Asus A7V600 Technical manual

1 ASUS A7V600 Technical Updates
Technical Updates
A7V600 Motherboard
A7V600 Technical Updates
IE1372
3.4.2Entering VIA
®
Tech RAID BIOS Utility (page 3-9)
1. Boot-up your computer.
2. During POST, press <Del> to enter the BIOS setup utility.
3. From the BIOS setup, select Advanced -> PCI Configuration ->
Onboard ATA Device First. See page 2-22.
4. Set the Onboard ATA Device First field to [Yes]. Save settings and
exit.
5. During POST, press <Tab> to enter VIA RAID configuration utility.
The following menu options will appear.
Channel Drive Name Array Name Mode Size(GB) Status
Serial_Ch0 Master XXXXXXXXXX xxxxx xxx.xx Hdd
Serial_Ch1 Master XXXXXXXXXX xxxxx xxx.xx Hdd
VIA Tech. RAID BIOS Ver 1.XX
Create Array
Delete Array
Create/Delete Spare
Select Boot Array
Serial Number View
Create a RAID array with
the hard disk attached to
VIA IDE controller
F1 : View Array/Disk Status
,  : Move to next item
Enter: Confirme the selection
ESC : Exit
The RAID BIOS information on the setup screen shown is for reference only.
What you see on your screen may not be exactly the same as shown.
On the upper-right side of the screen is the message and legend box. The keys on
the legend box allows you to navigate through the setup menu options. The
message describes the function of each menu item. The following lists the keys
found in the legend box with their corresponding functions.
F1 : View Array/Disk Status
↑, ↓:Move to the next item
Enter : Confirm the selection
ESC : Exit