ATEQ ADSE 743 User manual

ADSE 743
USER MANUAL
REFERENCE V06-D2-0194-F / FEBRUARY 2023
INTERACTIVE NAVIGATION
ateq-aviation.com

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 2/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
EXHAUSTIVE TABLE OF CONTENT
Revision of the Manual...................................................................................................... 4
Contact ............................................................................................................................. 5
Safety Advisory................................................................................................................. 6
PRESENTATION 7
General..................................................................................................................................................................... 7
Applications........................................................................................................................................................... 8
Characteristics ..................................................................................................................................................... 9
Units, Range and Precision from 10°C to 40°C ................................................................................... 10
Static pressure - Ps - Standard ..................................................................................................................... 10
Total and differential pressures - Pt - ΔP- Standard.............................................................................11
Rates of intrinsic leak........................................................................................................................................11
Domain ight option from 10°C to 40°C .......................................................................................... 12
Pt options............................................................................................................................................................. 12
Total and differential pressures - Pt - Low speed option 350 kts ................................................. 12
Technical description...................................................................................................................................... 13
Electro-pneumatic Unit .................................................................................................................................. 13
Front Panel..................................................................................................................................................... 13
Electro-pneumatic block.......................................................................................................................... 13
Pressure transducers................................................................................................................................. 13
Servo-valves...................................................................................................................................................14
Computer ........................................................................................................................................................14
Safety system.................................................................................................................................................14
Remote Control Unit...................................................................................................................................14
Software ............................................................................................................................................................... 15
Language......................................................................................................................................................... 15
Pressure control .......................................................................................................................................... 15
Automatic Test programs......................................................................................................................... 15
Flight Domain................................................................................................................................................ 15
Self test............................................................................................................................................................ 15
USER ACCESS 16
ADSE 743 RCU front panel........................................................................................................................... 16
ADSE 743 EPU front panel ........................................................................................................................... 17
GETTING STARTED 18
Initial Procedures ............................................................................................................................................. 18
ADSE 743 alternative power feeding........................................................................................................ 18
ADSE 743 on direct current .......................................................................................................................... 18
Remote control link .......................................................................................................................................... 18
Pneumatic link .................................................................................................................................................... 18
Preparing for use ............................................................................................................................................... 18
Powering up......................................................................................................................................................... 18
Wi-Fi connection................................................................................................................................................19
Interface software .............................................................................................................................................19
Shutting off ...........................................................................................................................................................19
OPERATOR INTERFACE 20
Starting software.............................................................................................................................................. 20
Connection established.................................................................................................................................. 21
Connection not established.......................................................................................................................... 21
Access to the ight domains ........................................................................................................................ 22
Select a ight domain....................................................................................................................................... 22
Creating a ight domain.................................................................................................................................. 24
Editing, Renaming and deleting a ight domain .................................................................................... 25
.../...

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 3/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
EXHAUSTIVE TABLE OF CONTENT
Access to the Measure/Manual Mode ................................................................................................... 26
Changing the unit on the Ps and Pt channels ......................................................................................... 27
Activating a channel ........................................................................................................................................ 28
Generating on the Ps or Pt channel ........................................................................................................... 28
Executing the instructions ............................................................................................................................ 29
Outow indicators............................................................................................................................................ 30
Leak test................................................................................................................................................................ 31
Return to the ground........................................................................................................................................ 32
Displaying the current ight domain ......................................................................................................... 33
Automatic program mode............................................................................................................................. 34
Writing a new program ................................................................................................................................... 35
Editing, Renaming and deleting a program le ...................................................................................... 38
Executing a program ........................................................................................................................................ 39
Operating Mode .......................................................................................................................................... 46
File format for the data recorded by the semi-automatic program ........................................ 47
File Manager ....................................................................................................................................................... 48
General Information........................................................................................................................................ 49
Parameters .......................................................................................................................................................... 50
Password .............................................................................................................................................................. 54
Enter a password ............................................................................................................................................... 56
Ground function ................................................................................................................................................ 57
Languages ............................................................................................................................................................ 58
Help on line...........................................................................................................................................................59
Exiting the software.........................................................................................................................................59
Keyboard conguration................................................................................................................................. 60
Digital keyboard................................................................................................................................................. 60
Alpha-Numeric Keyboard.............................................................................................................................. 60
Manual grounding .............................................................................................................................................61
MAINTENANCE 62
Low Level Maintenance ................................................................................................................................. 62
Autotest Function ............................................................................................................................................ 62
Maintenance Plan............................................................................................................................................. 67
Error and warning list ..................................................................................................................................... 68
OPTIONS 70
1/ RCU link-serial Option.............................................................................................................................. 70
2/ Suction Pump Option ............................................................................................................................... 71
3/ Internal Battery Pack Option ............................................................................................................... 72
4/ Two selectable Outputs Option............................................................................................................ 73
5/ DC Power Option .........................................................................................................................................74
6/ EPR Option..................................................................................................................................................... 75
7/ Cabin Pressure Option.............................................................................................................................. 78
8/ Outow Valve Option ............................................................................................................................... 80
SAFETY INFORMATION 82
Operating environment................................................................................................................................. 82
Safety for Lithium Polymer battery use ................................................................................................. 82
Important instructions (for service personnel only) ........................................................................ 83
Recycling .............................................................................................................................................................. 83

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 4/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
REVISION OF THE MANUAL
We continuously work on improving our products. This is why the information contained
in this manual, the device and the technical specications may be modied without prior
notication.
OBJECT DATE EDITION REFERENCE
Creation
Revision
Revision
Revision
Revision
Revision
November 2017
October 2018
November 2018
July 2020
February 2021
February 2023
01
02
03
04
05
06
D2-0194-A
D2-0194-B
D2-0194-C
D2-0194-D
D2-0194-E
D2-0194-F
ATEQ Aviation Factories:
ATEQ - 15, rue des Dames, Z.I. - 78340 Les Clayes-Sous-Bois - France
Control Technology China, LTD - 98 Jian Peng Lu - Shanghai - China
Copyright © 2023 by ATEQ Inc. All rights reserved. The content of this manual may not be
reproduced in any form by any means, in part or in whole, without the prior written permis-
sion of ATEQ. Any reproduction of this document in any form whatsoever will be subject to
prosecution.
Pictures and gures in this manual are non-contractual.

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 5/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
CONTACT
With presence in 40 countries, ATEQ teams are knowledgable, professional and ready to
provide efcient service and support to customers worldwide.
A single procedure to get in touch with your ATEQ representative:
ateq-aviation.com
SUPPORT & SERVICES
Contact ATEQ Aviation Support & Services for calibration, follow-up, revision, trouble-
shooting and maintenance in real-time. Track the progress of your instrument’s service.
View quotation statuses and keep in contact with your local representative.
For urgent enquiries, please provide your phone number and wherever you are located, a
highly training technician will call you back promptly.
“You may be assured that we will do our utmost to look after your needs”.
ATEQ Team.

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 6/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
SAFETY ADVISORY
If the device is supplied with 100 / 264 VAC, it is mandatory to connect it to the ground with
a good link to the ground, to protect against electric hazard or electrocution.
It is dangerous to change the status of the Outputs.
They can control power actuators or other equipment (mechanical, pneumatic, hydraulic,
electrical or other) which can cause serious personal injury and damage to surrounding
material.
Recommendations for the test environment
Keep the test area as clean as possible.
Recommendations for operators
ATEQ recommends that the operators who use the devices have training and a level
of qualication that correspond to the job to perform.
General Recommendations
- Read the user manual before using the device.
- All electrical connections to the device must be equipped with safety systems (fuses,
circuit breakers, etc.) adapted to the needs and in accordance with the applicable stan-
dards and rules.
- To avoid electromagnetic interference, electrical connections to the device must be
shorter than 2 meters.
- Power supply plug must be grounded.
- Disconnect the device from the mains before performing any maintenance work.
- Shut off the compressed air supply when working on the pneumatic assembly.
- Do not open a connected device.
- Avoid splashing water on the device.
ATEQ is at your disposal for any information concerning the use of the device under maxi-
mum safety conditions.
We draw your attention to the fact that ATEQ cannot be held responsible for any accident
related to a misuse of the measuring instrument, the workstation or non-compliance of
the installation with safety rules.
In addition, ATEQ declines any responsibility for the calibration or the tting of their
instruments that is not done by ATEQ.
ATEQ also declines any responsibility for any modication (program, mechanical or elec-
trical) of the device done without their written consent.
“We are at your disposal for any information concerning the use of the device under maxi-
mum safety conditions”.
ATEQ Team.

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 7/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
PRESENTATION
GENERAL
The purpose of this manual is to provide the user with the information required to imple-
ment and operate the ADSE 743 Pitot Static Tester.
Exhibit 1: General view of ADSE 743
The ADSE 743 pressure controller is housed in a very robust housing box, able to be moved
directly to the aircraft on the tarmac or in the hangar to proceed “in situ” to test the equip-
ment tted to the aircraft.

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 8/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
The two parts of ADSE 743
- The Electro Pneumatic Unit (EPU) includes the computer, the pressure measurement and
regulation devices, the safety systems as well as the pressure and vacuum pumps neces-
sary for independent operation in generation mode,
- The Remote Control Unit (RCU), located in the cover of the housing box, includes the
Man Machine Interface. It consists of a Tablet PC tted with a watertight touch sensi-
tive plate displaying the static (Ps) and total (Pt) pressure parameters (functions, mea-
surement units, commands, rate of change, nominal values, program number, ight limit
number).
RCU and EPU are connected through Wi-Fi. (In case of problem with the Wi-Fi, a cable can
be connected between RCU and EPU).
The ergonomics of the ADSE 743 allows:
- Excellent readability of the information,
- Easy programming of the conguration (interactive menus, with explanations and indi-
cation of potential handling errors),
- Direct calibration by the user.
APPLICATIONS
The ADSE 743 pressure generator/controller has been specially designed to simplify pres-
sure tests on equipment tted on the aircraft (altimeter, air speed indicator, rate of climb
indicator, air data computers ...) in the workshop, in the hangar or directly on the tarmac.
The computer manages the safety systems, the measurement and regulation devices from
the remote control unit with following operating functions:
1/ In “Measure” or “Manual” mode, independently or simultaneously on both static (Ps)
and total (Pt) pressure channels:
- Measurement or generation of static (Ps) pressures (altitude),
- Measurement or generation of total (Pt) pressures (air speed /MACH number),
- Chronometric measurement of leak rate.
2/ In “Program” mode, independently or simultaneously on both static (Ps) and total (Pt)
pressure channels:
- “Flight domains” writing,
- “Automatic test” programs writing,
- Execution of the written programs. In this mode, the operator can choose to enter at
each program step the actual data read on the equipment under test, or to let the pro-
gram run and to note manually the values read on the equipment under test.
3/ Security:
- Full time survey of all the ight domain limits parameters,
- Re-connection of the pressure circuits to the atmospheric pressure through manual ow
adjustable valves in case of power supply network cut-off,
- Self test of all the ADSE 743 internal functions each time the equipment gets switched on.

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 9/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
4/ Baro-setting:
The baro-setting (Ref) adjustment is performed by the operator himself and remains dis-
played permanently.
5/ Altitude difference (between the bench position and the equipment under test):
The operator can introduce in the measurement process the altitude difference between
the bench on the ground and the equipment tted in the aircraft cockpit.
CHARACTERISTICS
Power supply 90 to 264 VAC from 50 to 400 Hz
And 19 to 32 VDC (optional)
Normal operating temperature range -5°C to + 50°C (23°F to 122°F)
(Extanded Range on-demand)
Storage temperature -20°C to + 60°C (-4°F to 140°F)
(Extanded Range on-demand)
Overall dimensions of the equipment Length: 525 mm / 20.7 in.
Depth: 216 mm / 8.4 in.
(400 mm / 16 inch with bag)
Height: 435 mm / 17.2 in.
Outside dimensions
of the remote control unit
Width: 240 mm / 9.5 in.
Height: 142 mm / 5.6 in.
Depth: 14.5 mm / 0.6 in.
Total weight (without battery, cables & tubes) 18 kg / 40 lbs
Weight of the RCU 0.6 kg / 1.3 lbs
Power consumption Less than 120 VA ~

ADSE 743 / USER MANUAL / Reference V06-D2-0194-F / February 2023 10/84
Exhaustive Table of Content
Revision of the Manual
Contact
Safety Advisory
PRESENTATION
General
Applications
Characteristics
Units, Range and Precision
Domain ight Options
Technical description
USER ACCESS
ADSE 743 RCU front panel
ADSE 743 EPU front panel
GETTING STARTED
Initial Procedures
OPERATOR INTERFACE
Starting software
Access to the ight domains
Measure/Manual Mode
Automatic program mode
File Manager
General Information
Help on line
Exiting the software
Keyboard conguration
Manual grounding
MAINTENANCE
Low Level Maintenance
Autotest Function
Maintenance Plan
Error and warning list
OPTIONS
1/ RCU link-serial Option
2/ Suction Pump Option
3/ Internal Battery Pack Option
4/ Two selectable Outputs Option
5/ DC Power Option
6/ EPR Option
7/ Cabin Pressure Option
8/ Outow Valve Option
SAFETY INFORMATION
UNITS, RANGE AND PRECISION FROM 10°C TO 40°C
All of the folowing performances have been validated from volumes 0 to 2,000 cc under
standard conditions.
Performance can be modied according to:
– the volume connected to the device,
– internal pumps wear,
– environmental condions (atmospheric pressure and temperatures).
Static pressure - Ps - Standard
CHANNEL UNIT RANGE PRECISION RESOLUTION
Ps hPa 72 to 1,100 hPa (1) ± 0.13 hPa 0.01 hPa
Ps InHg 32F 2.1 to 32.5 inHg (1) ± 0.003 inHg 0.001 inHg
Altitude
Zp
ft -2,300 to 60,000 ft
± 3 ft at 0 ft
± 8 ft at 30,000 ft
± 32 ft at 60,000 ft
1 ft
m-700 to 18,000 m
± 1 m at 0 m
± 3 m at 10,000 m
± 10 m at 18,000 m
1 m
ΔZp / Δt
(VZ)
ft/min 100 to 6,000 ft/min ± 10 ft or ± 1 % (2) 5 ft/min
m/min 31 to 1,800 m/min ± 3 m or ± 1 % (2) 1 m/min
(1): Measure only (see ft unit for generation and calibration).
(2): on an integration time greater than 3 seconds, these performances are valid on a volume of 0 to 2000 cc.