ATD Tools ATD-5038 User manual

ATD-5038
Drum Level Indicator
Owner’s Manual
SPECIFICATIONS:
s!LLOWSEASYCHECKOFFLUIDLEVELINGALLONDRUM
s)NDICATORFACECANBEREVERSEDTOREADINGALLONSORLITERS
RECOMMENDED USE:
/ILDIESELFUELWATERANDWATERBASEDFLUIDSANTIFREEZEETC
NOTE:4HISISNOTAPRECISIONMEASURINGDEVICEANDSHOULDBEUSEDONLYTOGIVEANAPPROXIMATELEVELOFLIQUIDINTHEDRUM
Read in liters and gallons
Scale graduated in gallonsScale graduated in liters
Instructions to ip scale between liters and gallons
Flip the scale to switch between gallons/ liters.
Align marking with the diagonal of the body.
Place the needle back on the center pin, ensure
that at the top most level the oat and the needle
is on the max. marking. Now close the lid.
Open the cover of the indicator with the help
of the notches provided on the sides
Carefully pull out the needle
Fits the smaller
3/4” hole on
drums, leaving
the 2” hole free
for installing pumps
Made in India to ATD Tools, Inc. Specications
Visit us at www.atdtools.com
ATD5038_rev_0218