for PC (Personal
Computer) DVI-D digital signal connection.
3. VGA port. This 15-pin port is for PC VGA connection.
4. Audio-in port. This port connects PC audio source by the bundled
audio cable .
AC IN DIGITAL ANALOG AUDIO
AC IN
DIGITAL
ANALOG AUDIO
1234

1-6 Chapter 1: Product introduction

Chapter 2
Setup
This chapter provides instructions on how to
correctly connect cables and properly adjust
the angle of the LCD monitor.

2-2 Chapter 2: Setup
2.1 Connecting the cables
1. Connect the cables as shown:
AC IN
DIGITAL
ANALOG AUDIO
• To connect the audio cable: connect one end of the audio cable to
the monitor’s Audio-in port, and then connect the other end to the
computer multi-media (or audio) card’s audio output.
• To connect the power cord: connect one end of the power cord
securely to the monitor’s AC input port, the other end to a power
outlet.
• To connect the VGA/DVI cable:
a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port.
b. Connect the other end of the VGA/DVI cable to your computer’s
VGA/DVI port.
c. Tighten the two screws to secure the VGA/DVI connector.
2. Gather all the cables, then hold them with the cable holder. Align the
cable holder to the two slots near the base and close it carefully. A
click indicates that the cable holder has been closed securely.
Power cord
DVI cable
VGA cable
Audio cable
Cable
holder

2-3ASUS LCD Monitor MB191SE/MB191TU
2.2 Turning the monitor on
Press the power button . See page 1-4 for the location of the power
button. The power indicator beside the power button lights up in blue to
show that the monitor is ON.
2.3 Adjusting the monitor
You can adjust the monitor as shown below.
• For optimal viewing, we recommend that you look at the full face
of the monitor, then adjust the monitor to the angle that is most
comfortable for you.
• Hold the stand to prevent the monitor from falling when you change
its angle.
• You can adjust the monitor’s angle from -5º to 20º.
-5º~20º
MENU

2-4 Chapter 2: Setup

Chapter 3
General Instruction
This chapter introduces the operating
instruction, including how to use the
OSD (On-Screen Display) menu.

3-2 Chapter 3: General Instruction
3.1 OSD (On-Screen Display) menu
OSD MENU TABLE
The table describes the function of each OSD icon.
Main Menu
Item
Main
Menu
Icon
Sub Menu
Item
Sub
Menu
Icon
Description
Splendid
Scenery
Mode
Advance for scenery use with SPLENDID™ Video
Enhancement
Standard
Mode
Advance for general Windows use (SPLENDID™
Off)
Theater
Mode
Advance for movie use with SPLENDID™ Video
Enhancement
Game Mode Advance for game use with SPLENDID™ Video
Enhancement
Night Mode Advance for dark-display use with SPLENDID™
Video Enhancement
Color
Adjust
RGB
Color R
Adjust red gain
Color G
Adjust green gain
Color B
Adjust blue gain
Skin Tone
Reddish
Select reddish skin
stone
Natural
Select natural skin
stone
Yellowish
Select yellowish skin
stone
Color Temp
Cool
The image appears
bluer. (9300°K)
Normal
Normal image color.
(7500°K)
Warm
The image appears
redder. (6500°K)
Luminance
Brightness
Adjust brightness level
Contrast
Adjust contrast level
OSD Setup
OSD H-
Position
Adjust horizontal position of the OSD
OSD V-
Position
Adjust vertical position of the OSD
OSD
Timeout
Adjust OSD timeout