Atomic AF6 How to use

AmpliFIRE 6.0
Release Notes
for
AmpliFIRE, AF6 & AF12
This firmware and editor have been tested rigorously both internally and by our
beta team. As always, however, it is HIGHLY recommended that you back up
your presets/settings before proceeding. In the unlikely event that something
goes wrong during the update and your presets are comprised you’ll be very
happy that you did. Regardless of whether your updating or not, backing up
your unit is good practice and should be done when significant changes have
been made.
Updating to the latest firmware version is easy. Just follow these steps:
•BE SURE TO USE A PROPER POWER SUPPLY! Not doing so could damage
your AmpliFIRE during the update process. Use the factory power supply
or a power supply that meets these specifications: 9 or 12 volt power
supply (DC or AC, either polarity), 1A minimum . Accepts a standard 2 .1mm
coaxial plug (either polarity).
•Delete or move any older versions of editor to another location to avoid
confusion.
•Download and unzip the latest Mac or PC editor from the “Support &
Downloads” tab of Atomic’s website to a convenient location
•Connect AmpliFIRE to computer via USB
•Open editor and let it sync with the device
•Select “Update Firmware” under the “File” tab (the most current firmware
is build into the latest editor)
•Follow on screen instructions
NOTE: If after updating the firmware the contrast of the LCD display on the
AmpliFire is difficult to read, click on the GLOBAL tab of the editor application. In
the bottom, right corner you will find the CONTRAST parameter. Set the value to
LEVEL 4 or whatever allows you to view the display properly.

New Features:
PITCHSHIFTER (Only available for AmpliFire 6 and AmpliFire 12)*
The PITCHSHIFTER effect block is capable of simple detuned, chorus style effects,
crazy Whammo effects using an expression pedal and even intelligent harmony
effects using specific scales, keys and intervals. It can be positioned pre or post
the amp effect block.
NOTE: To set up an expression pedal to use the Whammo mode: Connect an
expression pedal to expression pedal input A or B on the AmpliFire. In the editor
application click on the EDIT tab and then click on the RTN effect block. Click the
window for PARAMETER A or B depending on which expression pedal input you
used. In the window that pops up, select PSH: PEDAL.
* Why is pitch not included on the AF3? The original AF3 has a smaller code
storage space. When we designed AF6 and AF12, we upgraded several things,
including the code storage space. So, AF6 and AF12 can run additional effects like
pitch shifter, but AF3 can not. AF3 can still benefit from other updates like bug
fixes and amp models in the future, since these do not use up the same amount
of code space as new effects do.
PRESET MANAGER (Editor Only)
On the EDIT tab of the AmpliFire editor application in the lower, left corner is the
PRESET MANAGER. Clicking on this will launch the PRESET MANAGER tool. This
allows you to change the order of the presets in the AmpliFire.
Please download the updated AmpliFire manual V6.0 for instructions on how to
use these new features. Pitchshifter instructions start on page 29. Preset Manager
instructions start on page 21.

AmpliFIRE 5.0.3
Release Notes
for
AmpliFIRE, AF6 & AF12
New Features:
•Loop Mix - This parameter allows you to configure the effects loop
as series or parallel.
In series, the signal leaves the AmpliFire at the send jack, is processed
by an external effects processor and the signal is returned at the
return jack. Any wet/dry mixing must be done in the external effects
processor.
In Parallel, the signal flow inside the AmpliFire continues as normal
but the signal is also sent to the send jack to be sent to an external
effects processor. In this scenario the signal returning to the
AmpliFire return jack should be 100% wet. The Return Level
parameter is then used to mix this 100% wet signal with the internal
signal flow of the AmpliFire. If you chose to use ONLY amp and cab
modeling in the AmpliFire and use an external effects processor for
all of your other effects, the dry amp tone in the AmpliFire would
never be affected by the external effects and remain pure. Whereas
in Series, the signal must be converted from digital to analog to feed
the external effects processor. The signal is then converted to digital
again, processed and converted back to analog to return to the
AmpliFire where it is converted to digital again. Some players feel
that this process changes their guitar tone in a negative way. Using
the parallel mode avoids all of that.
•Two new reverbs have been added:
- Plate- Simulates the reverb of a steel plate reverberation system.
- Cavern-simulates the reverb of a large sized cave
- All of the reverb effects have been enhanced.
Bug Fixes:

•AmpliFire would not lock to incoming MIDI CLOCK. (fixed)
•Moving an expression pedal or turning the knobs while the AmpliFire was
booting up would crash the unit. (fixed)
•Assigning expression pedal parameters in the editor and setting the
minimum and maximum settings did not work properly. (fixed)
AmpliFIRE 4.1.2 Public Beta
Release Notes
•Volume auto swell is now a “slow gear” pedal effect with only two
parameters: “sense” and “attack”.
•Noise gate now has a global/preset select. If the “Use Global” box is
checked in on the global menu tab, per preset settings will be ignored and
global settings will override them.
•Default power “on” preset is now a global parameter. The default behavior
is that the unit will power “on” using the last preset used. Alternatively,
you can choose any preset to be your power “on” preset by selecting it’s
number in the global menu.
•Fixed a bug in the editor where footswitch assignments were always using
0-127 offset (even when set to 1-128) resulting in a potentially undesired
offset of -1 when set to 1-128 mode.
•Implemented new FX panel layouts that reorganized the order of the
parameters in a more logical and easy-to-use format.
Also, new since v4.0.0
•Fixed editor crash at startup when path contains space.
•Fixed Mac startup issue on older OS versions (editor works with OSX v1.7.5
and higher.

•Fixed editor’s maximize button behavior so the resized editor doesn’t place
the minimize button and other parameters out of reach.
•Allow editing of numeric values by double clicking on the parameter
number.
•Fix global output settings (stereo/mono bug).
•Fixed preset flash read bug that was not saving changes to presets 65-128
causing edited/saved presets and imported presets to sound
different/incorrect.
AmpliFIRE 4.0 Release Notes
•Editor reskinned for all new, much better presentation and improved
workflow (please note parameters in effect edit window will be
reorganized for ease of use in the coming weeks).
•Echo modeler overhauled
oUpdated tap function, now perfect for rhythmic and edge style
delays!
oGlobal and per preset tap tempo not sets BPM instead of delay
time directly.
oAll 4 delay taps track BPM tempo without additional adjustment.
oAdded 4 tempo mode parameters for echo taps so you can now
send each of the taps it's own musical interval 1/2 note, 1/4 note,
dotted 1/8 note. etc.
oAdded Global BPM parameter.
•Added ability to move the position of the loop to 6 key positions:
oAt Input: The EFFECTS LOOP is the first block in the signal chain
immediately following the GATE effect.
oWith Pre-FX: The EFFECTS LOOP is within the pre-fx section.
oBefore the PRE-EFFECTS section.
oBefore AMP: The EFFECTS LOOP is after the PRE-FX section and
immediately preceding the AMP block.
oWith Post-FX (DEFAULT LOCATION): The EFFECTS LOOP is after the
post-EQ and prior to the post-fx section.
oAt Output: The EFFECTS LOOP is at the end of the signal chain just
prior to the REVERB block.

•Added clean boost mode to BOOST effect block to allow you to hit the
front of an amp harder to bring on break up earlier without coloring the
tone of the overdrive.
•Added Touch Wah for intuitive Wah effect without an expression
pedal. Signals of greater amplitude (more aggressive playing) will cause
the wah to move to the toe down position and it will automatically move
back to the heel position as the signal amplitude decays.
•Added Envelope Mode in volume block to create cool auto swell effects
•Added taper control to volume block to allow adjust like your favorite
style volume pedal
•Added advanced footswitch options to easily access presets:
oBANK +10: Increment the currently selected bank by 10. After a
press, AMPLIFIRE will flash the currently selected BANK and wait
for the user to press one of the numbered switches (0-9). Times
out after 5 seconds.
oBANK -10: Decrement the currently selected bank by 10 After a
press, AMPLIFIRE will flash the currently selected BANK and wait
for the user to press one of the numbered switches (0-9). Times
out after 5 seconds.
oOFFSET 1-9: Select the preset indicated by the specified offset for
the currently selected bank For example, if you are presently in
bank 20 and specify a footswitch to an offset of 3 then pressing
that switch will select preset 23.
oOFFSET 1/6 - 5/10: Toggles back and forth between two different
offset banks of 5. For example, if you are presently in bank 20 and
specify a footswitch to the offset of 1/6 then pressing that switch
will toggle between presets 21 and 26. This lets you use one row of
5 buttons to access a bank of 10 presets.
•Display now shows footswitch function for a short time when pressed so
you can see what effect is associated with it
•Added headphones only output level mode menu which allows the
hardware level control to work on just the headphones output
•Improved expression pedal operation to fix how expression parameter
values are restored when editing presets
•Fixed rare, critical bug that caused output to become thin and shrill that
could only be fixed by a reboot

•Fixed MIDI clock bug that could cause a system freeze when hooked up to
certain controller brands using MIDI clock