Atlona AT-HD-V14 User manual

AtlonA
1x4 HDMI v1.3 Distribution Amplifier
MODELS: AT-HD-V14
User Manual

TABLE OF CONTENTS
1. Introduction .................................................. 1
3. Specifications & Package Contents ............................ 2
4. Panel Descriptions .................................................. 3
5. Hardware Installation .................................................. 3
6. Notice .................................................. 4
7. Safety Informations .................................................. 5
8. Warranty .................................................. 6

Introduction
The Atlona AT-HD-V14 1x4 HDMI 1.3 Distribution Amplifier provides the most cost effective and
advanced HDMI 1.3 splitter solution on the market, by which the high definition video and high qual-
ity audio can be transmitted to 4 different locations without losing quality. With built-in USB firmware
update mechanism, the compatibility among countless HDMI sources and receivers can be further
guaranteed. With 12 bit deep color video and high definition audio support, AT-HD-V14 is suitable
for high quality A/V broadcasting, digital signage and education applications!
Features:
• HDMI 1.3c and DVI 1.0 compliant
• HDCP 1.2 compliant
• Wide Frequency Range: 25MHz~225MHz
• Video bandwidth: 6.75GBPS
• Supports conversion of HDMI signaling to DVI
• Resolution up to 1080p or WUXGA
• Automatic EDID learning
• Supports xvYCC
• Supports CEC (not bypassing)*
• USB firmware update for expanding compatibility
• Supports Dolby Digital, DTS-HD and Dolby True HD audio
• Easy installation
Automatic EDID learning will detect all the connected HDMI equipped monitors and analyze all
the content of EDID. The EDID with minimal resolution support will be the reference EDID for in-
coming HDMI source players.
1
*Depends on models

Specifications & Package Contents
2
Model Name AT-HD-V14
Technical
HDMI compliance HDMI 1.3c [Deep Color, xvYCC color space supported]
DVI compliance DVI 1.1
HDCP compliance Yes
Video bandwidth Single-link 225MHz [6.75Gbps]
Video support Up to WUXGA [1920x1200@60Hz] & UXGA [1600x1200@60Hz]
Audio support DTS-HD Master Audio, Dolby TrueHD
Dolby Digital, DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact
discharge]
[2] Core chipset — ±2kV
PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω]
USB firmware updatable YES
Input TMDS signal 1.2 Volts [peak-to-peak]
Input DDC signal 5 Volts [peak-to-peak, TTL]
Input 1x HDMI [7.1ch audio & video]
Output 4x HDMI [7.1ch audio & video]
HDMI connector Type A [19-pin female]
Mechanical
Housing Metal
Dimensions (L x W x H) Model: 180x108x27mm
Package: 330x200x95mm
Carton: 495 x 440 x 380mm
Weight AT-HD-V14: 2 [lbs] / Package: 3 [lbs]
Mounting Wall-mounting case with screws upon request
Power supply 5V 2A DC
Power consumption 4 Watts [max]
Operation temperature 0~40oC [32~104oF]
Storage temperature -20~60oC [-4~140oF]
Relative humidity 20~90% RH [no condensation]
Package Contents 1x AT-HD-V14 1x 5V power adapter 1x User Manual

Panel Descriptions
3
Rear Panel
1. HDMI IN: HDMI input source
2. HDMI OUT: Distributed HDMI outputs
3. USB IN: For firmware update use only
4. Power Indicator: When powered on, the LED will blink.
5. DC IN: 5V 2A
When the connected HDMI equipped monitor is verified as HDMI and HDCP compliant, the cor-
responding green LED will blink.
Hardware Installation
Broadcasts HDMI signal to 4 HDMI displays!
1. Switch off all devices, including monitors.
2. Connect to the receivers.
3. Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.
4. Plug in 5V DC power supply.
5. Power on the HDMI monitors.
6. Power on the HDMI source.
12345
HDMI source
Up to 4 HDTV’s
AT-HD-V14
HDMI cables

Notice
1. While connecting a new monitor to the splitter, experiencing a short period no display may be
expected. Automatic EDID learning will analyze the newly connected monitor to see if the EDID
for the HDMI input is necessary to update!
2. For long range high definition HDMI transmission applications, please adopt CAT-5 cable
based HDMI extenders.
4

5
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture.
If the wall plug does not fit into your local
power socket, hire an electrician to replace
your obsolete socket.
Do not modify the wall plug.
Doing so will void the warranty and safety
features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in case it requires
disconnection.
Precautions
FCC Regulations state that any
unauthorized changes or modifications to
this equipment not expressly approved by
the manufacturer could void the
user’s authority to operate this
equipment.
Operate this product using only the
included external power supply. Use of
other power supplies could impair
performance, damage the product or cause
fires.
In the event of an electrostatic discharge,
this device may automatically turn off. If this
occurs, unplug the device, and plug it back
in.
Protect and route power cords so they will
not be stepped on or pinched by anything
placed on or against them. Be especially
careful of plug-ins, or cord exit points from
this product.
Avoid excessive humidity, sudden
temperature changes or temperature
extremes.
Keep this product away from wet locations
such as bathtubs, sinks, laundries, wet
basements and swimming pools.
Use only accessories recommended by
ATLONA to avoid fire, shock or other
hazards.
Unplug the product before cleaning. Use
a damp cloth for cleaning. Do not use
cleaning fluid or aerosols, which could
enter the unit and cause damage, fire or
electrical shock. Some substances may
also mar the finish of the product.
Never open or remove unit panels or make
any adjustments not described in this
manual. Attempting to do so could expose
you to dangerous electrical shock or other
hazards. It may also cause damage to your
AT-HD-V14. Opening the product will void
the warranty.
Do not attempt to service the unit. Instead
disconnect it and contact your Authorised
ATLONA reseller or contact ATLONA
directly.

WARRANTY
LIMITED ONE-YEAR WARRANTY
ATLONA by Lenexpo Electronics warrants only to the initial purchaser of this product for a period of one
year from the date of purchase from an Authorized ATLONA Reseller, the product will be free of electrical
and mechanical defects that materially affect the products operation as described in this users manual.
Within this period, ATLONA will, at it’s sole option, repair or replace any components, which fail of normal
use or refund the net original price.
DISCLAIMER OF WARRANTY
ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
ARE LIMITED TO ONE YEAR FROM PURCHASE; ALL OTHER EXPRESS OR IMPLIED CONDITIONS,
REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-
INFRIGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights, which vary by jurisdiction.
LIMITATION OF LIABILITY
TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL ATLONA OR ITS SUPPLIERS BE
LIABLE FOR ANY LOST REVENUE, PROFIT OR DATA, OR FOR SPECIAL, INDIRECT, CONSEQUEN-
TIAL, INCIDENTAL, OR PUNITIVE DAMAGES, HOWEVER CAUSED REGARDLESS OF THE THEO-
RYOF
LIABILITY, ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT,
EVEN IF ATLONA HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT
ATLONA’S LIABILITY TO YOU, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE),OR
OTHERWISE, EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. The foregoing limitations
will apply even if any warranty or remedy provided to you fails its essential purpose. Some jurisdictions do
not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of or
exclusion may not apply to you.
Disclaimer
This document is provided for technical information for the user. It does not create any warranty with re-
spect to the product, and does not modify or enhance the terms of the warranty that may accompany this
product.
ATLONA reserves the right to modify the information in this document as necessary.
ATLONA holds no responsibility for any errors that may appear in this document. Customers should take
appropriate action to ensuretheir use of the product does not infringe upon any patents. ATLONA respects
valid patent rights of third parties.
Trademarks and Copyrights All other product names or marks referenced herein are trademarks or regis-
tered trademarks of their respective owners. ATLONA
2151 O’toole Ave, Ste D
San Jose CA 95131
Toll Free: 1-877-536-3976
International: 408-954-8782
FAX: [phone]
Website: www.atlona.com
E-MAIL: [email protected]
6