AT&T CL80115 User manual

User’s manual
CL80115
DECT 6.0 expansion handset
for use with AT&T models
CL82115/CL82215/CL82315/
CL82415/CL82465/CL82515/
CL83215/CL83315/CL83365/
CL83415/CL83465/CL83565/
CL84115/CL84215/CL84265/
CL84365

Congratulations
on your purchase of this AT&T product. Before using this AT&T
product, please read the Important safety information section on
pages 23-25 of this manual. For complete instructions, please
refer to the manual provided with your CL82115/CL82215/CL82315/
CL82415/CL82465/CL82515/CL83215/CL83315/CL83365/CL83415/
CL83465/CL83565/CL84115/CL84215/CL84265/CL84365 telephone.
You can also visit our website at www.telephones.att.com or
call 1 [phone]. In Canada, dial 1 [phone].
This telephone meets the California Energy Commission regulations
for energy consumption. Your telephone is set up to comply with the
energy-conserving standards right out of the box. No further action is
necessary.
Model number: CL80115
Type: DECT 6.0 expansion handset
Serial number:
Purchase date:
Placeof purchase:
Both the model and serial numbers of your AT&T product can be
found on the bottom of the telephone base.
Save your sales receipt and original packaging in case it is necessary
to return your telephone for warranty service.
© 2015-2017 Advanced American Telephones. All Rights Reserved. AT&T and
the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219. Printed in China.
The ENERGY STAR® program (www.energystar.gov) recognizes and
encourages the use of products that save energy and help protect
our environment. We are proud to supply this product with an
ENERGY STAR® qualied power adapter meeting the latest energy
eciency guidelines.
T
Compatible with
Hearing Aid T-Coil
TIA-1083
Telephones identied with this logo have reduced noise and
interference when used with most T-coil equipped hearing aids and
cochlear implants. The TIA-1083 Compliant Logo is a trademark of
the Telecommunications Industry Association. Used under license.

Your telephone package contains the following items. Save your
sales receipt and original packaging in the event warranty service is
necessary.
Battery for
cordless handset
Cordless handset Charger for cordless
handset with power
adapter installed
Battery
compartment cover
User’s manual
User’s manual
CL80115
DECT 6.0 expansion handset
for use with AT&T models
CL82115/CL82215/CL82315/
CL82415/CL82465/CL82515/
CL83215/CL83315/CL83365/
CL83415/CL83465/CL83565/
CL84115/CL84215/CL84265/
CL84365
Parts checklist

User’s manual
CL80115
DECT 6.0 expansion handset
for use with AT&T models
CL82115/CL82215/CL82315/CL82415/CL82465/
CL82515/CL83215/CL83315/CL83365/CL83415/
CL83465/CL83565/CL84115/CL84215/CL84265/
CL84365
Table of contents
Getting started
Installation ............................................................................................................................. 1
Quick reference guide....................................................................................................2
Charger installation.........................................................................................................5
Battery installation and charging ..........................................................................6
Registration and deregistration
Adding and registering handsets...........................................................................9
Deregistering handsets ..............................................................................................12
Appendix
Troubleshooting.............................................................................................................. 14
Maintenance......................................................................................................................22
Important safety information............................................................................... 23
Safety information.................................................................................................... 23
Especially about cordless telephones..........................................................24
Precautions for users of implanted cardiac pacemakers ..............25
Pacemaker patients ................................................................................................. 25
ECO mode ....................................................................................................................... 25
Especially about telephone answering systems...................................25
For C-UL compliance....................................................................................................26
Mesures de sécurité importantes ..................................................................26
FCC Part 68 and ACTA.................................................................................................30
FCC Part 15.......................................................................................................................... 32
California Energy Commission battery charging testing instructions.....33
Limited warranty ............................................................................................................34
Technical specications............................................................................................. 37
DECT 6.0 digital technology................................................................................ 37
Telephone operating range................................................................................ 37
Redening long range coverage and clarity............................................ 37
HD audio........................................................................................................................... 37
Simulated full-duplex handset speakerphone ...................................... 37

Getting started
1
See pages 6-8
for easy instructions.
You must install and
charge the battery before
using the telephone. STOP!
Installation
Your product may be shipped with a protective sticker covering the
handset display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 [phone].
In Canada, dial 1 [phone].
Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other
cordless telephones.
Excessive heat sources.
Noise sources such as a window with trac outside, motors,
microwave ovens, refrigerators, or uorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing
machine or workbench.
•
•
•
•
•
•
•

2
Getting started
Quick reference guide
CHARGE light
On when the handset is charging in the
telephone base or charger.
DIR/volume
Press to scroll up while in menus.
Press to increase the listening volume.
Press to show directory entries when the
handset is not in use.
When entering names or numbers in the
directory, press to move the cursor to the
right.
•
•
•
•
/SPEAKER
Press to turn on the handset speakerphone,
press again to resume normal handset use.
TONE /a>A
Press to switch to tone dialing temporarily
during a call if you have pulse service.
While entering names, press to change the
next letter to upper or lower case.
•
•
PHONE/FLASH
Press to make or answer a call.
During a call, press to answer an incoming
call when you receive a call waiting alert.
•
•
1
While reviewing a caller ID log entry, press
repeatedly to add or remove 1 in front of
the telephone number before dialing or
saving it in the directory.
Press and hold to set or dial your voicemail
number.
•
•
REDIAL/PAUSE
Press repeatedly to view the last ten
numbers dialed.
While entering numbers, press and hold to
insert a dialing pause.
•
•

Getting started
3
Quick reference guide
CID/volume
Press to scroll down while in menus.
Press to decrease the listening volume.
Press to show the caller ID log when the
handset is not in use.
While entering names or numbers in the
directory, press to move the cursor to
the le.
•
•
•
•
MENU/SELECT
Press to display the menu.
Once in the menu, press to select an item
or save an entry or setting.
•
•
OFF/CANCEL
During a call, press to hang up.
While using menus, press to cancel an
operation, back up to the previous menu,
or exit the menu display; or press and hold
to exit to idle mode.
Press and hold while the handset is not in
use to erase the missed call indicator.
•
•
•
QUIET#
Press and hold to set and turn on the
quiet mode, or turn it o.
When reviewing a caller ID log entry, press
repeatedly to view other dialing options.
•
•
EQ
During an outside call, intercom call, message
or announcement playback, press to change
the audio quality to best suit your hearing.
MUTE/DELETE
During a call, press to mute the microphone.
While predialing, press to erase digits.
While reviewing the redial list, directory,
speed dial list or caller ID log, press to
delete an individual entry.
•
•
•

4
Getting started
Quick reference guide
For complete instructions, refer to the manual provided with your
CL82115/CL82215/CL82315/CL82415/CL82465/CL82515/CL83215/
CL83315/CL83365/CL83415/CL83465/CL83565/CL84115/CL84215/
CL84265/CL84365 telephone system. If you are unable to nd your
manual, go to www.telephones.att.com/manuals to read
and/or download the manual.
Main menu
Play messages
Answering sys
Directory
Caller ID log
Call block
Intercom
Ringers
Set date/time
Settings
Web address
Using menus:
Press MENU/SELECT to show
the menu.
Press CID or DIR to scroll
through menu items.
Press MENU/SELECT to conrm
or save changes to a highlighted
menu item.
Press OFF/CANCEL to cancel an
operation, back up to the previous
menu, or exit the menu display.
•
•
•
•
Play messages
ECO
PUSH TO TALK
Press to initiate a one-to-one or one-to-group broadcast.
Press and hold to broadcast to a group of system devices.
•
•
Handset side view
Main menu
The >symbol highlights
a menu item.
>Play messages
Answering sys
Only on CL82115/
CL82215/CL82315/
CL82415/CL82465/
CL82515 telephone
system

Getting started
5
IMPORTANT INFORMATION
1. Use only the power adapter supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com or
call 1 [phone]. In Canada, dial 1 [phone].
2. The power adapter is intended to be correctly oriented in a vertical or oor
mount position. The prongs are not designed to hold the plug in place if it is
plugged into a ceiling, under-the-table or cabinet outlet.
Plug the power adapter into an
electrical outlet not controlled by
a wall switch.
Install the charger, as shown below.
Charger installation

6
Getting started
Install the battery, as shown on page 7. Once you have installed
the battery, the screen indicates the battery status (see the
following table). If necessary, place the handset in the telephone
base or charger to charge the battery. For best performance, keep
the handset in the telephone base or charger when not in use. The
battery is fully charged aer 10 hours of continuous charging. See
the table on page 37 for battery operating times.
If the screen shows Place in charger and ashes, you need to
charge the handset without interruption for at least 30 minutes to
give the handset enough charge to use the telephone for a short
time. The following table summarizes the battery charge indicators
and actions to take.
Battery indicators Battery status Action
The screen is blank, or
shows Put in charger
and (ashing).
Battery has no or
very little charge. The
handset cannot be used.
Charge without interruption
(at least 30 minutes).
The screen shows
Low battery and
(ashing).
Battery has enough
charge to be used for a
short time.
Charge without interruption
(at least 30 minutes).
The screen shows
HANDSET X.
Battery is charged. To keep the battery charged,
place it in the telephone
base or charger when not
in use.
NOTE: If you are on a phone call in low battery mode, you hear four short
beeps every minute.
Battery installation and charging