ATOMI AT1359 User manual

Can’t connect? Need help?
Call 1-800-757-1440
Mon-Fri 9:00-5:00 EST (US)
WE
CAN
HELP
DO NOT RETURN THIS
PRODUCT TO THE STORE
Smart Aroma Diuser
Wi-Fi
Date Code: 05/19
User Manual
Watch Video
Open your smartphone camera
and point it at the QR Code
Download Free APP

IMPORTANT SAFEGUARDS
1 2
TO AVOID RISK OF ELECTRICAL SHOCK, always make sure the Smart
Aroma Diuser is unplugged from the electrical outlet
before relocating, servicing, or cleaning it.
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of re, electric shock, and / or injury to
persons, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
1. DO NOT move once the diuser has been lled with water.
2. DO NOT operate outdoors. This diuser is intended for indoor
use only.
3. Disconnect the diuser from power before cleaning.
4. DO NOT operate without water. Always have water in the base
when operating.
5. Use only clean, cool water to ll the base. Do not use hot water.
6. DO NOT pour water into any openings other than the base.
7. DO NOT cover any openings on the unit or insert objects into
any openings.
8. DO NOT aim mist directly at children, pets, walls, furniture or
electrical appliances.
9. Use only with the provided electrical cord.
10. ALWAYS plug and unplug diuser with dry hands to avoid
electric shock.
11. Never operate the diuser with a damaged cord or plug.
12. Always place the unit on a smooth, at, lint-free, non-metallic,
waterproof and level surface.
13. Position the diuser away from direct sunlight.
14. Keep the cord away from heated surfaces and areas where it
could be walked on or tripped over.
15. Unplug the diuser when not in use and whenever you clean
or move the unit.
SAVE THESE INSTRUCTIONS
16. The diuser should not be left unattended in a closed room.
17. The diuser requires daily and weekly cleaning to operate
appropriately. Refer to cleaning instructions.
18. NEVER use detergents, solvents or abrasive agents to clean
the diuser.
19. Do not tilt, tip or attempt to empty or l the diuser while it is
in operation.
Although your diuser is easy to operate, for your safety, the below
warnings must be followed:
1. Do not place the diuser near a heat source.
2. Never leave the diuser unattended while connected to the
electrical outlet.
3. To avoid any accidents, never cover the lid when the diuser
is in operation.
4. Use the diuser on a smooth, at, lint-free, non-metallic,
waterproof, and level surface away from water.
5. Do not unplug from the wall socket by pulling on the
supply cord.
6. The diuser must be unplugged:
A. Before either lling or emptying the base.
B. Before any cleaning or maintenance is performed.
C. After each use.
D. If it appears to be faulty.
NOTE: This product is intended for HOUSEHOLD USE ONLY.
Safety Warning

Designed to ll the air with fragrance and moisture,
the atomi Smart Aroma Diuser is a perfect tool for
aromatic relaxation. Just add a few drops of your
favorite essential oil with water in the tank and
unwind. Control the Smart Aroma Diuser from
anywhere at anytime using your smartphone.
The Smart Aroma Diuser uses ultrasonic waves to
instantly vaporize water and essential oil in the tank,
to produce a cool, dry fragrant mist.
Before you begin
1. Know your Wi-Fi network and password.
2. Make sure your mobile device is running
iOS®8 or higher or Android™ 4.1× or higher.
3. Make sure you’re connected to a 2.4GHz
Wi-Fi network (atomi smart can’t connect
to 5GHz networks).
3 4
TO AVOID RISK OF ELECTRICAL SHOCK, always make sure the Smart
Aroma Diuser is unplugged from the electrical outlet
before relocating, servicing, or cleaning it.
When using electrical appliances, basic safety precautions should always
be followed to reduce the risk of re, electric shock, and / or injury to
persons, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
1. DO NOT move once the diuser has been lled with water.
2. DO NOT operate outdoors. This diuser is intended for indoor
use only.
3. Disconnect the diuser from power before cleaning.
4. DO NOT operate without water. Always have water in the base
when operating.
5. Use only clean, cool water to ll the base. Do not use hot water.
6. DO NOT pour water into any openings other than the base.
7. DO NOT cover any openings on the unit or insert objects into
any openings.
8. DO NOT aim mist directly at children, pets, walls, furniture or
electrical appliances.
9. Use only with the provided electrical cord.
10. ALWAYS plug and unplug diuser with dry hands to avoid
electric shock.
11. Never operate the diuser with a damaged cord or plug.
12. Always place the unit on a smooth, at, lint-free, non-metallic,
waterproof and level surface.
13. Position the diuser away from direct sunlight.
14. Keep the cord away from heated surfaces and areas where it
could be walked on or tripped over.
15. Unplug the diuser when not in use and whenever you clean
or move the unit.
Thank you for purchasing
the atomi Smart Aroma Diuser
16. The diuser should not be left unattended in a closed room.
17. The diuser requires daily and weekly cleaning to operate
appropriately. Refer to cleaning instructions.
18. NEVER use detergents, solvents or abrasive agents to clean
the diuser.
19. Do not tilt, tip or attempt to empty or l the diuser while it is
in operation.
Although your diuser is easy to operate, for your safety, the below
warnings must be followed:
1. Do not place the diuser near a heat source.
2. Never leave the diuser unattended while connected to the
electrical outlet.
3. To avoid any accidents, never cover the lid when the diuser
is in operation.
4. Use the diuser on a smooth, at, lint-free, non-metallic,
waterproof, and level surface away from water.
5. Do not unplug from the wall socket by pulling on the
supply cord.
6. The diuser must be unplugged:
A. Before either lling or emptying the base.
B. Before any cleaning or maintenance is performed.
C. After each use.
D. If it appears to be faulty.
NOTE: This product is intended for HOUSEHOLD USE ONLY.
Inside the box you’ll nd: LOW Mist
Press for low
mode mist
HIGH Mist
Press for high
mode mist
Wi-Fi
Long press to
connect to
Wi-Fi setup
ON/OFF
Powers ON/OFF
Smart Aroma Diuser.
LED Light
Indicates which
mist mode is selected.
User ManualPower SupplySmart Aroma Diuser
Getting to know the Smart Aroma Diuser
Specications
Power Supply
Input: 100-240V~50/60Hz 0.4A
Max Output: 24V --- 500mA
Smart Aroma Diuser
Input: 24V --- 500mA
Working Frequency: 2.4MHz
Tank Capacity: 400ML Watts:12W

Step 2:
Add
5 6
Step 1:
Plug in
1. Know your Wi-Fi network and password.
2. Make sure your mobile device is running
iOS®8 or higher or Android™ 4.1× or higher.
3. Make sure you’re connected to a 2.4GHz
Wi-Fi network (atomi smart can’t connect
to 5GHz networks).
Remove the outer cover and the
water tank cover. Plug the Smart Aroma Diuser
into Power Outlet.
Using the measuring cup, carefully add cool
water to the reservoir. Add desired essential
oils to the water tank.
NOTE: Do not exceed the maximum level. Do not add water while the diuser is on.

Step 4:
Register
Enter your mobile phone
number or email address.
7 8
Step 3:
Download App
Download the atomi smart app from
the App Store or Google Play.

Step 5:
Add Device
Select “Add Device”
or click (+) at the top
right corner of the
devices screen.
Choose
“Smart Aroma Diuser”
from the device list.
910
Enter the verication
code and create
a password.
Log into
the app.

Hold the Wi-Fi button
for 5 seconds until the indicator light
rapidly blinks, then press“Continue” on
the atomi smart app.
11 12
Enter your Wi-Fi
network and
password.
The atomi smart
app will connect
your device.
Step 6:
Wi-Fi Setup

Schedule
1413
Sets weekly
schedules to
t your lifestyle.
Spray Countdown
Press to
change mist
spray intensity.
Sets a
countdown
to shut o spray.

Troubleshooting
Cannot connect to your Wi-Fi network.
Make sure you entered the correct Wi-Fi password during the
Wi-Fi setup. Check whether there are problems with your
internet connection. If the Wi-Fi signal is too weak, reset your
Wi-Fi router and try again.
Setup is not working properly.
1. Close all apps that are running in the background then
re-open the atomi smart app.
2. Uninstall and reinstall the atomi smart app then repeat
the setup process.
Smart Aroma Diuser will not turn ON/OFF
Check to see if there’s enough water in the tank. If not use the
measuring cup to ll tank with appropriate amount of water.
Check that the plug is fully inserted into the bottom of the
base.
Cleaning and Maintaining
your Smart Aroma Diuser
CAUTION: Always be sure the Smart Aroma Diuser is switched OFF, unplugged
before cleaning or attempting to store the item.
Care and Cleaning
After using 5-6 times, or 3-5 days, please clean the product as
follow:
1. Unplug the unit from power supply and remove cover.
2. Pour out any remaining water from the tank.
3. Add a small amount of warm dish detergent, and wipe it
gently, then use a cleaning cloth to dry it gently.
4. Pour water away from the air outlet.
5. Do not use other acids or enzyme detergents, as this
may give o hazardous gas or cause malfunction.
6. If diuser is not used for an extended period, drain water
from the reservoir and allow to dry. Before using, clean
the reservoir with a mild detergent.
NOTE: Be sure to use a mild detergent.
Storing
Allow the Smart Aroma Diuser to dry o completely before
storing. Store in a dry location. Do not place heavy items on top
of the Smart Aroma Diuser during storage as this may result in
possible damage.
1615
There is no mist being emitted.
1. Check the water level. The unit shuts o automatically
when the water level is too low as a safety feature.
2. Make sure nothing is blocking the Mist Output.
3. Check the fan vent on the bottom of the base is
not blocked.
4. Empty and rinse the water reservoir with cool tap water.

Setup is not working properly.
1. Close all apps that are running in the background then
re-open the atomi smart app.
2. Uninstall and reinstall the atomi smart app then repeat
the setup process.
17 18
Care and Cleaning
After using 5-6 times, or 3-5 days, please clean the product as
follow:
1. Unplug the unit from power supply and remove cover.
2. Pour out any remaining water from the tank.
3. Add a small amount of warm dish detergent, and wipe it
gently, then use a cleaning cloth to dry it gently.
4. Pour water away from the air outlet.
5. Do not use other acids or enzyme detergents, as this
may give o hazardous gas or cause malfunction.
6. If diuser is not used for an extended period, drain water
from the reservoir and allow to dry. Before using, clean
the reservoir with a mild detergent.
NOTE: Be sure to use a mild detergent.
FCC Notice:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
two following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
CAUTION: Suitable for indoor use only.
Made in China
Manufactured and marketed by Atomi, Inc.
10 West 33rd St. Suite 520, New York, NY 10001 atomi™ is a trademark of
Atomi, Inc.
Designed by atomi in New York. Made in China
One-year limited warranty from date of purchase against defects in
materials and workmanship. Google is a trademark of Google LLC. Amazon,
Alexa and all related logos are trademarks of Amazon.com, Inc. or its
aliates.
There is no mist being emitted.
1. Check the water level. The unit shuts o automatically
when the water level is too low as a safety feature.
2. Make sure nothing is blocking the Mist Output.
3. Check the fan vent on the bottom of the base is
not blocked.
4. Empty and rinse the water reservoir with cool tap water.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any inte rference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interferenceto radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help. Radiation
Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator and your body.
Table of contents
Other ATOMI Accessories manuals