Atlantic Technology FS-BTWS582 User manual

343 Vanderbilt Avenue Norwood, MA 02062
Telephone: [phone] Fax: [phone]
FS-BTWS582 WIRELESS HEADPHONES USER GUIDE

Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other .
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power- supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Grounding or Polarization–This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician
to replace your obsolete outlet. Do not defeat the safety purpose of the
polarized plug.
Alternate Warnings–This product is equipped with a three-wire grounding-
type plug, a plug having a third (grounding) pin. This plug will only fit into
a grounding-type power outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
16. Ventilation–Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided
or the manufacturer’s instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the disconnect
device, the disconnect device shall remain readily operable.
18. CLASS II apparatus with double insulation, and no protective earth
provided.
19. CAUTION: Danger of explosion if the remote control battery is
incorrectly replaced. Replace only with the same or equivalent type.
20. WARNING: The remote control battery (battery or batteries or battery
pack) shall not be exposed to excessive heat such as sunshine, fire or the
like.
21. No naked flame sources, such as lighted candles, should be placed on
the apparatus.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE
THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Important Safety Instructions
1/18

FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interfer- ence
that may cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
inerference to radio communications.
However, there is no guarantee that interference will not occur in a particu- lar
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equip-
ment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/TV technician for help. Caution:
To comply with the limits for an FCC Class B comput
ing device, always use any shielded signal cord supplied with this unit.
The Federal Communications Commission warns that changes or modifica-
tions of the unit not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment.
Radio Frequency Interference Statement
Warning:
This is a Class B product. In a domestic environment, this product may cause
radio interference in which case the user may be required to take adequate
measures.
European Union Information on Disposal for Users of Waste
Electrical & Electronic Equipment (private households)
This symbol on the product(s) and / or accompanying documents means
that used electrical and electronic products should not be mixed with
general household waste. For proper treatment, recovery and recycling,
please take this product(s) to designated collection points where it will be
accepted free of charge.
Alternatively, in some countries you may be able to return your products
to your local retailer upon purchase of an equivalent new product.
Disposing of this product correctly will help save valuable resources and
prevent any potential negative effects on human health and the environ-
ment, which could otherwise arise from inappropriate waste handling.
Please contact your local authority for further details of your nearest
desig- nated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accor-
dance with you national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact
your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard
this product please contact your local authorities or dealer and ask for the
cor- rect method of disposal.
Important Safety Instructions
Qualcomm aptX is a product of Qualcomm Technologies International,
Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in
the United States and other countries, used with permission. aptX is a
trademark of Qualcomm Technologies International, Ltd., registered in
the United States and other countries, used with permission.
2/18

Introduction
3/11
1. Skaa Indicator LED(Multicolor),
When you turn to SKAA mode, the SKAA LED will be on.
See Page 7 For Detail
2. Skaa Bond Button,
When you press once, it will search for the connection signal
that has been set.
When you press twice, it will search for the surrounding
connection signal.
See Page 7 For Detail
3. Volume Up Button
4. Volume Down Button

Introduction
12.
13. Skaa Bond Button, See Page 10-11 For Detail
14. Power Led Red: On, Not Light: Off
15. Bluetooth Led, See Page 8-9 For Detail
16. Relay Led, See Page 13-14 For Detail
17. Aux Led, See Page 12 For Detail
18. Skaa Indicator Led, See Page 11 For Detail
19. Power On/Off Button
20. Mute Button
21. Volume Up Button
22. Volume Down Button
23. Gear Button, See Page 7 For Detail
24. Skaa Bond Button, See Page 11 For Detail
25. Bluetooth Button, See Page 8-9 For Detail
5. Bluetooth Button
When the call comes in, press the Bluetooth Botton to pick
up the call. When you press the Bluetooth Botton again, the
call will hang up.
6. Bluetooth Indicator LED(blue)
When your phone hasn’t connected with the earphone,
Bluetooth Indicator LED will stay twinkle.
When your phone connected with the earphone, Bluetooth
Indicator LED will be on.
7. Power Button/Play/Stop/Next/Previous
When you press once, it will turn on or turn off the music
When you press twice, it will select next song
When you press three times, it will select previous song
8. SKAA and Bluetooth Switch
If you want to use the SKAA function, you should turn the
switch to SKAA
If you want to use the Bluetooth function, you should turn the
switch to Bluetooth
9. Stereo Jack
When the battery of the earphone dies, you can connect the
phone with STEREO JACK through audio cable.
See Page 5 For Detail
10. charge Jack(USB Type c)
You can charge the product by the charger with TYPE C Jack.
11. charge Indicator LED(Green/Red)
When the RED light twinkles, that means the battery will die
soon. You should charge the production.
When the GREEN light is on, that means the production is
charging. After the battery is full charged, the green light
wilL be off.
4/11

Connecting a Bluetooth Source
Turn switch of the SKAA and Bluetooth to the BT mode, the BTWS582
will turn to Bluetooth mode. When in Bluetooth mode, the Bluetooth
LED will be illuminated.
Enter pairing mode on the Bluetooth device you want to connect to the
FS-BTWS582 and select the FS-BTWS582 from the discoverable devices
list.This diagram represents the Bluetooth behavior of the FS-BTWS582
5/11
Connection by phone
When the battery of the BTWS582 dies, you can connect the phone with
earphone through audio cable. Then it works again.

Using your FS-BTWS582 as a SKAA receiver
The FS-BTWS582 can be used as anSKAA receiver when in SKAA mode. An
SKAA receiver receives wireless audio from any SKAA transmitter. For a
complete list of SKAA transmitters visit https://hop.atlantictechnology.com/
product/FS-BTWS582
Ensure your SKAA transmitter is powered, and that your host device is
playing audio. For example, if you are using a smart phone, make sure that
your SKAA transmitter is plugged into your smart phone and that music is
playing.
Turn switch of the SKAA and Bluetooth to the SKAA mode, the BTWS582
will turn to SKAA mode. The SKAA Indicator LED will illuminate once you
have entered SKAA mode. When in SKAA mode, your FS-BTWS582 should
automatically begin playing the audio received over SKAA through the
speakers you have connected.
One SKAA transmitter can serve up to four SKAA receivers.
SKAA
Transmitter
6/11
SKAA!
(Up to 50 m)

Using your FS-BTWS582 as a SKAA receiver
Bond Button
7/11
Indicator Bond Button

SKAA cmd
8/11
SKAA cmd is an optional App available for iPhone, iPad, iPod, Android, Mac and
PC. You can find it on our website www.skaa.com/tlc/ or in the iOS App store
and Google Play. SKAA cmd is great for getting the most out of your FS-252.
To use SKAA cmd, throw your FS-252 into SKAA mode, download the app,
insert a SKAA transmitter and check out all of the customizable features of
SKAA. SKAA cmd only works with seven specific SKAA transmitters: Izabella,
Diz, Ursula, Gemma, Akiko, Talisa and Cassandra. The FS-252 will not work
with SKAA cmd unless you are using one of the supported transmitters.

The test was performed according to
the following European standards:
Draft ETSI EN 301 489-1 V2.2.0(2017-03); Draft ETSI EN 301
489-17 V3.2.0 (2017-03); ETSI EN 301 893 V2.1.1 (2017-05);
ETSI EN 300 328 v2.1.1 (2016-11);
EN 62311:2008
Safety Comments
The appliance is only suitable for moderate climates.
The maximum ambient temperature during use of the appliance must not
exceed 40°C/105°F.
Do not drop the appliance or expose it to any other type of impact.
Do not place the appliance in an area exposed to heat, direct sunlight,
dampness, moisture, rain, vibration, shock, dust or sand.
Only use a dry brush or cloth to clean the appliance.
Note:!
Use this appliance in a temperature range between -20°C and 45°C (-4°F and
113°F).
Symbols Used
Indoor Use Only
Protection class II appliance (ONLY FOR CLASS II
EQUIPMENT)
Do not dispose of the appliance along with normal
waste. Recycle the appliance.
FS-BTWS582 Specifications
Product type
Impedance
Inputs
Sound Pressure
Level (SPL)
Power
Connector
Indicatorl
Dimensions
Weight
*
Enclosed，*moving*coil
32Ohm
SKAA*wireless*technology
BLUETOOTH IN*
LINE*IN*
Li-Li Bat
3.5mm stereo
LED
W145*H285*D215mm
3.6kg
9/11
98dB

Bond Button Icon
Before proceeding with reading the following frequently asked questions and answers, please
make sure that your SKAA devices are powered, in SKAA-mode (if applicable) and in range of one
another (~20 m).
1. When I power on my SKAA speaker, the Indicator is dim green and when I play
audio from my SKAA transmitter, no sound comes from the speaker.
Most likely your SKAA speaker is hunting for one of your favorite transmitters. Simply press the
Bond Button once, in order to switch to another favorite transmitter. If no other favorite
transmitters are saved on the Green List, pressing the Bond Button once will not have an effect.
In this case, double-click the Bond Button in order to put the speaker into Amber Mode. Amber
Mode will explore for new, unknown transmitters in the area that are currently playing audio. If
the issue persists, you can always factory reset the SKAA receiver by six-clicking the Bond
Button. The SKAA Indicator will flicker red for one second and the speaker will return to Amber
Mode. If six-clicking the Bond Button has no effect, see the next trouble-shooting item.
2. When I power on my SKAA speaker and attempt to play audio from a SKAA
transmitter, I hear no sound, the Indicator is dim green and no matter how many times
I click the Bond button, nothing changes.
In this case, your SKAA speaker is a Slave speaker in a Cluster of speakers. This means that this
speaker was probably sold with at least one other speaker, and one of these other speakers is the
Master speaker. The Master speaker is responsible for controlling all Slave speakers. A Slave
speaker will always follow the Master speaker. Some Slave speakers still contain a Bond Button in
order to mute the speaker (this can be accomplished by triple-clicking the Bond Button). Any
SKAA speaker with a Bond Button on it can be a stand-alone speaker, however it will have to be
"unclustered" See the SKAA Receiver User’s Guide for the unclustering procedure.
Trouble Shooting Guide
The purpose of this guide is to provide answers to frequently asked questions when using FS-252
products for the first time.
Note: SKAA provides a very simple, one-button, one-LED, interface. These two components are
called, and will be referred to as, the Bond Button and the SKAA Indicator.
At any time, when interacting with SKAA, the user may locate the Bond Button and rapidly click it
six times to reset SKAA to its factory settings. In some cases, it can prove useful to factory-reset
an SKAA receiver. If an SKAA transmitter is available and transmitting audio, the factory-reset
automatically Bonds to the transmitter and resets the volume.
10/11

Trouble Shooting Guide
3.What is the difference between Green Mode and Amber Mode and how do I use
them?
When you power on a SKAA speaker for the first time, it will be in Amber Mode. You can
identify a speaker in Amber Mode by the behavior of its SKAA Indicator (if the SKAA
Indicator is amber, the speaker is in Amber Mode). When in Amber Mode, the speaker
will explore for new, unknown transmitters in the area that are currently playing audio.
Once found, it will Bond to that transmitter, the SKAA Indicator will switch from dim
amber to bright amber and the speaker will start playing audio. The speaker is now
Bonded and in Amber Mode. Green Mode can be achieved after an SKAA speaker is
Bonded and in Amber mode. Once a speaker is Bonded and in Amber Mode, simply hold
down the Bond Button for three seconds. The SKAA Indicator will switch from bright
amber to bright green. Now, the next time you power down your SKAA speaker(s) and
transmitter(s) and power them back on again, the SKAA speaker(s) will be waiting for
the transmitter on the Green List. When the transmitter becomes available, it will
automatically Bond to it. SKAA speakers can store up to ten transmitters on a Green
List. To cycle through transmitters on a Green List, simply click the Bond Button once to
cycle to the next transmitter on the Green List.
4.How do I know which SKAA compatible receivers work with each other?
All devices running SKAA OS 2.1 and newer are designed to work together seamlessly. These
three lines should be single spaced, not double spaced.
contact us via：
[email protected] and we will help you.
11/11

343 Vanderbilt Avenue Norwood, MA 02062
Telephone: [phone] Fax: [phone]