Audiovox FLO TV User manual

Quick Start Guide

Please refer to the following quick start guide as an
overview to use the
FLO TV ™ service:
1. Turn the vehicle ignition key to the ON
position. Turn on your Vehicle Entertainment
System (VES) and select the source input to
which the
FLO TV service is connected. (Note:
Watching the
FLO TV service for an extended
period of time with the engine OFF will run
down the vehicle’s battery.)
2. The VES screen will show the FLO TV splash
screen and then the FLO TV preview channel.
3. If you are not subscribed, subscribe to the
FLO
TV
service by calling 888-99-FLOTV or by
going online to www.flotv.com. The Device ID
and Authorization Code of the FLO TV module
are required for subscription. Press the
(Settings) key on the remote to access the
Settings Menu. Press the ▼(down arrow) key to
highlight Subscription Information and press
the (OK) key on the remote. Your Device ID

and Authorization Code will be displayed on
the VES screen.
4. Once subscribed to the
FLO TV service, press
the (Guide) key on the remote to access the
FLO TV Channel Guide.
5. Press the ▲(up arrow) or ▼(down arrow) key
on the remote to change channels.
6. The arrow keys on the remote allow for
navigation through the Channel Guide.
7. Press the (OK) key on the remote to select a
desired channel/show from the Channel Guide.
8. Press the (Information) key on the remote to
display the program information related to the
current program.
9. Press the (Settings) key on the remote to
access the FLO TV user settings menu (e.g.
Parental Control, etc.).
10. The (Mode) key on the remote allows the
user to switch between the
FLO TV service and
an auxiliary A/V source if one is connected.
11. Visit www.flotv.com for more info.

Copyright © 2010 Audiovox Corporation
1.26.2010 128-8714A