Asus P5ld2-vm se User manual

Motherboard

P5LD2-VM SE

iiii

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OFANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

IN NO EVENT SHALLASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IFASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUALARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME

WITHOUT NOTICE,AND SHOULD NOT BE CONSTRUEDAS ACOMMITMENT BYASUS.

ASUSASSUMES NO RESPONSIBILITY OR LIABILITY FORANY ERRORS OR

INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

E2679E2679

E2679

First Edition V1First Edition V1

First Edition V1

June 2006June 2006

June 2006

iiiiii

iii

Contents

Notices ................................................................................................ vi

Safety information ............................................................................. vii

About this guide ............................................................................... viii

Typography ......................................................................................... ix

P5LD2-VM SE specifications summary ................................................ x

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.1 Welcome! .............................................................................. 1-2

1.2 Package contents ................................................................. 1-2

1.3 Special features .................................................................... 1-2

1.3.1 Product highlights ................................................... 1-2

1.3.2 Innovative ASUS features ....................................... 1-5

1.4 Before you proceed .............................................................. 1-6

1.5 Motherboard overview .......................................................... 1-7

1.5.1 Placement direction ................................................ 1-7

1.5.2 Screw holes ............................................................ 1-7

1.5.3 Motherboard layout ................................................ 1-8

1.6 Central Processing Unit (CPU) .............................................. 1-9

1.6.1 Installling the CPU ................................................... 1-9

1.6.2 Installling the CPU heatsink and fan ..................... 1-12

1.6.3 Uninstalling the CPU heatsink and fan .................. 1-14

1.7 System memory ................................................................. 1-16

1.7.1 Overview ............................................................... 1-16

1.7.2 Memory configurations ......................................... 1-16

1.7.3 DDR2 Qualified Vendors List ................................ 1-17

1.7.4 Installing a DIMM ................................................... 1-18

1.7.5 Removing a DIMM ................................................. 1-18

1.8 Expansion slots ................................................................... 1-19

1.8.1 Installing an expansion card .................................. 1-19

1.8.2 Configuring an expansion card .............................. 1-19

1.8.3 Interrupt assignments .......................................... 1-20

1.8.4 PCI slots ................................................................ 1-21

1.8.5 PCI Express x16 .................................................... 1-21

1.8.6 PCI Express x1 ...................................................... 1-21

1.9 Jumpers .............................................................................. 1-22

iviv

Contents

1.10 Connectors ......................................................................... 1-23

1.10.1 Rear panel connectors .......................................... 1-23

1.10.2 Internal connectors ............................................... 1-25

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

2.1 Managing and updating your BIOS ........................................ 2-2

2.1.1 Creating a bootable floppy disk .............................. 2-2

2.1.2 ASUS EZ Flash utility .............................................. 2-3

2.1.3 AFUDOS utility ........................................................ 2-4

2.1.4 ASUS CrashFree BIOS 2 utility ................................ 2-6

2.1.5 ASUS Update utility ................................................ 2-8

2.2 BIOS setup program ........................................................... 2-11

2.2.1 BIOS menu screen ................................................. 2-12

2.2.2 Menu bar ............................................................... 2-12

2.2.3 Navigation keys .................................................... 2-12

2.2.4 Menu items ........................................................... 2-13

2.2.5 Sub-menu items ................................................... 2-13

2.2.6 Configuration fields .............................................. 2-13

2.2.7 Pop-up window ..................................................... 2-13

2.2.8 Scroll bar .............................................................. 2-13

2.2.9 General help .......................................................... 2-13

2.3 Main menu .......................................................................... 2-14

2.3.1 System Time ......................................................... 2-14

2.3.2 System Date ......................................................... 2-14

2.3.3 Legacy Diskette A ................................................ 2-14

2.3.4 Primary, Third and Fourth IDE Master/Slave ......... 2-15

2.3.5 IDE Configuration .................................................. 2-16

2.3.6 System Information .............................................. 2-18

2.4 Advanced menu .................................................................. 2-19

2.4.1 JumperFree Configuration .................................... 2-19

2.4.2 USB Configuration ................................................. 2-22

2.4.3 CPU Configuration ................................................. 2-23

2.4.4 Chipset ................................................................. 2-25

2.4.5 Onboard Devices Configuration ............................ 2-26

2.4.6 PCI PnP ................................................................. 2-28

Contents

2.5 Power menu ........................................................................ 2-29

2.5.1 Suspend Mode ...................................................... 2-29

2.5.2 ACPI 2.0 Support .................................................. 2-29

2.5.3 ACPI APIC Support ................................................ 2-29

2.5.4 APM Configuration ................................................ 2-30

2.5.5 Hardware Monitor ................................................. 2-32

2.6 Boot menu .......................................................................... 2-34

2.6.1 Boot Device Priority .............................................. 2-34

2.6.2 Boot Settings Configuration ................................. 2-35

2.6.3 Security ................................................................ 2-36

2.7 Exit menu ........................................................................... 2-38

Chapter 3: Software supportChapter 3: Software support

Chapter 3: Software support

3.1 Installing an operating system ............................................. 3-2

3.2 Support CD information ........................................................ 3-2

3.2.1 Running the support CD ......................................... 3-2

3.2.2 Drivers menu .......................................................... 3-3

3.2.3 Utilities menu .......................................................... 3-4

3.2.4 Manuals menu ......................................................... 3-5

3.2.5 ASUS Contact information ...................................... 3-6

vivi

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with CanadianThis class B digital apparatus complies with Canadian

This class B digital apparatus complies with Canadian

ICES-003.ICES-003.

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes or

modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

viivii

vii

Safety information

Electrical safetyElectrical safety

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal cables

are connected. If possible, disconnect all power cables from the existing

system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you

are using, contact your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read

all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

viiiviii

viii

About this guide

This user guide contains the information you need when installing and

configuring the motherboard.

How this guide is organizedHow this guide is organized

How this guide is organized

This manual contains the following parts:

••

•Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports. This chapter also lists the hardware setup

procedures that you have to perform when installing system

components. It includes description of the jumpers and connectors on

the motherboard.

••

•Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setupChapter 2: BIOS setup

Chapter 2: BIOS setup

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are also

provided.

••

•Chapter 3: Software supportChapter 3: Software support

Chapter 3: Software supportChapter 3: Software support

Chapter 3: Software support

This chapter describes the contents of the support CD that comes

with the motherboard package.

Where to find more informationWhere to find more information

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1.1.

1. ASUS websitesASUS websites

ASUS websitesASUS websites

ASUS websites

The ASUS website provides updated information on ASUS hardware

and software products. Refer to the ASUS contact information.

2.2.

2. Optional documentationOptional documentation

Optional documentationOptional documentation

Optional documentation

Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These

documents are not part of the standard package.

ixix

Conventions used in this guideConventions used in this guide

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

Typography

DANGER/WARNING:DANGER/WARNING:

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION:CAUTION:

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE:NOTE:

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT:IMPORTANT:

IMPORTANT: Instructions that you MUST follow to complete a

task.

Bold textBold text

Bold text Indicates a menu or an item to select

Italics

Used to emphasize a word or a phrase

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key

Example: <Enter> means that you must press the Enter or

Return key

<Key1+Key2+Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+)

Example: <Ctrl+Alt+D>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in

brackets

Example: At the DOS prompt, type the command line:

afudos /i[filename]

afudos /iP5LD2VMS.ROM

P5LD2-VM SE specifications summary

(continued on the next page)

CPUCPU

CPU

ChipsetChipset

Chipset

Front Side BusFront Side Bus

Front Side Bus

MemoryMemory

Memory

VGAVGA

VGA

Expansion slotsExpansion slots

Expansion slots

StorageStorage

Storage

AudioAudio

Audio

LANLAN

LAN

USBUSB

USB

Rear panelRear panel

Rear panel

LGA775 socket for Intel

Core™2 Extreme/Core™2 Duo/

Pentium

D/Pentium

4/Celeron

D processors

Compatible with Intel

05B/05A/06B processors

Supports Intel

Enhanced Memory 64 Technology (EM64T)

Supports Enhanced Intel SpeedStep

Technology (EIST)

Supports Intel

Hyper-Threading Technology

Northbridge: Intel

945G

Southbridge: Intel

ICH7

1066(Support Intel

Core™2 Processors only)

/800/533 MHz

Dual-channel memory architecture

2 x DIMM, max. 2GB, DDR2 667/533 MHz,

non-ECC, un-bufferred DIMMs

Integrated Intel

Graphics Media Accelerator 950

1 x PCI Express x16 slot for discrete graphics cards

1 x PCI Express x1

2 x PCI slots

Intel

ICH7 SouthBridge supports:

- 1 x Ultra DMA 100/66/33

- 4 x Serial ATA 3Gb/s ports

Realtek

ALC882 8-channel High-Definition audio CODEC

S/PDIF out interface support

Universal Audio Jack (UAJ

) Sensing Technology support

Intel

Gigabit LAN controller

Supports up to 8 USB 2.0 ports

1 x Parallel port

1 x LAN (RJ-45) port

4 x USB 2.0 ports

1 x VGA port

1 x Serial port (COM)

1 x PS/2 keyboard port

1 x PS/2 mouse port

8-channel high-definition audio I/O ports

xixi

*Specifications are subject to change without notice.

P5LD2-VM SE specifications summary

BIOS featuresBIOS features

BIOS features

Special featuresSpecial features

Special features

Industry standardIndustry standard

Industry standard

ManageabilityManageability

Manageability

InternalInternal

Internal

connectorsconnectors

connectors

PowerPower

Power

RequirementRequirement

Requirement

Form FactorForm Factor

Form Factor

Support CDSupport CD

Support CD

contentscontents

contents

4 Mb Flash ROM, AMI BIOS, PnP, WfM2.0, DMI2.0,

SM BIOS 2.3, ASUS EZ Flash, CrashFree BIOS2, C.P.R.

(CPU Parameter Recall)

ASUS AI Overclocking

ASUS EZ Flash

ASUS CrashFree BIOS 2

ASUS MyLogo™

ASUS CPR (CPU Parameter Recall)

PCI 2.2, USB 2.0

WfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE,

Chassis Intrussion

2 x USB 2.0 connectors for 4 additional USB 2.0 ports

1 x CPU fan connector

1 x Chassis fan connector

1 x 24-pin EATX power connector

1 x 4-pin ATX 12 V power connector

1 x CD in connector

1 x Chassis intrusion connector

1 x Front panel high-definition audio connector

1 x S/PDIF out connector

ATX power supply (with 24-pin and 4-pin 12 V plugs)

Micro-ATX form factor: 9.6 in x 9.6 in

Device drivers

ASUS PC Probe II

ASUS Live Update utility

Anti-virus software (OEM version)

xiixii

xii

ASUS P5LD2-VM SEASUS P5LD2-VM SE

ASUS P5LD2-VM SE 1-11-1

1-11-1

1-1

Product

introduction

This chapter describes the motherboard

features and the new technologies

it supports.

1-21-2

1-2 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.1 Welcome!

Thank you for buying an ASUSThank you for buying an ASUS

Thank you for buying an ASUS

®®

P5LD2-VM SE motherboard!P5LD2-VM SE motherboard!

P5LD2-VM SE motherboard!

The motherboard delivers a host of new features and latest technologies,

making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it,

check the items in your package with the list below.

1.2 Package contents

Check your motherboard package for the following items.

MotherboardMotherboard

Motherboard ASUS P5LD2-VM SE motherboard

CablesCables

Cables 1 x Serial ATA signal cables

1 x Ultra DMA 133 cable

1 x Floppy disk drive cable

AccessoriesAccessories

Accessories I/O shield

Application CDsApplication CDs

Application CDs ASUS motherboard support CD

DocumentationDocumentation

Documentation User guide

If any of the above items is damaged or missing, contact your retailer.

1.3 Special features

1.3.11.3.1

1.3.1 Product highlightsProduct highlights

Product highlightsProduct highlights

Product highlights

Latest processor technologyLatest processor technology

Latest processor technology

The motherboard comes with a 775-pin surface mount Land Grid Array

(LGA) socket designed for the Intel

Pentium

D, Intel

Pentium

4 or Intel

Celeron

processor in the 775-land package. The motherboard supports

the Intel

Pentium

4 or Intel

Pentium

D processor with 800/533 MHz

Front Side Bus (FSB). The motherboard also supports the Intel

Hyper-Threading Technology and is fully compatible with Intel

05B/05A/

06B processors. See page 1-9 for details.

IntelIntel

Intel

Dual-Core Technology CPU supportDual-Core Technology CPU support

Dual-Core Technology CPU support

The motherboard supports dual-core processors containing two physical

CPU cores with dedicated L2 caches to meet demands for more powerful

processing. See page 1-9 for details.

ASUS P5LD2-VM SEASUS P5LD2-VM SE

ASUS P5LD2-VM SE 1-31-3

1-31-3

1-3

IntelIntel

Intel

®®

945G chipset945G chipset

945G chipset

The Intel

945G graphics memory controller hub (GMCH) and the ICH7 I/O

controller hub provide the vital interfaces for the motherboard. The GMCH

features the Intel

Graphics Media Accelerator 950, an integrated graphics

engine for enhanced 3D, 2D, and video capabilities. The GMCH provides the

interface for a processor in the 775-land package with 1066/800/533

MHz front side bus (FSB), dual channel DDR2 at speeds of up to 667 MHz,

and PCI Express x16 graphics card.

The Intel

ICH7 Southbridge represents the seventh generation I/O

controller hub that provides the interface for PCI Express and 8-channel

high definition audio.

DDR2 memory supportDDR2 memory support

DDR2 memory support

The motherboard supports DDR2 memory which features data transfer rates

of 667 MHz (FSB 800) or 533 MHz (FSB 1066/800) to meet the higher

bandwidth requirements of the latest 3D graphics, multimedia, and Internet

applications. The dual-channel DDR2 architecture doubles the bandwidth of

your system memory to boost system performance, eliminating bottlenecks

with peak bandwidths of up to 10.6 GB/s. See pages 1-16 to 1-18 for

details.

PCI Express™ interfacePCI Express™ interface

PCI Express™ interface

The motherboard fully supports PCI Express, the latest I/O interconnect

technology that speeds up the PCI bus. PCI Express features point-to-point

serial interconnections between devices and allows higher clockspeeds by

carrying data in packets. This high speed interface is software compatible with

existing PCI specifications. See page 1-21 for details.

64-bit CPU support64-bit CPU support

64-bit CPU support

The motherboard supports 64-bit processors that provides

high-performance computing and faster memory access required for

memory and data intensive applications.

IntelIntel

Intel

®®

Core™2 Processor ReadyCore™2 Processor Ready

Core™2 Processor Ready

This motherboard supports the latest Intel

Core™2 processor in the

LGA775 package. With the new Intel

Core™ microarchitecture technology

and 1066 / 800 MHz FSB, Intel

Core™2 processor is one of the most

powerful and energy efficient CPU in the world.

1-41-4

1-4 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

8-channel high definition audio8-channel high definition audio

8-channel high definition audio

The onboard Realtek

ALC882 8-channel high-definition audio CODEC

provides 192 KHz/ 24-bit audio output, jack-sensing and restasking

functions. With the 8-channel audio ports and S/PDIF interfaces, you can

connect your computer to home theater decoders to produce crystal-clear

digital audio.

S/PDIF digital sound readyS/PDIF digital sound ready

S/PDIF digital sound ready

The motherboard supports the S/PDIF Out function through the S/PDIF

interfaces at midboard. The S/PDIF technology turns your computer into a

high-end entertainment system with digital connectivity to powerful audio and

speaker systems. See page 1-28 for details.

Temperature, fan, and voltage monitoringTemperature, fan, and voltage monitoring

Temperature, fan, and voltage monitoring

The CPU temperature is monitored by the ASIC (integrated in the Winbond

Super I/O) to prevent overheating and damage. The system fan rotations

per minute (RPM) is monitored for timely failure detection. The ASIC

monitors the voltage levels to ensure stable supply of current for critical

components. See pages 2-32 and 2-33 for details.

AI OverclockingAI Overclocking

AI Overclocking

This feature allows convenient overclocking up to 30 percent (depending

on the installed CPU and DRAM) to enhance system performance while still

maintaining system stability. See section “2.4.1 JumperFree Configuration”

to set the BIOS items for overclocking.

Serial ATA technologySerial ATA technology

Serial ATA technology

The motherboard supports the Serial ATA technology through the Serial ATA

interfaces and the Intel

ICH7 chipset. The SATA specification allows for

thinner, more flexible cables with lower pin count, reduced voltage

requirement, and up to 300 MB/s data transfer rate.

ASUS P5LD2-VM SEASUS P5LD2-VM SE

ASUS P5LD2-VM SE 1-51-5

1-51-5

1-5

1.3.21.3.2

1.3.2 Innovative ASUS featuresInnovative ASUS features

Innovative ASUS featuresInnovative ASUS features

Innovative ASUS features

CrashFree BIOS 2CrashFree BIOS 2

CrashFree BIOS 2

This feature allows you to restore the original BIOS data from the support CD

in case when the BIOS codes and data are corrupted. This protection

eliminates the need to buy a replacement ROM chip. See details on page 2-6.

ASUS MyLogo™ASUS MyLogo™

ASUS MyLogo™

ASUS MyLogo™ personalize and add style to your system with

customizable boot logos. See page 2-35.

ASUS EZ Flash BIOSASUS EZ Flash BIOS

ASUS EZ Flash BIOS

With the ASUS EZ Flash, you can easily update the system BIOS even

before loading the operating system. No need to use a DOS-based utility or

boot from a floppy disk. See page 2-3 for details.

C.P.R. (CPU Parameter Recall)C.P.R. (CPU Parameter Recall)

C.P.R. (CPU Parameter Recall)

The C.P.R. feature of the motherboard BIOS allows automatic re-setting to

the BIOS default settings in case the system hangs due to overclocking.

When the system hangs due to overclocking, C.P.R. eliminates the need to

open the system chassis and clear the RTC data. Simply shut down and

reboot the system, and the BIOS automatically restores the CPU default

setting for each parameter.

1-61-6

1-6 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

Onboard LEDOnboard LED

Onboard LED

The motherboard comes with a standby power LED that lights up to

indicate that the system is ON, in sleep mode, or in soft-off mode.

This is a reminder that you should shut down the system and unplug

the power cable before removing or plugging in any motherboard

component. The illustration below shows the location of the onboard

LED.

1.4 Before you proceed

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or to

a metal object, such as the power supply case, before handling

components to avoid damaging them due to static electricity

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensure

that the ATX power supply is switched off or thethat the ATX power supply is switched off or the

that the ATX power supply is switched off or the

power cord is detached from the power supply.power cord is detached from the power supply.

power cord is detached from the power supply. Failure

to do so may cause severe damage to the motherboard, peripherals,

and/or components.

P5LD2-VM SE

P5LD2-VM SE Onboard LED

SB_PWR

Standby

Power

OFF

Powere

Off

ASUS P5LD2-VM SEASUS P5LD2-VM SE

ASUS P5LD2-VM SE 1-71-7

1-71-7

1-7

1.5 Motherboard overview

Before you install the motherboard, study the configuration of your chassis

to ensure that the motherboard fits into it.

Make sure to unplug the power cord before installing or removing the

motherboard. Failure to do so can cause you physical injury and damage

motherboard components.

Do not overtighten the screws! Doing so can damage the motherboard.

1.5.11.5.1

1.5.1 Placement directionPlacement direction

Placement directionPlacement direction

Placement direction

When installing the motherboard, make sure that you place it into the

chassis in the correct orientation. The edge with external ports goes to the

rear part of the chassis as indicated in the image below.

1.5.21.5.2

1.5.2 Screw holesScrew holes

Screw holesScrew holes

Screw holes

Place eight (8) screws into the holes indicated by circles to secure the

motherboard to the chassis.

Place this side towardsPlace this side towards

Place this side towards

the rear of the chassisthe rear of the chassis

the rear of the chassis

P5LD2-VM SE

1-81-8

1-8 Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.5.31.5.3

1.5.3 Motherboard layoutMotherboard layout

Motherboard layoutMotherboard layout

Motherboard layout

Below:

Center/Subwoofer

Center:

Side Speaker Out

Top:Rear Speaker Out

CR2032 3V

Lithium Cell

CMOS Power

Super

I/O

Intel FWH

4Mb

ATX12V

FLOPPY

AAFP

DDR DIMM_A2 (64 bit,240-pin module)

SB_PWR

F_PANEL

CHASSIS

USB78

USB56

CLRTC

PCI1

Intel

GMCH

945G

Intel

ICH7

DDR DIMM_B2 (64 bit,240-pin module)

CHA_FAN

CPU_FAN

PRI_IDE

EATXPWR

PCI2

SPDIF_OUT

Intel

Gigabit LAN

LGA775

PS/2KBMS

T: Mouse

B: Keyboard

Below:Mic In

Center:Line Out

Top:Line In

F_USB12

LAN_USB34

PCIEX1_1

PCIEX16

COM1

PARALLEL PORT

VGA1

PLED

P5LD2-VM SE

SATA1 SATA2

SATA4SATA3

BUZZ

SPEAKER

Other manuals for P5LD2-VM SE

Table of contents

Other Asus Motherboard manuals

Popular Motherboard manuals by other brands

IBM

IBM Mother Board 486F39X user manual

Rioworks

Rioworks PURCA user guide

Renesas

Renesas ZL2106EVAL1Z user manual

ISSI

ISSI IS31SE5104 quick start guide

ASROCK

ASROCK K7VM3 user manual

Biostar

Biostar NF61S-M2 TE Setup manual

Lumel

Lumel PD15 user manual

OLIMEX

OLIMEX MOD-MAG user manual

ECS

ECS H61H-G11 manual

MPS

MPS EVKT6515 user guide

GIGA-BYTE TECHNOLOGY

GIGA-BYTE TECHNOLOGY GA-AX370-Gaming K7 user manual

Lattice Semiconductor

Lattice Semiconductor ispMACH 4256ZE user guide

Nisshinbo Micro Devices

Nisshinbo Micro Devices NJR4652F2S1EV instruction manual

Analog Devices

Analog Devices EVAL-ADAQ23875FMCZ user guide

ASROCK

ASROCK 939NF4G-VSTA installation guide

ASROCK

ASROCK SBC-230-WT user manual

Aaeon

Aaeon PCM-8152 3rd Generation installation instructions

Asus P5LD2-VM SE User manual

Popular Motherboard manuals by other brands