CHARGING THE HEADPHONES
Battery type: Rechargeable batteries AAA
No. of cells: 2pcs
Rated capacity: 550 mAH / 10 – 12 hrs
Step 1:
Insert 2 pcs AAA size rechargeable batteries into the Battery Compartment (7) at the Left
hand side of the headphones.
Step 2:
Switch OFF (4) the headphones.
Step 3:
Connect the transmitter to a conveniently located electric wall outlet with the supplied
AC/DC Adaptor (15).
Step 4:
Insert one end of the Charging Cord (12) to the Charging Socket (6) of headphones.
The batteries should be charged for a full
12
hours. During charging process, the
Charging LED Indicator (10) will glow RED the headphone is being charged.
*** Regular (non-rechargeable type) batteries can also be used to operate this
headphone. However, you must never attempt to charge non-rechargeable batteries in
this appliance as this could prove dangerous. Only the supplied special battery can be
charged.
Step 5:
When the batteries have been charged, remember to remove the Charging Cord from the
headphones.
*** Charging procedure should never exceed 48 hours.
Caution! To avoid risk of fire or injury, do not attempt to recharge non-rechargeable
batteries.
Replace only with the same or equivalent type recommended by the manufacturer.
Please dispose of old, defective batteries in an environmentally friendly manner in
accordance with the relevant legislation
Use only the supplied adaptor. Use of other adaptor may cause damage to the unit
When not using the unit for a long period of time, remove all batteries from unit to avoid
damage or battery leakage.
Disconnect the adaptor from the wall outlet when the unit is not to be operated’
Symbol indicating separate collection for electrical and electronic equipment.
