aTTo Digital PoweREC User manual

Buttons and Functionality
User’s Manual
PoweREC Voice Recorder
POWER BUTTON RECORDER ON/OFF BUTTON
USB OUT
USB IN
MODE BUTTON
For charging mobile
devices
For changing
recording modes
Listen or download
the recordings
Charge power bank
Powering ON and OFF
the power bank
Start and stop the
recordings

How to Start and Stop Recording
To start recording, slide power button to ON position.
To stop recording, slide power button to OFF position.

Recording Modes
Recordings Playback using PC/MAC
The default recording mode is voice activated. Records only when sounds
are detected. To activate continuous recording mode, press the mode
button once.
Listen to your recordings using a windows PC or MAC. To access files,
connect included USB cable to the computer USB port. Conect the same
USB cable to the USB IN port of the recorder.
Make sure the recording button is set to OFF.

Recordings Playback using an Android Phone
How to charge the power bank
To listen to your recordings using an Android Phone, use a compatilble
OTG cable. Connect it to your phone, connect the USB cable to the OTG
and to the recorder using the USB IN port.
Make sure the recording button is set to OFF. If you made the connection
with a compactible, you should be able to see the next steps to take on
the screen, in order to access your files.
The power bank can be charged by connecting to the computer using the
USB IN port of the poweREC. It can also be charge using a USB wall socket
or phone charger.
OTG
cable
USB
cable
DO NOT use/plug in
the OTG cable like
that, because it
just won’t work

Use as Power Bank
Troubleshooting
PIN
To charge mobile devices with the poweREC, conect your device’s specific
charging cable to your device and to the poweREC using the USB OUT
port.
Never connect the OTG cable to the poweREC.
The OTG cable can only be plugged into the
micro USB port of your phone. If your phone
has a type C USB connection, use an adaptor.
Insert a pin in the reset hole to reset the
device. Keep it pressed for a few seconds.