ATake Digital Technology ShenZhen Co., Ltd.
Wireless Optical Mouse User Manual (Rechargeable)
ATake Co., Ltd. ♦7F., No. 123, Li-de Street, Jhonghe City, Taipei Country 235, Taiwan ♦WWW.ATAKE.COM
- 4 -
4. Sleep Mode
The mouse will switch to power saving mode after 3 seconds while working; and powered off
automatically in 8 minutes to extend battery life. The mouse will be activated again with one mouse click.
Note on handling batteries
zKeep batteries out of children’s reach.
zDo not mix old and new batteries or use different types of battery.
zReplace old or weak batteries promptly.
zAlways use rechargeable batteries only. The charge unit will not charge the mouse with alkaline
batteries and alkaline batteries can cause damage to the mouse.
zThis device needs two AAA 1.2V 600mA NIMH Re-chargeable batteries.
zDispose of and recycle your old batteries in accordance with local regulations.
zThe equipment is to be supplied from an identified USB port complying with the requirements of
Limited Power Source
Operating Hints
For optimal performance and RF reception:
zTurn off your computer’s power management feature before charging the mouse so that your computer
doesn’t enter sleep mode, which temporarily halts the charging process.
zPlace the receiver at least 8 inches (20 cm) away from all electrical devices, such as your monitor,
speakers or external storage devices.
zIf necessary, use the three-inch extension cable to keep the receiver away from the computer. Plug the
receiver into the extension cable, and the extension cable to the computer.
zAvoid using the mouse on a metal surface. Metals, such as iron, aluminum or copper, shield the radio
frequency transmission and may slow down the mouse’s response time or cause the mouse to fail
temporarily.
zThe mouse will enter a suspend mode at the same time your computer does. To activate the mouse,
press any button.
zIf your computer has a metal case that contains aluminum or magnesium, use the mouse to the side.
The display panel may interfere with the radio frequency signal if you use the mouse directly in front of
the computer.
zNever use the mouse on a glass or mirrored surface as these surfaces will cause the mouse to fail
temporarily.
zTo maximize battery life, use the mouse on a white, or light colored surface. Dark surfaces cause the
mouse’s light emitter diode (LED) light to glow brighter, which causes the battery to discharge more
rapidly.
Warranty
We warrant that product from its authorized distributor will meet the applicable product specifications and be
free from all defects in design, assembly, material and workmanship. Please contact ATake retailers, or visit
our website for more information about the product.
