Asus Va24dcp User manual

VA24DCP / VA27DCP

LCD Monitor

User Guide

First Edition

January 2021

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM

ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN

THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Contents ...................................................................................................... iii

Notices......................................................................................................... iv

Safety information ...................................................................................... vi

Care & Cleaning......................................................................................... vii

Takeback Services.................................................................................... viii

Product information for EU energy label................................................ viii

Chapter 1: Product introduction

1.1 Welcome! .................................................................................... 1-1

1.2 Package contents......................................................................... 1-1

1.3 Monitor introduction .................................................................... 1-2

1.3.1 Front view ....................................................................... 1-2

1.3.2 Back view........................................................................ 1-3

Chapter 2: Setup

2.1 Assembling the monitor arm/base ............................................. 2-1

2.2 Detaching the arm/base (for VESA wall mount)........................ 2-2

2.3 Adjusting the monitor.................................................................. 2-3

2.4 Connecting the cables................................................................. 2-4

2.5 Turning on the monitor................................................................ 2-4

Chapter 3: General instructions

3.1 OSD (On-Screen Display) menu ................................................ 3-1

3.1.1 How to recongure.......................................................... 3-1

3.1.2 OSD function introduction ............................................... 3-2

3.2 Specicationssummary............................................................ 3-10

3.3 Outline dimensions.................................................................... 3-12

3.4 Troubleshooting (FAQ).............................................................. 3-14

3.5 Supported operating modes ..................................................... 3-15

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

ENERGY STAR complied product

ENERGY STAR is a joint program of the U.S. Environmental

Protection Agency and the U.S. Department of Energy helping us all

save money and protect the environment through energy efcient

products and practices.

All ASUS products with the ENERGY STAR logo comply with the ENERGY

STAR standard, and the power management feature is enabled by default. The

monitor and computer are automatically set to sleep after 10 and 30 minutes of

user inactivity. To wake your computer, click the mouse or press any key on the

keyboard. Please visit http://www.energystar.gov/powermanagement for detail

information on power management and its benets to the environment. In addition,

please visit http://www.energystar.gov for detail information on the ENERGY STAR

joint program.

NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating

system.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio

noise emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

This Class B digital apparatus meets all requirements of the Canadian

Interference - Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Réglement sur le matériel brouiller du Canada.

Safety information

• Before setting up the monitor, carefully read all the documentation that came

with the package.

• To prevent re or shock hazard, never expose the monitor to rain or moisture.

• Never try to open the monitor cabinet. The dangerous high voltages inside the

monitor may result in serious physical injury.

• If the power supply is broken, do not try to x it by yourself. Contact a qualied

service technician or your retailer.

• Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• Slots and openings on the back or top of the cabinet are provided for

ventilation. Do not block these slots. Never place this product near or over a

radiator or heat source unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated

on the label. If you are not sure of the type of power supply to your home,

consult your dealer or local power company.

• Use the appropriate power plug which complies with your local power standard.

• Do not overload power strips and extention cords. Overloading can result in re

or electric shock.

• Avoid dust, humidity, and temperature extremes. Do not place the monitor in

any area where it may become wet. Place the monitor on a stable surface.

• Unplug the unit during a lightning storm or if it will not be used for a long period

of time. This will protect the monitor from damage due to power surges.

• Never push objects or spill liquid of any kind into the slots on the monitor

cabinet.

• To ensure satisfactory operation, use the monitor only with UL listed

computers which have appropriate congured receptacles marked between

100-240V AC.

• If you encounter technical problems with the monitor, contact a qualied

service technician or your retailer.

• Adjustment of the volume control as well as the equalizer to other settings

than the center position may increase the ear-/headphones output voltage and

therefore the sound pressure level.

This symbol of the crossed out wheeled bin indicates that the product (electrical,

electronic equipment, and mercury-containing button cell battery) should not

be placed in municipal waste. Please check local regulations for disposal of

electronic products.

AEEEyönetmeliğineuygundur

vii

Care & Cleaning

• Before you lift or reposition your monitor, it is better to disconnect the cables

and power cord. Follow the correct lifting techniques when positioning the

monitor. When lifting or carrying the monitor, grasp the edges of the monitor.

Do not lift the display by the stand or the cord.

• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor

surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed

with a cloth dampened with mild cleaner.

• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended

for use with the monitor. Never spray cleaner directly on the screen, as it may

drip inside the monitor and cause an electric shock.

The following symptoms are normal with the monitor:

• You may find slightly uneven brightness on the screen depending on the

desktop pattern you use.

• When the same image is displayed for hours, an afterimage of the previous

screen may remain after switching the image. The screen will recover slowly or

you can turn off the Power Switch for hours.

• When the screen becomes black or ashes, or cannot work anymore, contact

your dealer or service center to x it. Do not repair the screen by yourself!

Conventions used in this guide

WARNING: Information to prevent injury to yourself when trying to

complete a task.

CAUTION: Information to prevent damage to the components when trying

to complete a task.

IMPORTANT: Information that you MUST follow to complete a task.

NOTE: Tips and additional information to aid in completing a task.

viii

A third-party certification according to ISO 14024

Say hello

to a more sustainable product

IT products are associated with a wide range of sustainability risks

throughout their life cycle. Human rights violations are common in the

factories. Harmful substances are used both in products and their

manufacture. Products can often have a short lifespan because of poor

ergonomics, low quality and when they are not able to be repaired or

upgraded.

This product is a better choice. It meets all the criteria in TCO Certified,

the world’s most comprehensive sustainability certification for IT

products. Thank you for making a responsible product choice, that help

drive progress towards a more sustainable future!

Criteria in TCO Certified have a life-cycle perspective and balance

environmental and social responsibility. Conformity is verified by

independent and approved verifiers that specialize in IT products, social

responsibility or other sustainability issues. Verification is done both

before and after the certificate is issued, covering the entire validity

period. The process also includes ensuring that corrective actions are

implemented in all cases of factory non-conformities. And last but not

least, to make sure that the certification and independent verification is

accurate, both TCO Certified and the verifiers are reviewed regularly.

Want to know more?

Read information about TCO Certified, full criteria documents, news and

updates at tcocertified.com. On the website you’ll also find our Product

Finder, which presents a complete, searchable listing of certified

products.

Toward sustainable IT products

Wheretondmoreinformation

Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS websites worldwide provide updated information on ASUS

hardware and software products. Refer to http://www.asus.com

2. Optional documentation

Your product package may include optional documentation that may have

been added by your dealer. These documents are not part of the standard

package.

Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest

standards for protecting our environment. We believe in providing solutions for

our customers to be able to responsibly recycle our products, batteries and other

components as well as the packaging materials.

Please go to http://csr.asus.com/english/Takeback.htm for detail recycling

information in different region.

Product information for EU energy label