Asus P10S-C/4L User manual

Motherboard
P10S-C/4L

ii
E10447
First Edition
September 2015
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,
AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO
RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS
MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.

iii
Contents
Notices ...................................................................................................................... vii
Federal Communications Commission Statement.........................................vii
Canadian Department of Communications Statement...................................vii
REACH ......................................................................................................vii
Safety information.................................................................................................... viii
Electrical safety............................................................................................. viii
Operation safety............................................................................................ viii
Australia statement notice...............................................................................ix
Specifications Summary............................................................................................ xi
Chapter 1: Product Introduction
1.1 Welcome! ....................................................................................................1-3
1.2 Package contents ...................................................................................... 1-3
1.3 Serial number label....................................................................................1-4
1.4 Special features..........................................................................................1-4
1.4.1 Product highlights........................................................................ 1-4
1.4.2 Innovative ASUS features........................................................... 1-6
Chapter 2: Hardware Information
2.1 Before you proceed ...................................................................................2-3
2.2 Motherboard overview............................................................................... 2-4
2.2.1 Placement direction..................................................................... 2-4
2.2.2 Screw holes................................................................................. 2-5
2.2.3 Motherboard layout ..................................................................... 2-6
2.2.4 Layout contents........................................................................... 2-7
2.3 Central Processing Unit (CPU) .................................................................2-9
2.3.1 Installing the CPU ....................................................................... 2-9
2.3.2 Installing the CPU heatsink....................................................... 2-12
2.3.3 Uninstalling the CPU heatsink and fan...................................... 2-13
2.3.4 Installing the CPU heatsink in rack ........................................... 2-14
2.4 System memory .......................................................................................2-15
2.4.1 Overview ................................................................................... 2-15
2.4.2 Memory congurations.............................................................. 2-15
2.4.3 Installing a DIMM on a single clip DIMM socket........................ 2-16

iv
Contents
2.5 Expansion slots........................................................................................2-17
2.5.1 Installing an expansion card......................................................2-17
2.5.2 Conguring an expansion card ................................................. 2-17
2.5.3 Interrupt assignments................................................................ 2-18
2.5.4 PCI Express x16 slot (x16 Gen3 link) ....................................... 2-18
2.5.5 PCI Express x8 slot (x8 Gen3 link) ........................................... 2-18
2.5.6 PCI slot...................................................................................... 2-18
2.5.7 Installing the Baseboard Management Card............................. 2-20
2.5.8 Installing the Audio card............................................................ 2-21
2.6 Onboard LEDs..........................................................................................2-22
2.7 Jumpers ....................................................................................................2-25
2.8 Connectors ...............................................................................................2-29
2.8.1 Rear panel connectors.............................................................. 2-29
2.8.2 Q-Code table............................................................................. 2-30
2.8.3 Internal connectors.................................................................... 2-32
Chapter 3: Powering Up
3.1 Starting up for the first time...................................................................... 3-3
3.2 Powering off the computer........................................................................3-4
3.2.1 Using the OS shut down function................................................ 3-4
3.2.2 Using the dual function power switch.......................................... 3-4
Chapter 4: BIOS Setup
4.1 Managing and updating your BIOS ..........................................................4-3
4.1.1 ASUS CrashFree BIOS 3 utility................................................... 4-3
4.1.2 ASUS EzFlash Utility................................................................... 4-4
4.1.3 BUPDATER utility ....................................................................... 4-5
4.2 BIOS setup program ..................................................................................4-7
4.2.1 BIOS menu screen...................................................................... 4-8
4.2.2 Menu bar..................................................................................... 4-8
4.2.3 Menu items.................................................................................. 4-9
4.2.4 Submenu items ........................................................................... 4-9
4.2.5 Navigation keys........................................................................... 4-9
4.2.6 General help................................................................................ 4-9
4.2.7 Conguration elds ..................................................................... 4-9
4.2.8 Pop-up window............................................................................ 4-9
4.2.9 Scroll bar..................................................................................... 4-9

v
Contents
4.3 Main menu ................................................................................................4-10
4.3.1 System Date.............................................................................. 4-10
4.3.2 System Time ............................................................................. 4-10
4.4 Advanced menu .......................................................................................4-11
4.4.1 Trusted Computing.................................................................... 4-12
4.4.2 Chipset Conguration................................................................ 4-12
4.4.3 Platform Conguration .............................................................. 4-22
4.4.4 CPU Conguration .................................................................... 4-32
4.4.5 SATA Conguration .................................................................. 4-36
4.4.6 Network Stack Conguration .................................................... 4-38
4.4.7 CSM Conguration ................................................................... 4-39
4.4.8 iSCSI Conguration................................................................... 4-40
4.5 Security menu ..........................................................................................4-41
4.6 Boot menu ................................................................................................4-43
4.7 Monitor menu ...........................................................................................4-45
4.8 Tool menu.................................................................................................4-45
4.9 Save & Exit menu.....................................................................................4-46
4.10 Server Mgmt menu................................................................................... 4-47
4.11 Event Logs menu .....................................................................................4-50
Chapter 5: RAID Configuration
5.1 Setting up RAID.......................................................................................... 5-3
5.1.1 RAID denitions .......................................................................... 5-3
5.1.2 Installing hard disk drives............................................................ 5-4
5.1.3 Setting the RAID mode in BIOS.................................................. 5-4
5.1.4 RAID conguration utilities.......................................................... 5-4
5.2 Intel®Rapid Storage Technology enterprise
SATA Option ROM Utility...........................................................................5-5
5.2.1 Creating a RAID set .................................................................... 5-6
5.2.2 Deleting a RAID set.....................................................................5-8
5.2.3 Resetting disks to Non-RAID ...................................................... 5-9
5.2.4 Exiting the Intel®Rapid Storage Technology
enterprise SATA Option ROM utility.......................................... 5-10
5.2.5 Rebuilding the RAID..................................................................5-10
5.2.6 Setting the Boot array in the BIOS Setup Utility........................ 5-12

vi
Contents
5.3 Intel®Rapid Storage Technology enterprise (Windows)...................... 5-13
5.3.1 Creating a RAID set .................................................................. 5-14
5.3.2 Changing a Volume Type..........................................................5-16
5.3.3 Deleting a volume ..................................................................... 5-17
5.3.4 Preferences............................................................................... 5-18
Chapter 6: Driver Installation
6.1 RAID driver installation .............................................................................6-3
6.1.1 Creating a RAID driver disk......................................................... 6-3
6.1.2 Installing the RAID controller driver............................................. 6-5
6.2 Management applications and utilities installation ................................6-7
6.3 Running the Support DVD......................................................................... 6-7
6.3.1 Drivers menu tab......................................................................... 6-8
6.3.2 Utilities menu tab.........................................................................6-8
6.3.3 Manual menu tab ........................................................................ 6-9
6.3.4 Contact information menu........................................................... 6-9
6.3.5 Installing the Intel®Chipset device Software driver................... 6-10
6.4 Installing the Intel®I210 Gigabit Adapters driver.................................. 6-13
6.5 Installing the VGA driver .........................................................................6-16
Appendix
A.1 P10S-C/4L block diagram......................................................................... A-2
ASUS contact information...................................................................................... A-3

vii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
manufacturer’s instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department of
Communications.
This class B digital apparatus complies with Canadian ICES-003.
The use of shielded cables for connection of the monitor to the graphics card is required to
assure compliance with FCC regulations. Changes or modications to this unit not expressly
approved by the party responsible for compliance could void the user’s authority to operate
this equipment.
REACH
Complying with the REACH (Registration, Evaluation, Authorization, and Restriction of
Chemicals) regulatory framework, we publish the chemical substances in our products at ASUS
REACH website at http://csr.asus.com/english/REACH.htm.

viii
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the electrical outlet
before relocating the system.
• When adding or removing devices to or from the system, ensure that the power cables for
the devices are unplugged before the signal cables are connected. If possible, disconnect
all power cables from the existing system before you add a device.
• Before connecting or removing signal cables from the motherboard, ensure that all power
cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These devices
could interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your area. If you are
not sure about the voltage of the electrical outlet you are using, contact your local power
company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied service
technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read all the manuals
that came with the package.
• Before using the product, make sure all cables are correctly connected and the power cables
are not damaged. If you detect any damage, contact your dealer immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots,
sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in any area
where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualied service technician
or your retailer.
DO NOT throw the motherboard in municipal waste. This product has been designed to enable
proper reuse of parts and recycling. This symbol of the crossed out wheeled bin indicates that
the product (electrical and electronic equipment) should not be placed in municipal waste.
Check local regulations for disposal of electronic products.
DO NOT throw the mercury-containing button cell battery in municipal waste. This symbol of the
crossed out wheeled bin indicates that the battery should not be placed in municipal waste.

ix
Australia statement notice
From 1 January 2012 updated warranties apply to all ASUS products, consistent with the
Australian Consumer Law. For the latest product warranty details please visit http://support.asus.
com. Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for any
other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at
http://support.asus.com

x
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used
throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when trying to
complete a task.
CAUTION: Information to prevent damage to the components when trying to
complete a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text Indicates a menu or an item to select.
Italics Used to emphasize a word or a phrase.
<Key> Keys enclosed in the less-than and greater-than sign means
that you must press the enclosed key.
Example: <Enter> means that you must press the Enter or
Return key.
<Key1> + <Key2> + <Key3> If you must press two or more keys simultaneously, the key
names are linked with a plus sign (+).
Example: <Ctrl> + <Alt> + <Del>
Command
Means that you must type the command exactly as shown,
then supply the required item or value enclosed in brackets.
Example: At DOS prompt, type the command line:
format A:/S