Atlas Alti-2 User manual

D-90360
Atlas User Manual
Rev B
April 12, 2017
Warning: PARACHUTING IS A HAZARDOUS ACTIVITY THAT CAN RESULT IN INJURY
OR DEATH.
An altimeter is a device subject to malfunction, even when properly designed, built,
assembled, maintained, and used. Do not rely upon an altimeter for your safety.
Your altimeter must only be considered as an aid when checking your altitude. A
visual cross reference with the ground should be used in combination with any
altimeter.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 1 of 58
10/9/2017
Overview
Scope
This manual describes the setup and operation of Atlas.
For information on the companion software the Neptune Maintenance Utility, see
D-90107 User Manual, NMU.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 2 of 58
10/9/2017
Table of Contents
Table of Contents
Overview .......................................................................................................1
Scope ......................................................................................................1
Table of Contents ...........................................................................................2
About Atlas....................................................................................................4
Firmware Updates...........................................................................................4
Support.........................................................................................................5
Altimaster Field Support................................................................................5
Battery..........................................................................................................6
Initial Charge...............................................................................................6
Charge Using Computer ................................................................................7
Navigating Menus ...........................................................................................8
Hand Mount, Wrist Mount ................................................................................9
Helmet Mount .............................................................................................. 10
Computer Setup ........................................................................................... 11
Setup.......................................................................................................... 14
Set Time ...................................................................................................14
Set Date ................................................................................................... 15
Set Next Jump Number ............................................................................... 16
Set Total Freefall Time ................................................................................ 17
Set Total Canopy Time................................................................................ 18
Alarms ........................................................................................................ 19
Overview................................................................................................... 19
Enable/Disable........................................................................................... 20
Canopy Alarm Volume Level ........................................................................ 20
Set Altitudes.............................................................................................. 21
Freefall Alarm Altitude Spacing .................................................................... 22
Canopy Alarm Altitude Spacing .................................................................... 22
Set Alarm Type .......................................................................................... 23
Logbook ...................................................................................................... 24
Overview................................................................................................... 24
View Logbook ............................................................................................ 25
Go To a Jump ............................................................................................ 26
Delete a Jump ........................................................................................... 27
Odometer Reset ......................................................................................... 28
Select DZ .................................................................................................. 29
Select AC .................................................................................................. 30
Clocks and Timers ........................................................................................ 31

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 3 of 58
10/9/2017
Load Timer ................................................................................................ 31
Alarm Clock............................................................................................... 32
Sleep Timer............................................................................................... 33
Display Settings ........................................................................................... 34
Contrast.................................................................................................... 34
Backlight................................................................................................... 35
Flip Display................................................................................................ 36
Time Format.............................................................................................. 37
USA/Intl. Date Format ................................................................................ 38
Altitude in Feet/Metres................................................................................ 39
Temp in F/C .............................................................................................. 40
Speed mph/kmh ........................................................................................ 41
Demo Mode ................................................................................................. 42
Alarms...................................................................................................... 42
Show Screens ............................................................................................ 43
Training Mode .............................................................................................. 44
Manual Mode................................................................................................ 45
Cancel Manual Mode ................................................................................... 46
Drop Zone Offset.......................................................................................... 47
Zero DZ Offset........................................................................................... 49
I’m On the Ground........................................................................................ 50
I’m on a Jump.............................................................................................. 51
Delete All Logs ............................................................................................. 52
Disable/Enable Logging ................................................................................. 53
Format NVRAM............................................................................................. 54
Show Status ................................................................................................ 55
Software Reset............................................................................................. 56
Saltwater Immersion..................................................................................... 57
Servicing ..................................................................................................... 58

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 4 of 58
10/9/2017
About Atlas
Altimaster Atlas is the next generation of digital skydiving instruments. It is
Micro-USB rechargeable, has an anodized machined aluminum case, a toughened
glass lens, raised buttons recessed into the case for protection, and is waterproof
for up to six feet for one hour. Atlas has eight selectable alarm groups and alarms
can be set as freefall or canopy alarms. Measurement units can be set
independently. The altitude can be displayed in feet or metres, the date can be
displayed in US or International format, the temperature can be displayed in °C
or °F, and the speed can be set mph or kmh. Atlas comes with all of the
accessories needed for a variety of mounting options.
Altimaster Atlas is manufactured exclusively by Alti-2, Incorporated.
This guide supports the most current version of Atlas firmware ONLY.
To check your Atlas's current firmware version, go to Menu > Demo Mode > Show
Screens. The second screen will show both the serial and version numbers. Be
sure to exit the demo by pressing the middle key until you see a screen that says
Demo Finished. Press any key to continue.
The current version of Atlas firmware is on our website.
Altimaster Atlas
Overall Dimensions
2.44” x 1.69” x .47”
Weight:
1.4 oz (without mount)
Temperature
-20° C to +60° C
Max Depth (Waterproofing)
6 feet 1 hour
Body Material
Machined Aluminum
Battery Type
Rechargeable Lithium Ion
Firmware Updates
Just as your personal computer programs are regularly updated, you should keep
your Atlas up to date. Not only will you get the latest features, but also regular
system updates that will help keep your Atlas running smoothly.Firmware updates
are always free.
Firmware updates are provided via the Neptune Maintenance Utility (NMU)
embedded in Paralog®.For Atlas firmware updates, visit
http://forum.altimaster.com and download the latest version of Paralog®-NMU.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 5 of 58
10/9/2017
Support
Atlas and the Neptune Maintenance Utility (NMU) have a considerable number of
options and facilities covering alarm settings, log book, manual mode, DZ and AC
names, contrast, flip, backlight, etc. There are hundreds of combinations of
settings, and it is impossible to cover each one in detail. We have attempted to
cover the basics of all functions, however, if you have ANY problems or questions,
please call or e-mail us. We will do our best to help you get the most out of your
Atlas.
386-943-9333
[e-mail]
Our support forum is a great source of Alti-2 product information; we highly
recommend joining us there: http://www.alti-2.com/forum.php
Altimaster Field Support
Our global network of Altimaster Field Support Reps can assist you with many
things:
•Update your Atlas
•Help you set up your computer to do updates yourself
•Provide spare parts for any Altimaster altimeter
•Act as a direct link between you and us
•Troubleshoot problems you are having with any Altimaster product
You can find Altimaster Field Support members on drop zones around the world.
A complete list of our current Altimaster Field Support members is online:
http://www.alti-2.com/forumdisplay.php?23-Altimaster-Field-Support
If you are interested in becoming an AFS Rep, please visit our info page and send
us an e-mail telling us why!

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 6 of 58
10/9/2017
Battery
Initial Charge
Before using your new Atlas for the first time,
charge it overnight.
There are two ways to charge your Atlas:
•Use an AC Wall Charger with the USB cord.
•Plug the USB cord into your computer.
We recommend charging your Atlas no more
than once a week, charging more frequently
will reduce longevity of battery life.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 7 of 58
10/9/2017
Charge Using Computer
Before using your computer to charge your Atlas,
the USB Drivers should be installed. See Computer
Setup on page 11.
Using the USB cable supplied, connect Atlas to the
computer.
WARNING: DO NOT Remove O-ring from the cable,
this may cause damage and will void your warranty.
The charge is complete when the battery indicator
stops flashing.
Your Atlas may “sleep” after the charge is complete,
if left unattended for 30 minutes or more. In that
case, the screen will go blank. Press any button to
wake it up.
When it wakes up, the battery indicator may at first
read empty. This is normal; the battery is being
tested. The indicator will begin to read properly in
about two seconds.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 8 of 58
10/9/2017
Navigating Menus
The basics…
•The top and bottom buttons –up and down,
increase and decrease
•The middle button –select and go back
The details…
•The menu scrolls and wraps. So, once you scroll
and reach the end of the menu items it wraps
and goes back to the first item in the menu
•Use the top and bottom buttons to go up and
down within a menu
•Use the top and bottom buttons to increase or
decrease a value
•Holding the top or bottom buttons causes their
action to repeat, except in the Jump Log
•In the Jump Log, press and hold the top button
to view a previous jump; press and hold the
bottom button to view the next jump
•To select an item press the middle button and
release
•To go back to the previous screen press the
middle button and hold it until the screen
changes

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 9 of 58
10/9/2017
Hand Mount, Wrist Mount
If you wish to use your Atlas as a visual
altimeter, we suggest you use the hand
mount provided.
The finger webbing goes between the
back plate and the Atlas in its mount.
Then, use the screws provided to secure
the back plate to the mount (note: do
not over tighten). Finally, route the
strap through the opening of the finger
webbing as shown.
If you wish to wear your Atlas on your
wrist like a watch, use the wrist mount
provided.
The strap goes between the back plate
and the Atlas in its mount. Then, use
the screws provided to secure the back
plate to the mount (note: do not over
tighten).
Do not use the hand mount and wrist
mount together. Use one or the other.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 10 of 58
10/9/2017
Helmet Mount
As an audible, Atlas is designed for mounting inside
the helmet –most modern skydiving helmet
designs have pockets in the liner on one or both
sides specifically for this purpose. Rounded edges
and corners incorporated into Atlas’ design are
intended to keep it comfortably fitted near the ear.
Insert Atlas into the helmet’s audible pocket with
the speaker hole facing inward (toward the ear).
Failure to do so may result in inaudible alarms.
Ensure that the speaker and pressure sensor holes
remain unobstructed by items such as adhesive
VelcroTM or tape. The foam liner of the helmet
should not interfere with either function.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 11 of 58
10/9/2017
Computer Setup
Atlas uses a micro USB cable to link to your computer.
With the USB connection you can:
•Load custom settings from Paralog®-NMU
•Download the log book to Paralog®
•Charge the Atlas battery
•Update the Atlas firmware
Paralog®-NMU provides some functions not available on Atlas’s menus:
•Speed Group setup
•Alarm Tone programming
•Name list setup for Drop Zones, Aircraft Types, and Alarm Group Names
•Canopy screen format toggle
•Student Mode controls
Download and install the USB drivers
and Paralog®-NMU. If you are using
older versions of Windows, write down
the file path for the location where the
drivers were installed. You will need it
later.
If you are installing on a Mac running
OS X v10.10 or later, please read the
one page insert packaged with Atlas.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 12 of 58
10/9/2017
Computer Setup –2
Plug the USB cable into Atlas as shown.
Plug the USB cable into your computer; it
will detect that new hardware is present.
The installation wizard will start.
WARNING: DO NOT Remove O-ring from
the cable, this may cause damage and
will void your warranty.
Using older versions of Windows, if the
Found New Hardware Wizard starts, you
may be asked if you want to use
Windows Update to search for a driver.
Select No and click Next to continue.
You will then see the screen at left.
Select Install from a list or specific
location (Advanced) and supply
Windows with the location noted in an
earlier step.
If you see a warning message like this,
please select Continue Anyway.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 13 of 58
10/9/2017
Computer Setup - 3
(Older versions of Windows) The first
phase of driver installation finishes.
When you click on Finish, the second
phase begins.
As before, select to bypass checking
Windows Update by selecting No on this
screen.
If you see a warning message like this,
please select Continue Anyway.
Driver installation has finished.
Paralog®-NMU will now be able to
communicate with your Atlas.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 14 of 58
10/9/2017
Setup
Set Time
Menu > Clk/Timers > Set Time
On the Menu screen, scroll to and select
Clk/Timers.
Scroll to and select Set Time.
The hours, minutes and seconds appear
highlighted.
Press the middle button to select the hours,
minutes, or seconds.
To change a value, use the top and bottom
buttons.
Press the middle button to scroll to and select OK
to save the new time setting.
If you don’t want to make this change, scroll to
and select Cancel.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 15 of 58
10/9/2017
Set Date
Menu > Clk/Timers > Set Date
On the Menu screen, scroll to and select Clk/Timers.
Select Set Date.
The year, month, and day appear highlighted.
Press the middle button to select the year, month
or day.
To change a value, use the top and bottom buttons.
Press the middle button to scroll to and select OK to
save the new time setting.
If you don’t want to make this change, scroll to and
select Cancel.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 16 of 58
10/9/2017
Set Next Jump Number
Menu > Log Admin > Set Next Jump
On the Menu screen, scroll to and select Log Admin.
Press the middle button to select.
The cursor automatically highlights the next jump
number.
Press the middle button to select the place value
you wish to change.
Use the top and bottom buttons to change the
value.
Once you have the desired jump number, use the
middle button to scroll to and select OK.
Your new Next Jump Number will be displayed on the
Log Admin Screen.
To go back to the Menu screen press and hold the
middle button.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 17 of 58
10/9/2017
Set Total Freefall Time
Menu > Log Admin > FFTime
Atlas calculates and displays your accumulated freefall time. If you need to
adjust this figure, use the steps below.
On the Menu screen, scroll to and select Log Admin.
Scroll to and select FFTime.
Press the middle button to begin changing the
accumulated time.
Use the top and bottom buttons to change the
number of hours. Press the middle button to move
on to the minutes, and so forth.
Select OK to save your settings, or scroll to and
select Cancel to undo your changes.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 18 of 58
10/9/2017
Set Total Canopy Time
Menu > Log Admin > CPTime
On the Menu screen, scroll to and select Log Admin.
Scroll to and select CPTime.
Press the middle button to begin changing the
accumulated time.
Use the top and bottom buttons to change the
number of hours. Press the middle button to move
on to the minutes, and so forth.
Select OK to save your settings, or scroll to and
select Cancel to undo your changes.

D-90360 Manual, Atlas
User Rev B.doc
©2015 Alti-2, Inc
Page 19 of 58
10/9/2017
Alarms
Overview
Main Menu > Alarms
Atlas has eight groups of programmable alarms, each with three individually
selectable alarm altitudes.
There are two types of alarms from which to choose: freefall and canopy. You
may have one freefall alarm group and one canopy alarm group enabled at the
same time.
On the Ground screen there is a symbol indicating what kinds of alarms are
enabled.
Freefall and Canopy Alarms On
On the Ground screen, the underlined alarm icon
(musical note) indicates that freefall and canopy
alarms are activated.
Freefall and Canopy Alarms Off
You should disable alarms if you are using your
Atlas as a visual altimeter. The alarm icon will
change on the Ground screen to show that the
alarms have been disabled.
Only Freefall Alarms On
The alarm icon without underline indicates that only
freefall alarms are activated.
Only Canopy Alarms On
The canopy alarm is indicated with the abbreviation
CNP.