Atomberg MG 1 User manual

Atomberg Technologies Pvt Ltd
Corporate office:
Rupa Solitaire, Office No. 1205
Millenium Business Park
Mahape, Navi Mumbai, Maharashtra 400 710
Manufacturing unit:
Plot No. D-130 A and B, TTC Industrial Area
Shirawane, Navi Mumbai 400 706
Instruction Manual
& Warranty Card
MG 1

INDEX
1. What this box contains
2. Product specifications
3. Important pointers
4.1 How to use the jars
4.2 Using the chopper jar
4.3 Locking and unlocking the chopper jar lid
5. Food group mapped to each jar
6. Recommended quantities
7. LED indication
8. Do’s and Don’ts
9. How to clean and maintain the product
10. Troubleshooting
11. Warranty registration
on your smartest purchase ever!
Please don’t stop showing us off.
For everything you need to know,
please read the guidelines.
Please do save this booklet as this
also doubles up as a warranty card!
Congratulations

1. What this box contains 2. Product specifications
1. Base unit with switch knob
2. Small lid (measuring cup)
3. 1.6 L jar lid with gasket
4. 1.6 L liquidiser jar
5. 1.0 L jar lid with gasket
6. 1.0 L dry grinding jar
7. 0.5 L jar lid with gasket
8. 0.5 L chutney jar
Optional attachment
9. 0.5 L chopper jar lid with gasket
10. Chopper jar blade: top
11. Chopper jar blade: bottom
12. Chopper jar
13. Spatula
1
9
10
12
13
2
3
4
5
6
7
8
11
Model No.: MG 1
Voltage : 2 3 0 V
Frequency: 5 0 H z
Power: 485 W
Motor type: Inverter Technology motor
Jar capacity
Liquidiser jar
Dry jar
Chutney jar
Chopper jar
1.6 L
1.0 L
0.5 L
0.5 L
0.8 L 0.6 L
0.5 L 0.4 L
0.3 L
Rated capacity
Dry Wet
SizeJar
Gross weight
Size of carton
Warranty
5.5 KG [approx.]
505 X 255 X 320 mm
2 years on motor and product
Caution: This is not intended for use by persons [including
children] with reduced physical, sensory or mental capabilities.
Or by those with lack of experience and knowledge;
unless they are under supervision or have been given instructions
concerning use of the appliance by a person responsible
for their safety. Children should always use this under strict
supervision.
Switch knob: Rotary switch with slow,
1
st, 2nd, 3rd speeds and
a pulse button.
Insulation: Class F
Protection: Class I
Rating: Total rated ON time 30 minutes (max.),
continuous ON for 3 minutes (max.)
and OFF for 2 minutes (min.).
Material of body: ABS body
Material of jars: Stainless steel
Power cord: PVC insulated 3 core flex cord with
plug-top & earthing
Country of origin: India
Speed
Slow
Max. speed
Stainless steel jars
5000
18000 speed control
Chopper jar
2000 RPM
optimised RPM
for all speeds
No load RPM
Not
recommended
Not
recommended
0.3 L

Note: It is recommended to use the stainless steel jars on speed 3 to grind hard ingredients such as turmeric,
cinnamon, nutmeg (and the like) for better results.
1. Ensure that the knob is at ‘0' before placing the jar.
2. Add the ingredients to the specific jar not anymore than the recommended quantity.
3. Ensure that the lid gasket is placed properly on the jar lid.
4. Don’t use Slow Mode to grind hard ingredients such as turmeric, cinnamon, nutmeg (and the like).
5. Don’t remove the jar while grinding.
Precautions:
1. Ensure that the power cord has no damages and the supply voltage is as per the standards before
switching on the appliance.
2. Ensure there is no water ingress in the power cord or the main supply.
3. Never use wet hands to fix the plug and switch on the mains or to operate the knob.
4. Ensure that proper earthing has been done.
5. Ensure you place the mixer grinder on a clean and dry surface.
6. Do not run the jars without any ingredients in them.
Warning
1. Never immerse the mixer grinder in water or any other liquid for cleaning. Never use abrasive liquids
for cleaning any part.
2. Do not touch any moving parts while operating the mixer grinder.
3. If the supply cord is damaged, it must be replaced by the manufacturer/ their service agent/a similarly
qualified person to avoid any hazard.
3. Important pointers 4.1 How to use the jars
Note: The Atomberg MG 1 will not operate if the jars are not placed and fixed properly.
1. Prepare the ingredients required for grinding: if the pieces are too big, please chop them up further.
2. Add the recommended quantity (refer to sec 7) of ingredients to the jar.
3. Fix the jar in base unit and rotate clockwise to lock. (refer to sec 5 for more details on LED indication).
4. Run on Slow Mode or 1/2/3 speeds as required.
5. Hold the lid firmly while grinding.
6. Remove the lid and add water/ingredients and stir using a stirrer as required.
7. Close the lids and resume grinding.
8. The small lid used in the 1.6 L jar is used to add water/ingredients without removing the entire lid.
The small lid also acts as a measuring cup.

4.2 Using the chopper jar 4.3 Locking and unlocking the chopper jar lid
Note:
1. The chopper jar runs at an optimised speed of 2000 RPM regardless of the speed/pulse selected.
2. The entire LED strip will glow when using the chopper jar.
1. Place the lid on the jar and rotate anti-clockwise as shown in the picture.
2. Ensure that the lid is securely locked.
3. To unlock, turn the lid clockwise and lift. (refer to the lock/unlock symbols
marked on the lid of the jar)
1. Prepare the ingredients required for chopping: if the pieces are too big,
chop them up into smaller pieces.
2. Fix the blade with shaft in the chopper jar as shown in the picture.
3. Add the ingredients to the jar according to the recommended quantity.
4. Securely lock the jar lid as per the instructions given in sec 4.3
5. Fix the chopper jar in base unit and rotate clockwise to lock.
(refer to sec 5 for more details on LED indication).
6. Recommended speed for chopping is pulse.
7. Remove the lid by turning it in the anticlockwise direction to add ingredients
or stir using a stirrer as required.
8. Close the lids and resume chopping as required.
CAUTION:
The chopper blade is very sharp. Handle with utmost care while handling and cleaning.
How to assemble the blade:
Place the top blade in the blade shaft.
Align it with the grooves and rotate it in anti-clockwise direction to lock it.
Twist the top blade in clockwise direction to remove it for cleaning.

The jars are not suitable for whisking egg whites
Quantity SpeedRecipe Time
Jar
1.6 L liquidiser jar
Grinds rice and dal for idlis, dosas, vadas. Juices seeded fruits.
Blends fleshy fruits. Churns butter. Ideal for preparing milkshakes,
lassi, slushies.
1.0 L dry grinding jar
Grinds all types of masalas like garam masala, Kohlapuri masala, rice,
dal, coffee, turmeric etc.
0.5 L chopper jar
Chops small quantities of vegetables like onion, garlic, ginger, etc.
0.5 L chutney jar
Prepares various kinds of chutneys and dips including garlic and ginger paste.
Also used to make coarser dips like salsa, pesto, momo chutney, etc.
5. Food group mapped to each jar 6. Recommended quantities
1.6 L jar Urad dal
Rice batter
Butter churning
Garam masala
Wet masala
Coconut chutney
Baby food
Salsa
Onion chopping
Carrot/beetroot
Garlic/ginger,
mixed nuts
Herbs
(coriander/mint)
5 min (max.)
5 min (max.)
2 min
2 min
2 min
2 min
1 min
5 sec
6-7 pulses
6-7 pulses
6-7 pulses
10-15 pulses
Slow Mode, Speeds 1,2,3
(use ‘3’ for best results)
Pulse
Slow Mode
Speeds 1,2,3
Speeds 1,2,3
Speeds 1,2,3 or Slow Mode
for a coarser texture
Slow Mode
Slow Mode
Pulse
Pulse
Pulse
1.0 L jar
0.5 L jar
Chopper
jar
200 g dal + 450 ml water soaked for 5-6 hrs +
50 ml water during grinding
250 g rice + 250 ml water soaked for
5-6 hrs + 75 ml water during grinding
300 g of fermented cream(collected from raw
milk) + 800 ml cold water
200 g of mixed spices, roasted and cooled
200 g of onion, tomato and other spices sauteed
and cooled
60 g of coconut, coriander leaves, ginger, green
chilli and 20 ml water
150 g of boiled and cooled carrot, potato and milk
150 g of onions cut into quarters
150 g of vegetables cut into 1 inch pieces
100 g
25 g
75 g tomato, 75 g onion, chillies, herbs. salt,
lemon juice

Mixer grinder is OFF and not
connected to the power source
Action LED indication Image
7. LED indication
Mixer grinder is ON and
the jar is locked properly
Mixer grinder is ON and connected
to a power source but no jar
is placed on the mixer grinder
Knob is set at Slow Mode.
No LED indication
The LED will turn orange
The LED strip till ‘Slow’ will turn blue
The LED will now turn to blue with
short beeps to indicate that the jar
is properly locked
Knob is set at speeds 1, 2 and 3
Action LED indication Image
Power resumes when the knob
is set at any speed
Pulse mode/ When the chopper jar
is in use
Jar is suddenly removed during
running condition
The LED strip will turn blue till
the set speed option
The entire LED strip will turn blue
Sudden power failure while
MG 1 is in use All lights will turn OFF
Red LED will glow. Other LED will blink
in blue colour.
The red light around the caution will
start glowing with longer buzzes. Please
reset the knob to ‘0’ to restart the
grinding/chopping process.
Overheating of motor/Overloading
The red light around the caution symbol
along with the blue light will start
glowing with long buzzes. Turn the
knob to 0 and let the mixer grinder rest
until the motor cools down (in case of
overheating) or remove excess material
(in case of overloading). Resume the
grinding or chopping process then.

Dos
•
When operating the mixer grinder for the first time or after a while or after it has been
shifted over a long distance; rotate the motor shaft by hand through the motor coupler
until the motor shaft rotates freely (ensure the plug is not connected to the power socket).
•
Unplug from power socket before fixing the unit, removing attachments, while
cleaning or when not in use.
•
Ensure that the locks of the chopper jar are properly seated in the locking grooves
provided inside the top cap.
•
Ensure that the lid is fixed properly as per the instructions on the jar before starting
the mixer grinder.
•
Ensure that the blade is fitted properly.
•
Always ensure that the voltage indicated in the power cord of the appliance (230V)
corresponds to the local electrical voltage. If there are any major fluctuations,
avoid using the appliance.
•
Always hold the lid while grinding.
•
Always use the spatula to mix or remove the ingredients from the jar. Do not use your
hands, knives or any other sharp object.
•
Always wash the jars before the first use.
Don’ts
•
Do not touch moving parts, while operating the mixer grinder.
•
Do not overload the jars. When there is any abnormal noise, switch off the mixer, remove excess
ingredients or add some liquid before resuming grinding.
•
Do not remove the small lid and add solid ingredients, when the motor is running.
•
Do not operate with a damaged power cord. Do not stretch the power cord.
•
Do not tamper or attempt to repair the mixer grinder on your own. Contact Atomberg’s service centre.
•
Do not grind hot ingredients in the mixer grinder.
•
Do not run the mixer grinder without the top lid fixed on the jar.
•
Never put your hand inside the jar without switching off the power supply.
•
Do not place the mixer grinder on an unstable or a slippery surface.
•
Do not leave the appliance unattended when it is in use.
•
Do not load the jars beyond the recommended quantity.
•
Do not keep this appliance near a source of heat like ovens, gas stove, etc.
•
Do not use other accessories such as jars/lid which have not been provided with this appliance.
•
Never use plates instead of lids.
8. Dos and Don’ts

Switch off the appliance and remove the plug from the electrical socket.
Base unit:
Clean the main unit using a damp cloth. Do not use abrasive cleaning agents.
Jars:
1. Hold the jar under running water for a minute after each use to remove the residue.
2. Fill half of the jar with water and add a spoon of any mild cleaning powder/liquid.
3. Place it on the mixer grinder and run it for 90 seconds.
4. Rinse and dry.
5. Always store jars in an inverted position to allow water to drain off.
6. Regularly clean the jars and gaskets after each use.
Caution:
1. Never immerse the main unit in water or any other liquid. Do not pour any liquid over it.
2. Never immerse the jars in water or any other liquid for a long duration.
3. Do not wash the jars in a dishwasher.
9. How to clean and maintain the product 10. Troubleshooting
Mixer grinder is not running
Indication(Problem) Reason Solution
Unit overheating
No LED indication
Abnormal noise observed
Leakage from the lid
Leakage from the coupler area
Appliance emanates a plastic smell
the first couple of times
Jar is not placed properly Place the jar properly till the blue light glows and buzzes
Rotate the knob to ‘0’; make sure LED indication is blue
when the jar is placed
Contact the Atomberg service centre
Ensure there is a proper power supply
Contact the Atomberg service centre
Ensure the blade is properly fixed and tightened
Use desired speed as per the requirement
Remove some ingredients or process in smaller batches
Check and remove heat source, if any.
Start the mixer grinder after motor cools down
Use the recommended quantity
Use the recommended quantity
Use ingredients of optimal size and type
Ensure the blade is properly fixed and tightened
Ensure that the gasket has been fitted properly to the lid
Use recommended quantities
Contact the Atomberg service centre
It will get okay gradually. If the problem persists,
contact the Atomberg service centre.
Mixer grinder is showing an error indication
Other reasons
No power supply
Damaged LED
Loose blade
Mixer grinder is set on Slow Mode
Overloading the jar
External heat source
Running the appliance for more than
5 minutes continuously
Overloading with ingredients
Overloading the jar
Using hard ingredients or ingredients have not
been chopped to an appropriate size
Blade may be loose
Gasket has not been fitted properly/ No gasket
Overloading the jar
Bush worn out
This is normal during initial usage
Takes more time for mixing/blending
Abnormal vibration in the appliance

Warranty exceptions
1. The product has not been purchased through a verified seller or through our website
2. Details given are incomplete while registering the product
3. Not duly signed by the authorized dealer or registered on the website
4. Used for commercial purpose
5. Damaged/tampered serial number/bar code
6. Damage caused by using accessories which have not been provided with the product
7. Loss or damage to the motor or any accessory caused by normal wear and tear rather
than due to defect in materials or workmanship.
8. Loss or damage resulting from improper installation or other failure to comply
with instructions given in your owner’s manual.
9. Loss or damage resulting from conditions beyond our reasonable control, including
without limitation, repairs not made at our factory or authorized service provider, use of parts
or accessories not provided to you as part of this warranty by our factory or authorized
service providers or mishandling, unreasonable use, misuse, abuse, modifications or other damages caused
by you or a third party to your fan while not in our possession.
10. The warranty explicitly provided for herein is the sole warranty provided in connection with the product and no other
warranty, expressed or implied, is provided.
11. ATOMBERG assumes no responsibility for any other claims, especially ones not stated in this warranty.
12. The company’s liability will never exceed the value of the product.
13. The company will not be responsible for delay in repair/service due to unavoidable circumstances.
14. This warranty is only valid within the states and union territories of India.
15. No other written or oral warranties apply, and no other agent, employee, dealer or any other person
is authorized to give any warranties (explicit or otherwise) on behalf of Atomberg.
Warranty registration
To register for warranty and/or any assistance, please contact
www.atomberg.com or 8448449442
Note: Warranty will start from the date of purchase.
The easiest steps to avail our services
The Atomberg MG 1 comes with a 2 year warranty. To register for warranty, enter the details below.
Please scan this QR Code
for warranty registration
Customer’s Name
Address
City
Telephone
E-mail Model
Serial No.
Date of Purchase
Dealer’s Name
Dealer’s Signature and Stamp Customer’s Signature
Date of Expiry
Mobile
Pin State