ATWEC KVNG-2009 User manual

VOICE SPEAKER/SIREN SPECIFICATION
MOUNT: The Voice Speaker is designed to be mounted behide the
driver’s seat in most vehicles including school bus designs.
WIRING HARNESS: The wires from the Voice Speaker (VS) should
connect color for color as per diagram.
SIREN: The siren should be mounted under the hood of each vehicle
as per instruction of the diagram
WARRANTY
Under the conditions of this warranty, ATWEC will repair the control
module if found defected in material or factory workmanship for a
period of 1 year in which it is originally installed. The installation must
be performed by a certified technician for this warranty to be valid.
This warranty is offered to the original purchase and is not transferable.
This warranty will be void if the product has been abused, altered,
improperly installed or subjected to any other factor that is beyond the
manufacturer’s control. This warranty does not cover labor costs for
removal or reinstallation nor replacements costs of consumable items
such as batteries, fuses, etc.
ATWEC Technologies, Inc. 2009
ATWEC Technologies
Installation
Guide
ATWEC TECHNOLOGIES, INC.
THIS UNIT MUST BE INSTALLED BY A CERTIFIED TECHNICIAN
ATWEC TECHNOLOGIES, INC. IS NOT RESPONSIBLE FOR
ACCURACY OF APPLICATION OR INSTALLATION. PLEASE
VERIFY ALL WIRING FUNCTIONS AND CONNECTIONS
BEFORE OPERATION OF VEHICLE. PLEASE CHECK ALL
MANUFACTURER’S CAUTIONS CONCERNING AIR BAGS,
ABS SYSTEMS, ETC.
1-888-890-1543 Technical Support
ATWEC TECHNOLOGIES, INC. 2009
MADE IN THE U.S.A.

WIRING INSTRUCTIONS:------------- MODEL KVNG-2009
-------------------------------------------------
Note:
ATWEC TECHNOLOGIES, INC. IS NOT RESPONSIBLE FOR ACCURACY OF APPLICATION OR
INSTALLATION. PLEASE VERIFY ALL WIRING FUNCTIONS AND CONNECTIONS BEFORE
OPERATION OF VEHICLE. PLEASE CHECK ALL MANUFACTURER’S CAUTIONS
CONCERNING AIR BAGS, ABS SYSTEMS, ETC
(+) 12VDC
GROUND
IGNITION
VS= Voice
Speaker
Connections
G O P B
R
BLACK
RED
PURPLE
ORANGE
BLK
RED
RESET SWITCH
IGNITION HARNESS
G
REE
N
SIREN
R
B
WIRING INSTRUCTIONS:---(Continued)------------------------------------------
5 WIRE CABLE:
RED: MAIN POWER CONNECTION (Connect to the (+) 12V
battery terminal, or ignition harness.
BLACK: GROUND (Connect this wire to chassis ground.) It is of ut-
most importance that the location of this connection be as clean as
possible. Make sure the area is rust and grease free. A poor ground will
cause the unit to function improperly
PURPLE: (22ga wire) Connect this wire to the IGNITION of the
vehicle.
ORANGE: (This wire will provide a (+) 12V positive output for
powering a siren. Connect to the RED wire of siren.
GREEN: This wire provides GND when the system trips. Connect to
the Black wire of the siren.
RESET BUTTON
RED: (22ga single wire): Connect this wire to one side of reset button
BLACK: (22ga single wire): Connect this wire to the other side of
reset button