AudioSource AMP 310 User guide

AMPLIFIER APPLICATION GUIDE
AMP 100
AMP 102
AMP 110
AMP 210
AMP 310

Amplifier Guide
AudioSource AMP series amplifiers are designed for home and commercial
audio distribution systems where high quality sound, flexibility, and reliability are
essential. The AMP series offers exceptional value and many features that will
make their installation and use easy and convenient.
The AudioSource AMP series consists of 5 amplifier models ranging from 50
watts per channel to 150 watts. The amplifiers share some common features with
intelligent industrial design, superior engineering and value as key components
to the AMP series success story.
AMP Series Products….. Value Priced Engineering Excellence!
All models incorporate the following features:
1. Bridgeable Outputs
2. Dual Stereo Inputs
3. Priority Input Switching (Automatic)
4. Heavy Duty Aluminum Faceplates
5. Stereo Line Outputs
6. Separate Volume and Balance Controls
7. 5-Way Binding Posts
8. A and B Speaker Selector Switches
9. Auto On (By-passable)
Amplifier Technology
The AMP 110, AMP 210, and AMP 310 incorporate very precise
circuit topology to ensure the best audio reproduction. Dual Differential Error
amplifiers ensure linearity and low noise operation. Triple Darlington output
stages ensure the amplifier can drive complex speaker loads without adding
distortion. In addition, toroidal power transformers are used with large filter
capacitors to create stunning audio dynamics.
Careful Engineering
When discussing AMP series products with your contractors it’s important to note
that the entire AMP series went through rigorous testing procedures in Portland,
Oregon by AudioSource’s engineering staff. Years of audio engineering
experience have been applied to these amplifiers to ensure years of use.
AMP100 AMP102 AMP110 AMP210 AMP310
Number of
Channels 2 2 2 2 2
Load
Impedance 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm 8ohm 4ohm
Rated Output
Power 50 60 50 75 75 110 90 125 150 225
Frequency
Response 20-20kHz 20-50kHz 20-50kHz 20-50kHz 20-50kHz
Signal to
Noise Ratio 100dB 100dB 100dB 100dB 100dB
Input
Sensitivity 1.5Vrms 350mV-
2.8Vrms 350mV- 2.8Vrms 350mV- 2.8Vrms 350mV- 2.8Vrms
THD at Rated
Power <.2% <.1% <.1% <.1% <.1%
Dimensions 2.9"H x 16.5"W x
9.25"D 3.8"H x 16.5"W x 8.25"D 3.8"H x 16.5"W
x 13.75"D 3.8"H x 16.5"W x
13.75"D 5.5"H x 16.5"W x 13.75"D
Weight 12 lbs 14.7 lbs 23.1 lbs 24 lbs 33.1 lbs

AMP 100
Applications:
Ideal for use as a remote amplifier
Use with Whole House Distributed Audio Systems
Second Zone Amplifier
Amplify MP3 Players
Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems
Perfect for Computers and Video Games
Key Features:
Affordable!
2 Independent channels rated at 50 watts into 8 ohms
60 watts per channel into 4 ohms
Independent level and balance control
Dual Auto-Switching Inputs
Auto Signal Sensing Power On
A/B Speaker selector
Bridgeable
Specifications
Power: 50 watts RMS @ 8 ohms
60 watts @ 4 ohms
Less than 0.2% THD into 8 ohms
Input Sensitivity 1.5 Vrms
S/N Ratio: 100 dB A-weighted
Frequency response: 20Hz to 20kHz

AMP 102
Applications:
Ideal for use as a Remote Amplifier
Use with Whole House Distributed Audio Systems
Second Zone Amplifier
Amplify MP3 Players
Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems
Perfect for Computers and Video Games
Ideal for In-Wall and In-Ceiling Speaker Systems
Key Features:
Even More Affordable Power!
2 Independent channels rated at 50 watts into 8 ohms
75 watts per channel into 4 ohms
Independent level and balance control
Dual Auto-Switching Inputs
Auto Signal Sensing Power On
A/B Speaker selector
Front Panel diagnostic LEDs
Bridgeable
12VDC “Trigger On”
Rack-mount ready
Specifications
Power: 50 watts RMS @ 8 ohms
75 watts @ 4 ohms
Less than 0.1% THD into 8 ohms
Input Sensitivity: 350mV to 2.8Vrms
S/N Ratio: 100 dB A-weighted
Frequency response: 20Hz to 50kHz

AMP 110
Applications:
Ideal for use as a Remote Amplifier
Use with Whole House Distributed Audio Systems
Second Zone Amplifier
Amplify MP3 Players
Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems
Perfect for Computers and Video Games
Ideal for In-Wall and In-Ceiling Speaker Systems
Key Features:
2 Independent channels rated at 75 watts into 8 ohms
Line 1/ Line 2 Priority input switching
Line 2 Auxiliary output
Front panel diagnostic LEDs
Signal sensing “Power On”
Bridgeable
12VDC “Trigger On”
Speaker A/B Switching
Triple-Darlington Power Amplifier Stages
Dual-differential error amplifiers
Rack-mount ready
Specifications
Power: 75 watts RMS @ 8 ohms
110 watts @ 4 ohms
225 watts @ 8 ohms bridged
Less than 0.1% THD into 8 ohms
Input Sensitivity 350mV to 2.8Vrms
S/N Ratio: 100 dB A-weighted
Frequency response: 20Hz to 50kHz

AMP 210
Applications:
• Ideal for use as a remote amplifier
• Single or Dual Zone Amplifier
• Amplify MP3 Players
• Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems
• Excellent Stand-Alone Stereo Amplifier
Key Features:
•Incredible Value!
• 2 Independent channels rated at 90 watts into 8 ohms
• Line 1/ Line 2 Priority input switching
• Line 2 Auxiliary output
• Front panel diagnostic LEDs
• Front panel balance and volume trim controls
• Independent rear left/right master level controls
• Signal sensing “Power On”
• Bridgeable
• 12VDC “Trigger On”
• Speaker A/B switching
• High level inputs
• Triple-Darlington Power Amplifier Stages
• Dual-differential error amplifiers
• Rack-mount ready
Specifications
• Power: 90 watts RMS @ 8 ohms
• 125 watts @ 4 ohms
• 250 watts @ 8 ohms bridged
• Less than 0.1% THD into 8 ohms
• Input Sensitivity 350mV to 2.8Vrms
• S/N Ratio: 100 dB A-weighted
• Frequency response: 20Hz to 50kHz

AMP 310
Applications:
• Ideal for use as a remote amplifier
• Single or Dual Zone Amplifier
• Amplify MP3 Players (With Authority!)
• Rear Channel Amplifier for Dolby 6.1 and 7.1 Systems
• Excellent Stand-Alone Stereo Amplifier
Key Features:
• Massive Flexible Power!
• 2 Independent channels rated at 150 watts into 8 ohms
• Line 1/ Line 2 Priority input switching
• Line 2 Auxiliary output
• Front panel diagnostic LEDs
• Front panel balance and volume trim controls
• Independent rear left/right master level controls
• Signal sensing “Power On”
• Bridgeable
• 12VDC “Trigger On”
• Speaker A/B switching
• High level inputs
• Triple-Darlington Power Amplifier Stages
• Dual-differential error amplifiers
• Rack-mount ready
Specifications
• Power: 150 watts RMS @ 8 ohms
• 225 watts @ 4 ohms
• 450 watts @ 8 ohms bridged
• Less than 0.1% THD into 8 ohms
• Input Sensitivity 350mV to 2.8Vrms
• S/N Ratio: 100 dB A-weighted
• Frequency response: 20Hz to 50kHz

What products go with the AudioSource AMP Series?
Any Program Source or Speaker You Want to Attain Peak Performance With!
The most exciting feature of the AMP series is the flexibility these products have
to connect into any audio system: new or already installed, large or small, high-tech
or traditional. This versatility comes from the expansive feature set built into all
the AudioSource AMP products. Connect to other AudioSource products, such as
the EQ 200, or powered subwoofers PSW 110 and PSW 112. Or connect to any
receiver, MP3 player, TV, PC, Satellite Radio, Tape Deck, Phono... or any other source.
1. Use the High Level (Speaker Level) inputs on the AMP210/AMP310 to
upgrade a zone that has speakers installed already
2. Save energy costs with the Auto-on or 12V Trigger-On feature
3. Add the ultimate gaming experience to a room using the auto-override
feature of the AMP series by plugging in the audio out jack of any
gaming console to the Line 1 inputs.
4. Add an MP3 player to a distributed audio system that automatically
interrupts the regular program material just by pushing “Play”
5. A powered subwoofer connects to the AMP by plugging the Line 2 output
of the amplifier, or amplified speaker outputs to the subwoofer.
These are all easily planned upgrades that will keep your customers coming back
for future upgrades and more audio excitement.
AMP Series…Let’s Look at Some More Applications
The timer available on the
AMP 210/310 provides
maximum flexibility, no matter
what the job
The timer available on the
AMP 210/310 provides
maximum flexibility, no matter
what the job
Line 1 IN: Use as a
secondary input. Will
override Line 2 IN
when signal present
Adjustable delay between Line 1 IN
shut off and Line 2 IN turn on
(3 to15 seconds)
AMP Features Provide Endless
Connection Options
Line 2 IN: Always use
as primary input
Using the
speaker level inputs on the
subwoofer it will operate for
either Line 1 IN or Line 2 IN
sources.

Applications at a Glance…
1) Easily add excellent TV sound
2) Plan future upgrades with amplifier Zone B output
Line 2 IN
(Primary Input) Line 2 OUT (Auxiliary Output)
Amplifier
AMP 100
AMP 102
AMP 110
AMP 210
AMP 310
In-Wall Speakers*
AC5W
AC6W
AC8W
AC515W
AE5S
AE6S
AE8S
AE515
*or use any pair of 4-8 Ohm speakers
Powered Subwoofer
PSW 110
PSW 112
Source:
Cable Box
Digital Antenna
Surround Receiver
or TV Audio Outputs
Audio Line OUT from TV
The TV sound package provides excellent audio reproduction where television speakers
fall short. For customers who don’t need a full surround sound home theater but aren’t
satisfied with the sound coming from their new flat screen TV.

Applications at a Glance…
1) Easily add excellent TV sound
2) Plan future upgrades with amplifier Zone B output
Whole house distributed audio is a snap with the added power of AudioSource AMP Series
power amplifiers. Just add a selector and/or some impedance matching volume controls and
connect to all the desired audio zones you want!
Line 2 IN
(Primary Input)
Audio Out
Amplifier
AMP 100
AMP 102
AMP 110
AMP 210
AMP 310
Source:
Receiver
MP3
CD
PC
Satellite Radio
Amplifier Zone A Output
to Speaker Selector
AE4SW-AE6SW
ZONE 1 - 6
Output to Volume Controls
DUAL MONO SPEAKER ZONES
Kitchen
Bathroom
Hallway
Entry
Master Closet
Laundry Room
Pantry
Dual Mono Speaker Models:
AC6CD
AC8CD
STEREO CEILING
SPEAKER ZONES
Bedrooms
Living Room
Dining Room
Study
Kitchen
Garage
IMPEDANCE MATCHING
VOLUME CONTROLS
Models:
AE100VC
VMT-100
Ceiling Speaker Models:
AC5C
AC6C
AC8C
AE5C
AE6C
AE8C
1) Connect any source, including whole house systems
2) Scale to any number of zones by adding another amp (Line 2 OUT), or another
speaker selector (ZONE B OUT).

AMP Series Products….. Value Priced Engineering Excellence!
Powerful, Flexible, Reliable.
All You Need to Bring Complete Satisfaction to Your Customer.
Flexibility by Design!
Power
Signal / Clip
Left Signal / Clip Right
Left Right
-12dB +6dB
Balance Trim Volume Trim
Speakers
A B
AMP210
Stereo Power Amplifier
1. Power
The front panel power switch switches the AMP210/310 on or off.
2. Speaker Zone Selector
Selects active speaker output ( A or B )
3. Balance Trim
Fades speaker output between the Right and Left Channels
4. Volume Trim
Allows fine adjustment of amplifier volume.
FRONT PANEL CONTROLS
6. Line 1 Input
A switching input that can be used if a second source is desired. Will
take over when a signal is present. When there is no signal at this
input the amplifier switches back to the Line 2 or “primary” input.
7. Speaker Level Input Line Select
Switches the input of the speaker level input to Line 1 or Line 2.
8. Speaker Level Input
Can be used to connect a source with speaker level output instead of line
level outputs.
9. Line 2 Input/Output
The primary line level input and output for a single source connection.
10. Delay Time
Allows for a 3-15 second delay to be set and accommodate the source
connected to the Line 1 input.
11. Master Level Controls
Provides independent adjustment of Left and Right channel maximum
level.
12. Mode Select Switch
Switches the amplifier from Stereo mode to Bridged Mono mode
13. 12V Trigger
Allows the amplifier to be powered on by other electronics or to power
on other electronics via a 3.5mm mini phone plug cable.
14. Power Mode
Set it to Normal for manual power on/off. Set to Auto-On for signal sensing.
Set to Trigger when using 12V trigger for on/off.
15. Right Channel Speaker Output
Right channel terminals for speaker outputs A and B.
16. Left Channel Speaker Output
Left channel terminals for speaker outputs A and B.
17. Mains Power Inlet & Fuse Holder
Accepts IEC type line cord. A fuse located in integrated holder provides
safety protection from fault conditions: replace fuse with one of same type
and rating only.
18. Mains Voltage Selector
Voltage selection switch is preset to 115V (USA). For use in areas which
require 230V contact your dealer. Fuse must be of type and rating marked
on amplifier for use at local mains voltage.
REAR PANEL CONTROLS
4
3
21
6
7
89 10 11 12 13 14 15 16 17
18
55
5. Clip LEDs
Blinks red during signal clipping. Reduce volume slightly.
-
IN
L
L
R
L
R
R
Speaker IN
IN OUT
Line 1 Line 2
Line 1 Line 2
+ +
- -
V
V
Serial Number:
IN OUT
Delay
Time
3 Sec 15 Sec
Master Level
Min Max Min Max
Mode
Stereo Bridged
12V Trigger
+
Trigger Normal
Auto On
LR
Use Class 2 Wiring
Minimum Impedance:
8 ohm Bridged
4 ohm Stereo
AVIS: RISQUE DE CHOC ELECTRIQE
NE PAS OUVRIR CE CARTER
RESERVE AU PERSONNEL AUTORISE
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
WARNING: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
CAUTION AVIS Speaker A
R L
RL
-
-
- + +
+
-- + +
Bridge
Speaker B
115V~ 60Hz 700W
FUSE:T6.3AL 250V
FUSE:T3.15AL 250V
230V~ 50Hz 700W
MODEL AMP210
Custom Manufactured in China
CAUTION: See User Manual Before
Replacing Fuse
On Off
Light Bar Display
19
19. Light Bar Display Control
Turns light bar display on front panel on or off. Does not control Signal/Clip
LEDs or power button light ring.

HERE AT AudioSource, we understand the power and importance of sound. That’s why we’ve been connecting
people to it for over 20 years. By powering, connecting and projecting its flow, we feel we have a responsibility:
to create the best in sound quality. In this pursuit, we make no compromises. Our functional designs improve
performance, and through expert and efficient engineering, we ultimately produce higher quality products at
a gre at val u e.
We know not everyone will notice, but to those who understand and appreciate the small elements that
make a difference in the flow of sound, we believe AudioSource’s products stand alone.
HEARD NOT SEEN
WATTS PER CHANNELMODEL FEATURES AT A GLANCE
Stereo
8 Ω
Stereo
4 Ω
Bridged
8 Ω Channels Inputs
Priority
Input
Switching
A/B
Speaker
Selection
Auto-
On
12v
Trigger
Rack
Mount
Ready
High
Level
Inputs
AMP 100 50 60 160 2 2
AMP 102 50 75 150 2 2
AMP 110 75 110 225 2 2
AMP 210 90 125 250 2 2
AMP 310 150 225 450 2 2
See all of our products
at
www.audiosource.net