Attwood 8314 User manual

Soft Grip
Steering Wheel
8314, 8315
Mounting Instructions
SAVE THESE INSTRUCTIONS
Form Number 69214 Rev. B 05-03
FEATURES:
This Attwood steering wheel has a high-impact, strong, one-peice
innercore, with a soft PVC outer rim, and is U.V. resistant.
Meets or exceeds NMMA and ABYC steering wheel standards.
This steering wheel fits Teleflex or Morse steering systems with
3/4" diameter tapered shafts.
Attwood marine hardware, navigation lighting, interior lighting, bilge
pumps, and other marine accessories are specified more than any
other brand by America’s best-known boat manufacturers as original
equipment. Look to Attwood for quality replacement parts and add-on
marine accessories.
© 2005 Attwood Corporation
1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com
Soft Grip
Steering Wheel
8314, 8315
Mounting Instructions
SAVE THESE INSTRUCTIONS
Form Number 69214 Rev. B 05-03
FEATURES:
This Attwood steering wheel has a high-impact, strong, one-peice
innercore, with a soft PVC outer rim, and is U.V. resistant.
Meets or exceeds NMMA and ABYC steering wheel standards.
This steering wheel fits Teleflex or Morse steering systems with
3/4" diameter tapered shafts.
Attwood marine hardware, navigation lighting, interior lighting, bilge
pumps, and other marine accessories are specified more than any
other brand by America’s best-known boat manufacturers as original
equipment. Look to Attwood for quality replacement parts and add-on
marine accessories.
© 2005 Attwood Corporation
1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com
Soft Grip
Steering Wheel
8314, 8315
Mounting Instructions
SAVE THESE INSTRUCTIONS
Form Number 69214 Rev. B 05-03
FEATURES:
This Attwood steering wheel has a high-impact, strong, one-peice
innercore, with a soft PVC outer rim, and is U.V. resistant.
Meets or exceeds NMMA and ABYC steering wheel standards.
This steering wheel fits Teleflex or Morse steering systems with
3/4" diameter tapered shafts.
Attwood marine hardware, navigation lighting, interior lighting, bilge
pumps, and other marine accessories are specified more than any
other brand by America’s best-known boat manufacturers as original
equipment. Look to Attwood for quality replacement parts and add-on
marine accessories.
© 2005 Attwood Corporation
1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com
Soft Grip
Steering Wheel
8314, 8315
Mounting Instructions
SAVE THESE INSTRUCTIONS
Form Number 69214 Rev. B 05-03
FEATURES:
This Attwood steering wheel has a high-impact, strong, one-peice
innercore, with a soft PVC outer rim, and is U.V. resistant.
Meets or exceeds NMMA and ABYC steering wheel standards.
This steering wheel fits Teleflex or Morse steering systems with
3/4" diameter tapered shafts.
Attwood marine hardware, navigation lighting, interior lighting, bilge
pumps, and other marine accessories are specified more than any
other brand by America’s best-known boat manufacturers as original
equipment. Look to Attwood for quality replacement parts and add-on
marine accessories.
© 2005 Attwood Corporation
1016 N. Monroe Street, Lowell, MI 49331-0260 www.attwoodmarine.com

TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.
TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.
TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.
TOOLS REQUIRED:
1.Suitable wrench to fit nut supplied with steering shaft.
MOUNTING INSTRUCTIONS:
1.Slide steering wheel onto steering shaft, aligning key with keyway.
2.Install locknut (supplied with steering shaft).
3.Tighten nut securely with suitable wrench.
4.Align clips on cap over slots on wheel and push cap on.
CAP
STEERING SHAFT
ATTWOOD
STEERING WHEEL
LOCKNUT
CAUTION: ALWAYS CHECK TO SEE THAT THE STEERING
WHEEL IS SECURELY MOUNTED AND IS IN GOOD WORKING
ORDER BEFORE EACH OPERATION OF THE CRAFT. IF ANY
LOOSENESS IS DETECTED, DO NOT OPERATE THE CRAFT
UNTIL CORRECTED.