Audiolab DC BLOCK User manual

User Manual
DC BLOCK

audiolab DC Block
Mains Conditioner (DC+RF filter)
Important Safety
Information Warranty Coverage
1: Important Safety Information Page 2
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding plug has
two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
Unplug this apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
CAUTION: These servicing instructions are for use by qualifled service personnel
only. To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
Do not install this equipment in a confined or built-in space such as a bookcase or
similar unit, and keep well ventilated in open space. The ventilation should not be
impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains etc.
WARNING: Only use attachments/accessories specified or provided by the
manufacturer (such as the exclusive supply adapter).
WARNING: Please refer to the information on the exterior panel of the enclosure
for electrical and safety information before installing or operating the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture. The apparatus shall not be exposed to dripping or splashing
and that objects filled with liquids, such as vases, shall not be placed on apparatus.
WARNING: For the terminals marked with symbol of " " the voltage may be of
sufficient magnitude to constitute a risk of electric shock. The external wiring
connected to the terminals requires installation by a qualified person or the use of
ready-made leads or cords.
The product is designed to use in moderate/tropical climates.
Mains Supply: The mains operating voltage of Audiolab DC BLOCKER is shown on
the rear panel. If this voltage does not match the mains voltage in your area, consult
your Audiolab dealer about converting the unit.
The mains supply fuse on the rear panel is accessible when the iEC mains plug has
been removed. In the rare event that it has broken, check for any obvious cause
before replacing the fuse with one of the correct rating and type.
The fuse values are: 100-240V T4AL Slow Blow
This equipment is a Class II or double insulated electrical appliance. It has
been designed in such a way that it does not require a safety connection
to electrical earth.

audiolab DC Block
Mains Conditioner (DC+RF filter)
Important Safety
Information Warranty Coverage
Quick Instruction Guide
Functions：
2. Blocks DC on the mainspower line.
Unpacking:
Unpack the product fully, the carton should contain:
• The audiolab DC BLOCK
One IEC mains power cord suitable for your area
One IEC C14 to C13 jumper cord
•
•
2: audiolab DC Block - Mains Conditioner (DC+RF filter)Page 3
Specifications:
Power Requirement:
*Peak Load:
100-240V~ 50-60Hz
600VA
< 2x150W or< 1x300W
113 x 59 x 140 (mm)
0.7kg
If an item is missing ordamaged report this to yourdealer as soon as possible.
Retain the packing for safe transport of yourunit. If you dispose of the packing,
do so with regard to any recycling regulation in your area.
Connection:
before the operationsbelow.
Dimensions (W x H x D):
Weight(net):
*Note
Connect the supplied jumper cord from the output of DC BLOCK to the unit
Connect the supplied mains power cord from the input of DC BLOCK to the
AC supply outlet
(1)
(2)
(1)
(2)
:
The DC BLOCK is designed for audio equipment with variable power requirements
up to maximum peak load, and should not feed any permanent high power loads
such as heaters or similar.

audiolab DC Block
Mains Conditioner (DC+RF filter)
Important Safety
Information Warranty Coverage
3: Warranty Coverage Page 4

audiolab DC Block
Mains Conditioner (DC+RF filter)
Important Safety
Information Warranty Coverage
3: Warranty Coverage Page 5
Should a fault occur with your product, please pack it correctly using the original
packing, so you can ship it safely. For technical support, servicing or product
queries and information, please contact either your local retailer or the office
below:

Corrent disposal of this product. This marking indicates that this product should not be
disposed with other household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it responsible to
promote the sustainable reuse of material resources. To return your used device, please use
the return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.

Audiolab
IAG House,
13 /14 Glebe Road,
Huntingdon,
Cambridgeshire,
PE29 7DL,
UK
Tel: [phone]
Email: [email protected]
http://www.audiolab.co.uk
CODE: AH14-MNL0004a