ATEN KE69 User manual

2. Remove the bottom and side screw from each KE6900 unit.
KE69 Dual Rack Mount Kit - 2X-021G
Installation:
Package Contents:
1. Remove four screws from the KE6900 units and then use the same screws to secure the units
together with the link bracket.
This dual rack mounting kit installs two KE6900 units side
by side in 1U of server rack space. 1 x Link Bracket
1 x Right Mounting Bracket
1 x Left Mounting Bracket
4 x Phillips Head Hex Screws
4 x Flat Screws
Link Bracket
Remove Screws
Remove Screws
User Instructions

KE69 Dual Rack Mount Kit - 2X-021G
4. Screw the mounting brackets to the rack.
3. Use the screws from step 2 to install the left and right mounting brackets.
Right
Mounting
Bracket
Left
Mounting
Bracket
Phillips Head
Hex Screw
Phillips Head
Hex Screw
User Instructions