Edelbrock 72552 User manual

®
Edelbrock E2 Direct Port
Nitrous Nozzle and Jet Map Information
Catalog # 72552
INSTALLATION INSTRUCTIONS
Edelbrock engineering has conducted extensive dyno testing with the Edelbrock / Glidden
E2 Direct Port Nozzle to provide jet maps and different jetting levels. The dyno testing
conducted at Edelbrock was done using Edelbrock Nitrous Components. The Edelbrock
E2 Direct Port Nozzles are compatible with most direct port nitrous systems on the
market.
The following is intended as a safe guideline for most direct port systems utilizing the
Edelbrock E2 Direct Port Nozzle with a
flowing fuel pressure of 7½ to 8 PSI and a nitrous
bottle pressure of between 950-1000 PSI. Ignition timing generally is retarded 2° for
every 50 horsepower worth of nitrous.
H.P. Gain * Nitrous Jet Fuel Jet Fuel Pressure Total Timing
200HP
300HP
400HP
500HP
26
33
39
45
25
31
35
38
7.9
7.7
7.5
7.5
28°
24°
20°
16°
Please read the Jet Map Chart carefully before attempting to use your nitrous system. Make sure to refer to your Nitrous Installation
Instructions for further information if need be. If you have any questions or problems, do not hesitate to contact our Technical Hotline
at: [phone] from 7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at: [email protected].
Fuel
Nitrous
Direct Fuel & Nitrous
Towards intake valve.
©2002 Edelbrock Corporation
Brochure No. 63-0141 Rev. 9/02
* With Eight Nozzles
®
Edelbrock E2 Direct Port
Nitrous Nozzle and Jet Map Information
Catalog # 72552
INSTALLATION INSTRUCTIONS
Edelbrock engineering has conducted extensive dyno testing with the Edelbrock / Glidden
E2 Direct Port Nozzle to provide jet maps and different jetting levels. The dyno testing
conducted at Edelbrock was done using Edelbrock Nitrous Components. The Edelbrock
E2 Direct Port Nozzles are compatible with most direct port nitrous systems on the
market.
The following is intended as a safe guideline for most direct port systems utilizing the
Edelbrock E2 Direct Port Nozzle with a
flowing fuel pressure of 7½ to 8 PSI and a nitrous
bottle pressure of between 950-1000 PSI. Ignition timing generally is retarded 2° for
every 50 horsepower worth of nitrous.
H.P. Gain * Nitrous Jet Fuel Jet Fuel Pressure Total Timing
200HP
300HP
400HP
500HP
26
33
39
45
25
31
35
38
7.9
7.7
7.5
7.5
28°
24°
20°
16°
Please read the Jet Map Chart carefully before attempting to use your nitrous system. Make sure to refer to your Nitrous Installation
Instructions for further information if need be. If you have any questions or problems, do not hesitate to contact our Technical Hotline
at: [phone] from 7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at: [email protected].
Fuel
Nitrous
Direct Fuel & Nitrous
Towards intake valve.
©2002 Edelbrock Corporation
Brochure No. 63-0141 Rev. 9/02
* With Eight Nozzles