AudioCodes RXVCam50 User manual

1 |Page
RXVCam50 AI HD
Video Conference Camera
User Manual
This User Manual provides a brief introduction to the functions, installation, and operations of the
RXVCam50 AI HD Video Conference Camera.
The document describes two product flavors:
RXVCam50L. The field of view is 81 degrees (suitable for a Large room)
RXVCam50M. The field of view is 100 degrees (suitable for a Medium room)
The target environment size is the only difference between the RXVCam50L and the RXVCam50M.

2 |Page
Safety Precautions
This User Manual describes the functions,
installation, and operations related to the
RXVCam50 camera. Read the manual thoroughly
before installation and use.
How to Use
To prevent damage to this product or any
product connected to it, use it within the
specified range:
1. Do not expose the product to rain or
moisture.
2. To prevent the risk of electric shock, do not
open the case. Installation and
maintenance should only be carried out by
qualified technicians.
3. Do not use the product beyond the
specified temperature, humidity, or power
supply specifications.
4. Wipe it with a soft, dry cloth when cleaning
the camera lens. Wipe it gently with a mild
detergent if needed. To avoid scratching
the lens and affecting the image, do not use
strong or corrosive detergents.
Electric Safety
Installation and use of this product must strictly
comply with local electrical safety standards.
Handle with Care
Avoid damage to product caused by heavy
pressure, strong vibration or immersion during
transportation, storage and installation.
Install with Caution
1. Do not rotate the camera head violently
otherwise it may cause mechanical failure.
2. This product should be placed on a stable
desktop or other horizontal surface. Do not
install the product obliquely otherwise it
may display an inclined image.
3. If the camera is installed on a TV or a
computer, the base can be fixed by four
double-sided adhesive trays.
4. Housing of this product is made of organic
materials. Do not expose it to any liquid,
gas or solids which may corrode the shell.
5. Ensure there are no obstacles within
rotation range of the holder.
6. Do not power on before completing
installation.
Do not Disassemble the Product Without
Permission
This product contains no parts which can be
maintained by users themselves. Any damage
caused by dismantling the product by users
without permission is not covered by the
warranty.
Magnetic Interference
Electromagnetic fields at specific frequencies
may affect the image. This product is Class A. It
may cause radio interference for household
applications. Appropriate measures are
required.

3 |Page
Quick Installation Instructions
The figure below illustrates the camera interface.
Camera Interface
1. Camera lens
2. Indicator Light
4. Tripod fixing hole
5. Positioning hole
6. Bracket
7. USB3.0 interface
Camera Operation
1. Product Installation: Fix the device onto an LCD screen, on top of a computer; place it on a desktop, or on
a tripod mounting.
2. Connect the camera using a USB cable to a computer, a video conference terminal, or any other USB
input device. Log in to the video conference software and select a video device.

4 |Page
Product Overview
Product Model: RXVCam50
Camera Dimensions:
Accessories:
Wireless remote controller
USB3.0 Type-A to Type-B, 3-meter cable
2 * AAA batteries

5 |Page
Main Features
The camera includes integral AI functions which can automatically centrally frame all people in a meeting. It
features smooth functionality and superior performance with advanced ISP processing algorithms that
provide vivid images with evenly clear brightness, strong color layering, high resolution, and good color
rendition. The product is easy and convenient to install and maintain and is stable and reliable.
4K UHD: Employs a 1/2.5 inch, 8 million-pixel high-quality CMOS sensor; supports 4K UHD; provides 4K@
30fps MJPG video resolution maximum; and provides clear UHD video and vivid expressions and
movements. At the same time, it’s compatible with 1080p and 720p resolution.
ePTZ:ePTZ and 4x digital zoom
Dual stream output: The USB3.0 port supports simultaneous main stream and sub-stream output.
Auto framing: Includes an excellent facial detection algorithm which automatically adjusts the zoom
according to the number of people in the meeting. It can frame all the people in the meeting and display
them in the middle of the scene.
Wide view angle without distortion:
RXVCam50L. The field of view is 81 degrees (suitable for a Large room)
RXVCam50M. The field of view is 100 degrees (suitable for a Medium room)
Multiple Installations: Standard equipped with a mold clamp. Easy to install on any device, be it LCD
screen, PC, table, or tripod.
Easy to Use: No need to download a driver; USB plug and play.
Wide Applications: Personal video conferencing, enterprise video conferencing, Unified Collaboration
(UC), etc.

6 |Page
Specifications
Parameter RXVCam50L RXVCam50M
Camera
Image Sensor 1/2.5-inch high-quality 4K CMOS Sensor
Effective Pixels 8.28MP 16:9
Video output
port
1* USB3.0, Type B, supports audio output over USB3.0
View Angle 91°(D) / 81°(H) / 54°(V) 102°(D)/100°(H)/64°(V)
Video Format Main stream: 3840×2160@30fps、1920×1080P@30fps/25fps、
1280×720P@30fps/25fps, etc.
Sub-stream:1280×720P@30fps/25fps; 640×480P@30fps/25fps;
320×172P@30fps/25fps, etc.
Min
Illumination
0.1Lux (F1.8, AGC ON)
Lens f=3.24mm f=2.26mm
Aperture F2.1 F1.8
Digital zoom 4X
Ultra-low
illumination
On/Off
White Balance Auto / Manual/ One Push/ 3000K/ 3500K/ 4000K/ 4500K/ 5000K/ 5500K/ 6000K/
6500K/ 7000K
Focus Auto / Manual
Exposure Auto / Manual
Auto framing On/Off/Sensitivity
Backlight
compensation
On/Off
Dual stream On/Off
USB Feature
Operation
Systems
Windows 7 (1080p maximum), Windows 8.1, Windows 10; macOS™ 10.10 or higher,
Linux (required for UVC support)
Video
Compression
format
YUY2, NV12, MJPG, H.264

7 |Page
Parameter RXVCam50L RXVCam50M
USB
communication
protocol
UVC, UAC
PTZ control Supports EPTZ
Hardware
requirement
2.4 GHz Intel@ Core 2 Duo processor or higher
2GB RAM or more USB 2.0/USB3.0 port (USB 3.0 is needed for 4K video)
Other Parameters
Input Voltage 5V
Input Current 1A (max.)
Power
consumption
5W (max.)
Store
Temperature
-10℃～+60℃
Store Humidity 20%～90%
Working
Temperature
-10℃～+50℃
Working
Humidity
20%～80%
Dimension (W*H*D）180mm×42.5mm×46.3mm
Weight Approximately 0.23 kg
Application Indoor
Accessory Wireless Remote Controller
USB3.0 Type-A to Type-B 3-meter cable
2 * AAA batteries

8 |Page
Interface
External Interface
The figure below shows the external interface connections.
Interface Diagram

9 |Page
Application
Wireless Remote Controller
Keys Instructions
1. SET: Use in combination with other keys to
confirm actions).
2. Standby:Press for the device to enter standby
mode; press again for the device to redisplay
the picture.
3. CAMERA SELECT:Select the camera to
control.
4. Number keys: Set or call 0-9 presets.
5. FOCUS (unsupported)
+Focus in
-Focus out
6. AUTO (unsupported)
7. MANUAL (unsupported)
8. ZOOM
Press + to zoom in
Press – to zoom out
9. SET PRESET | CLEAR PRESET
Set Preset: Press and then press a
number key (0-9) to set a position.
Note that 10 presets can be set using
the RC.
Clear Preset: Press and then press the
number key (0-9) to clear a preset.
To clear all presets: Press the #key
three consecutive times (see Key
Combinations below for other possible
key combinations)
10. Pan/Tilt
Up: Long-press ↑; release to stop
Down: Long-press ↓; release to stop
Left: Long-press ←; release to stop
Right: Long-press →; release to stop
HOME: Press for the camera lens to
return to the middle position, or to
enter the next menu.
11. BLC ON/OFF:Press to switch the back light
compensation on or off.
12. MENU
Press to open or close the On-Screen
Display (OSD) menu or return to the
previousmenu.

10 |Page
13. Setting Camera Address
F1, F2, F3, F4. Press the following
sequence to set an address:
Press * + #+ F1 to set Camera Address 1
Press * + #+ F2 to set Camera Address 2
Press * + #+ F3 to set Camera Address 3
Press * + #+ F4 to set Camera Address 4
Key Combinations
Press # + #+ #to clear all presets
Press * + #+ 6 to restore defaults
Press * + #+ 9to flip switch
Basic Operations
Pairing the RC with the Camera
1. Connect the camera to the PC using a USB3.0
Type-A to Type-B cable.
2. On the Remote control (RC), long-press the
SET and *keys simultaneously for three
seconds; the LED indicator on the RC starts
flashing.
3. Release the SET and *keys.
4. Unplug the USB cable from the camera for
one second and then plug it back in; the LED
indicator on the RC turns off.
Pairing has successfully completed.

11 |Page
Menu Setting
To display the menu, press the MENU key under
MJPG, YUY2, NV12 or H264 compression encoding
format output. Use the scroll arrow to point at or
highlight the selected item.
Setup Settings
In the MENU settings, move the pointer to Setup,
press the HOME key and enter into the setup
settings:
image style:Default, Normal, Clarity, Bright,
Soft
USB Mode: BULK, ISOC
Auto Framing
In the setup menu, move the pointer to (Auto
Framing), press the HOME key and enter the Auto
Framing settings:
Auto Framing:close / open
Sensitivity: 0~2 (only in open mode)
Exposure Settings
In the MENU settings, move the pointer to
(Exposure), press the HOME key and enter the
EXPOSURE settings:

12 |Page
Mode: Auto, Manual, SAE, Bright
EV: On/Off (available in Auto mode only)
BLC:ON/OFF for options (available in Auto
mode only).
Flicker:OFF/50Hz/60Hz for options (available
in Auto / SAE / Bright modes only)
Gain Limit: 0~15 (available in Auto / Bright
modes only)
DRC:Close,1~8 (available in Auto / Bright
modes only)
Shutter:
1/30,1/50,1/60,1/90,1/100,1/120,1/180,1/250,1
/350,1/500,1/1000,1/2000,1/3000,1/4000,
1/6000, 1/10000 (available in Manual /SAE
modes only)
Again: 0~15 (only available in manual/SAE
mode)
Color Settings
In the MENU settings, move the pointer to
(Color), press the HOME key and enter the COLOR
settings:
WB Mode:Auto, Manual, OnePush, VAR
RG Tuning:-10~10 (available only in Auto and
Manual modes)
BG Tuning:-10~10 (available only in Auto and
Manual mode)
Saturation:0~50
Hue: 0~8
AWB Sensitivity:High/Middle/Low (available
in Auto mode only)
Color Temp:2400k-7100k (available in VAR mode
only)
Image Settings
In the MENU settings, move the pointer to
(Image), press the HOME key and enter the
IMAGE settings:
Brightness: 0~100
Contrast: 0~100
Sharpness: 0~15
Flip-H: On/Off
Flip-V: On/Off
B&W Mode: Color, B&W
Gamma: 0.34, 0.39, 0.47,0.50, default
Low-Light Mode: Close, Open

13 |Page
Noise Reduction Settings
In the MENU settings, move the pointer to (Noise
Reduction), press the HOME key and enter the
NOISE REDUCTION settings:
NR (Noise Reduction)-2D:off, 1~7
NR (Noise Reduction)- 3D: off, 1~8
Version
In the MENU settings, move the pointer to
(Version). This field displays the current software
version. It’s read-only.
Restore Default
In the MENU settings, move the pointer to
(Restore Default), press the HOME key and enter
the RESTORE DEFAULT settings.
Press the ← → key to set YES/NO and then press
HOME to confirm the selection.
Note: The video format and color style cannot be
restored to factory defaults.

14 |Page
Maintenance and
Troubleshooting
This section shows how to maintain and
troubleshoot the device.
Maintenance
1. Disconnect the camera if it has not been in
use for a long time.
2. Use soft cloth or tissue to clean the camera
cover.
3. Wipe the camera lens with a soft, dry cloth
when cleaning. Wipe it gently with a mild
detergent if required. Do not use strong or
corrosive detergents to avoid scratching the
lens and affecting the image.
Troubleshooting
No Video Output
1. Check whether the USB cable is securely
connected and that the power indicator light
is ON.
2. Check whether the camera can perform a self-
check after it has restarted.
3. Restart the PC.
4. Check whether the camera is successfully
recognized by your PC.
Sometimes an Image is not
Displayed
Check the USB cable quality and whether it is
securely connected.
Image Dithering when Zooming-in
or Zooming-out
Check whether the camera installation
position is stable.
Remote Controller does not work
1. Set the camera address to 1(the camera
address is restored to 1after restoring default
settings).
2. Repeat the pairing procedure between the
Wireless Remote Controller and the camera.
3. Replace the AAA batteries.

15 |Page
Obtaining
Documentation and
Software
If you have a maintenance and support
agreement with AudioCodes, you can download
the device's latest software version from
AudioCodes' Services Portal at
https://services.audiocodes.com (registered users
only).
Customer Support
Customer technical support and services are
provided by AudioCodes or by an authorized
AudioCodes Service Partner. For more
information on how to buy technical support for
AudioCodes products and for contact information,
please visit our website at
https://www.audiocodes.com/services-
support/maintenance-and-support.
Copyright Statement
All the contents in this manual and its copyright
are owned by the company. No one is allowed to
imitate, copy, or translate this manual without the
company’s permission. This manual contains no
guarantee, standpoint expression or other implies
in any form. Product specification and information
in this manual is for reference only and subject to
change without notice.
All rights reserved. No reproducing is allowed
without acknowledgement.
About AudioCodes
AudioCodes Ltd. (NasdaqGS: AUDC) is a leading
vendor of advanced voice networking and media
processing solutions for the digital workplace.
with a commitment to the human voice deeply
embedded in its DNA, AudioCodes enables
enterprises and service providers to build and
operate all-IP voice networks for unified
communications, contact centers and hosted
business services. AudioCodes’ wide range of
innovative products, solutions and services are
used by large multinational enterprises and
leading tier one operators worldwide.
International
Headquarters
1 Hayarden Street,
Airport City
Lod 7019900, Israel
Tel: [phone]
Fax: [phone]
AudioCodes Inc.
200 Cottontail Lane,
Suite A101E,
Somerset, NJ 08873
Tel: [phone]
Fax: [phone]
Contact us:
https://www.audiocodes.com/corporate/offices-
worldwide
Website: https://www.audiocodes.com/
©2021 AudioCodes Ltd. All rights reserved. AudioCodes, AC,
HD VoIP, HD VoIP Sounds Better, IPmedia, Mediant,
MediaPack, What’s Inside Matters, OSN, SmartTAP, User
Management Pack, VMAS, VoIPerfect, VoIPerfectHD, Your
Gateway To VoIP, 3GX, VocaNom, AudioCodes One Voice,
AudioCodes Meeting Insights, AudioCodes Room Experience
and CloudBond are trademarks or registered trademarks of
AudioCodes Limited. All other products or trademarks are
property of their respective owners. Product specifications are
subject to change without notice
Document #: LTRT-18152
Date Published: 12/07/2021