Audiovox Rampage ACD-28A Programming manual

ACD-28AACD-28A
ACD-28AACD-28A
ACD-28A
AM/FM/MPX RADIO
WITH DETACHABLE FRONT PANEL
COMPACT DISC PLAYER,
CD CHANGER CONTROLS AND QUARTZ CLOCK
OO
OO
OWNER'S MANUWNER'S MANU
WNER'S MANUWNER'S MANU
WNER'S MANUALAL
ALAL
AL
AND INSTAND INST
AND INSTAND INST
AND INSTALLAALLA
ALLAALLA
ALLATION GUIDETION GUIDE
TION GUIDETION GUIDE
TION GUIDE
CAR COMPACT DISC PLAYER/RECEIVER SUB
A

22
22
2
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONSINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS
This unit is designed for installation in cars, trucks, and vans with an existing radio opening. In many cases, a special
installation kit will be required to mount the radio to the dashboard. These kits are available at electronics supply
stores and car stereo specialist shops. Always check the kit application before purchasing to make sure the kit
works with your vehicle. If you need a kit but cannot find it available, call our toll-free “HELP” line at
1-800-645-4994.
UNIVERSALINSTALLATIONPROCEDUREUSINGMOUNTINGSLEEVE
1. Removethedetachablefrontpanelifitisattachedtothechassis bypushingthe “Release”button.Slide themount-
ing sleeve off of the chassis. If it is locked into position, use the removal tools (supplied) to disengage it.
2.Checkthedashboardopeningsizebyslidingthemountingsleeveintoit.Iftheopeningisnotlargeenough,carefully
cut or file as necessary until the sleeve easily slides into the opening. Do not force the sleeve into the open-
ingorcause it to bend or bow. Checkthatthere will be sufficient space behind thedashboardfor the radio chassis.
3. Locate the series of bend tabs along the top, bottom, and sides of the mounting sleeve. With the sleeve fully
inserted into the dashboard opening, bend as many of the tabs outward as necessary so that the sleeve is
firmly secured to the dashboard.
4. Place the radio in front of the dashboard opening so that the wiring can be brought through the mounting sleeve.
Follow the wiring diagram carefully and make certain all connections of the wiring harness are secure and
insulated with wire nuts or electrical tape to insure proper operation of the unit. After completing the wiring
connections, attach the front panel and turn the unit on to confirm operation (ignition switch must be “on”).
If unit does not operate, recheck all wiring until problem is corrected. Once proper operation is achieved, turn
off the ignition switch and proceed with final mounting of the chassis.
5. Carefully slide the radio into the mounting sleeve making sure it is right-side-up until it is fully seated and the
spring clips lock it into place.
6. Attach one end of the perforated support strap (supplied) to the screw stud on the rear of the chassis using
the hex nut provided. Fasten the other end of the perforated strap to a secure part of the dashboard either
above or below the radio using the screw and hex nut provided. Bend the strap to position it as necessary.
CAUTION: The rear of the radio must be supported with the strap to prevent damage to the dashboard from
the weight of the radio or improper operation due to vibration.
7. Re-attach the front panel to the chassis and test radio operation by referring to the Operating Instructions for
the unit.
INSTALLATIONUSINGKITS
1. If your vehicle requires the use of an installation kit to mount this radio, follow the instructions included with
the installation kit to attach the radio to the mounting plate supplied with the kit.
2. Wire and test the radio as described in Step 4 above.
3. Install the radio/mounting plate assembly to the sub-dashboard according to the instructions of the installation kit.
4. Attach the support strap to the radio and dashboard as described in Step 6 above.
5. Replace the dashboard trim panel.
INSTINST INSTINST
INSTALLALL
ALLALL
ALLAA
AA
ATT
TT
TION INSTRUCION INSTRUC
ION INSTRUCION INSTRUC
ION INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS
ISOINSTALLATIONPROCEDURE
This unit has threaded holes in the chassis side panels which may be used with the original factory mounting brackets
of some Toyota, Nissan, Mitsubishi, Isuzu, Hyundai and Honda vehicles to mount the radio to the dashboard. Please
consult with your local car stereo specialist shop for assistance on this type of installation.
1. Removetheexistingfactoryradiofromitsdashboardorcenterconsolemounting. Saveallhardwareandbrackets
as they will be used to mount the new radio.
2. Carefully unsnap the plastic frame from the front of the new radio chassis. Remove and discard the frame.
3. Remove the factory mounting brackets and hardware from the existing radio and attach them to the new radio.
CAUTION:DONOTEXCEEDM5X8MMMAXIMUMSCREWSIZE.LONGERSCREWSMAYTOUCHANDDAMAGE
COMPONENTSINSIDETHECHASSIS.
4. Wire the new radio to the vehicle as per step 4 of the Universal Installation Procedure.
5. Mount the new radio assembly to the dashboard or center console using the reverse procedure of step 1.

INSTINST
INSTINST
INSTALLALL
ALLALL
ALLAA
AA
ATT
TT
TION INSTRUCION INSTRUC
ION INSTRUCION INSTRUC
ION INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS
8:30AM - 7PM
9AM - 5PM
CENTRAL EASTERN
6:30AM - 5PM
7AM - 3PM
MOUNTAIN
5:30AM - 4PM
6AM - 2PM
PACIFIC
MON.-FRI.
SATURDAY
DAY TIMEZONE
TOLL-FREE INSTALLATION ASSISTANCETOLL-FREE INSTALLATION ASSISTANCE
TOLL-FREE INSTALLATION ASSISTANCETOLL-FREE INSTALLATION ASSISTANCE
TOLL-FREE INSTALLATION ASSISTANCE
The installation and wiring connections for this unit are so simple, we doubt you'll need our help, but, if you
do, we're here to help you. Just call our toll-free telephone assistance line at 1-800-645-4994 during the days
and hours shown (U.S.A. and Canada only).
7:30AM - 6PM
8AM - 4PM
FASTEN THIS END TO SCREW
STUD ON REAR OF CHASSIS
NUT (5MM)
FASTEN THIS END TO SECURE PART OF DASHBOARD.
DRILL HOLE IF NECESSARY.
SCREW
(5MM)
FOLD-DOWN
DETACHABLE
FRONT PANEL
EXISTING DASH OPENING
FILE EDGES TO FIT IF NECESSARY - DO NOT OVERFILE
NOTE:IF DASHIS SOLID,USE REARSIDE(WITHOUTTHELIP)OF
MOUNTING SLEEVE AS A TEMPLATE & CUT OPENING
UNIVERSAL INSTALLATION USING MOUNTING SLEEVEUNIVERSAL INSTALLATION USING MOUNTING SLEEVE
UNIVERSAL INSTALLATION USING MOUNTING SLEEVEUNIVERSAL INSTALLATION USING MOUNTING SLEEVE
UNIVERSAL INSTALLATION USING MOUNTING SLEEVE
NUT (5MM)
REMOVE THE PLASTIC FRAME FROM THE FRONT OF
THE CHASSIS BY CAREFULLY UNSNAPPING IT.
ISO INSTALLATIONISO INSTALLATION
ISO INSTALLATIONISO INSTALLATION
ISO INSTALLATION
20° MAX.
FRONT PANEL
CAUTION:
FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS
MUST BE MOUNTED WITHIN 20° OF HORIZONTAL. MAKE SURE
THE UNIT IS MOUNTED WITHIN THIS LIMITATION.
SIDEVIEW
OF
CHASSIS
33
33
3
UNSNAP AT 2 PLACES
EACH ON TOP AND BOTTOM
MAXIMUM
SCREWSIZE
M5 x 8
MAXIMUM
SCREWSIZE
M5 x 8
PERFORATED STRAP
RADIO
SCREW STUD
MOUNTINGSLEEVE
PLASTICFRAME
FACTORY MOUNTING
BRACKETS
REMOVALTOOLS
BEND BOTTOM
TABS DOWNWARD
BEND TOP
TABS UPWARD
TYPICAL INSTALLATION

44
44
4
RR RR
RAA
AA
ADIO WIRINGDIO WIRING
DIO WIRINGDIO WIRING
DIO WIRING
RADIO WIRINGRADIO WIRING
RADIO WIRINGRADIO WIRING
RADIO WIRING
REFER TO PAGE 5 FOR SPEAKER WIRING
IMPORTANT
THE BLUE WIRE CAN BE
USED TO REMOTELY ACTI-
VATE AN AUTOMATIC AN-
TENNA OR AN EXTERNAL
AMPLIFIER (SEE ANTENNA
OR AMPLIFIER MANUAL)
9 PIN PLUG
(SEE PAGE 5 FOR SPEAKER
WIRING)
4 PIN PLUGS POSITIVE (+)
TERMINAL 12V
BATTERY
YELLOW
CAR BATTERY
METAL PART OF DASH
(DRILL HOLE IF NECES-
SARY)
SCREW
BLACK
RED “RADIO” FUSE
+ 12V ACCESSORY
BLUE
FUSEBLOCK
RADIO
IMPORTANT
YELLOWWIREMUSTBE
CONNECTEDASSHOWNOR
RADIOWILLNOTOPERATE
PROPERLY
1-AMP FUSE
EXISTING
ANTENNA
CABLE
ANTENNA AUTOMATIC
ANTENNA
ANTENNA
CONNECTOR
ANTENNA
PLUG
FILTER/FUSE
BOX
15-AMP FUSE

RCALINE OUT
JACKTO
OPTIONAL
SUBWOOFER
SPEAKER
GRN
SPESPE
SPESPE
SPEAA
AA
AKK
KK
KER WIRINGER WIRING
ER WIRINGER WIRING
ER WIRING
SPEAKER WIRINGSPEAKER WIRING
SPEAKER WIRINGSPEAKER WIRING
SPEAKER WIRING
REFER TO PAGE 4
FOR RADIO WIRING
WARNING!
!THE AMPLIFIERS IN THIS RADIO ARE ONLY DESIGNED FOR USE WITH 4 SPEAKERS.
!NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 2 SPEAKERS.
!NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND.
!FAILURE TO WIRE EXACTLY AS SHOWN BELOW MAY CAUSE ELECTRICAL
DAMAGE TO THE RADIO.
OPTIONALCDCHANGER
WHITEw/BLACKSTRIPE
WHITE
LEFTFRONTSPEAKER RIGHTFRONTSPEAKER
LEFTREARSPEAKER RIGHTREARSPEAKER
GREEN
GRAYw/BLACKSTRIPE
9-PINPLUGS
GREENw/BLACKSTRIPE VIOLETw/BLACKSTRIPE
RADIO
8:30am - 7:00pm Eastern
9:00am - 5:00pm Eastern
Monday - Friday
Saturday
1-800-645-4994
HELP!
GRAY
VIOLET
4-PINPLUGS
SEEPAGE4 FOR
RADIOWIRING
8-PIN DIN SOCKET FOR CONNECTION TO
OPTIONAL CD CHANGER
6
COMPACT
DINCABLE(SUPPLIED
WITH CD CHANGER).
NOTE:
CALL 1-800-645-4994 FOR RECOMMENDATIONS
OF MODEL CHANGERS THAT WILL WORK WITH
YOURRADIO.
WHITE = LEFT
RED=RIGHT
RCALINE OUT
JACKS
FOR USE WITH
OPTIONAL
EXTERNAL
AMPLIFIERS
RCALINEIN
JACKS
FOR USE WITH
AUXILIARYINPUT
DEVICES(CD
PLAYER,ETC.)
BLK GREY
55
55
5

6
OPEROPER
OPEROPER
OPERAA
AA
ATT
TT
TING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS
OPEROPER OPEROPER
OPERAA
AA
ATT
TT
TING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS
11
11
1ON-OFFPOWERBUTTON
Press this button to turn the unit on and off
when the ignition switch is on. When the unit
is off, the Liquid Crystal Display (LCD) panel
will normally display the time-of-day. If the
radio is off when the ignition switch is turned
off, the POWER button must be pressed to
turn on the radio after the ignition switch is
turned on. If the ignition switch is turned off
while the radio is on, the radio will come on
automatically when the ignition switch is
again turned on.
22
22
2VOLUMELEVELCONTROL
To increase the volume level, rotate the
PUSHSELECT-VOLcontrolclockwise(CW).
Thevolumewill increaseandthelevelwillbe
shown on the display panel from a minimum
of 00 toamaximum of 100. To decrease the
volumelevel,rotatethePUSHSELECT-VOL
control counterclockwise (CCW). The vol-
ume will decrease as shown on the display
panel. This control also includes the inte-
gral Select button 3for adjustment of the
bass, treble, balance and fader levels as
described in 4, 5, 6, and 7.
33
33
3PUSHSELECTBUTTON(SEL)
This button is used to select the audio function
(bass, treble, balance, or fade) to be adjusted
using the Volume Level control 2. Pressing the
Select button once will set the unit for volume
adjustment(VOL willappearonthedisplaypanel).
Pressing the button additional times will select
bass adjustment (BAS on display), treble (TRB),
balance (BAL), or fader (FAD). The display will
automatically return to the normal indication 5
secondsafter the last adjustment or when another
function is activated.
NOTE: If the BAS or TRB functions are set while
the Equalizer function (EQ) is active, the
Equalizerfunctionwillautomaticallyrevert
to the FLAT setting.
44
44
4BASSCONTROL
To adjust the bass level, first select the Bass
mode by pressing the PUSH SELECT button 3
so the BAS indication appears on the display
panel. Within 5 seconds of choosing the Bass
mode, rotate the Volume Level control 2CCW or
2
3
4
5
6
7
8, 10 9
11
12
21
22
37
38
1718
29
31
28
15
32, 33
BEHIND PANEL
2019
34
13 27
35 23
39 24 40 25 41
16
1
30 14
26
36
CAR COMPACT DISC PLAYER/RECEIVER
SUB
A

CW to adjust the bass response as desired. The
level will be shown on the display panel from a
minimum --10 to a maximum of 10 (00 indicates
flatresponse).The display will automatically return
to the normal indication 5 seconds after the last
adjustment or when another function is activated.
55
55
5TREBLECONTROL
To adjust the treble level, first select the Treble
modebypressingthePUSHSELECT button3so
the TRB indication appears on the display panel.
Within 5 seconds of choosing the Treble mode,
rotate the Volume Level control 2CCW or CW to
adjust the treble response as desired. The level
willbe shown on the display panel froma minimum
of --10 to a maximum of 10 (00 indicates flat
response). The display will automatically return to
the normal indication 5 seconds after the last
adjustment or when another function is activated.
66
66
6LEFT/RIGHTBALANCECONTROL
To adjust the left-right speaker balance, first select
theBalance modeby pressing thePUSHSELECT
button 3so the BAL indication appears on the
display panel. Within 5 seconds of choosing the
Balance mode, rotate the Volume Level control 2
CCWtoadjustthestereobalancetotheleftchannel
speakers, or CW to adjust it to the right channel
speakers. The balance position will be shown on
thedisplaypanelfromBAL10L(fullleft)toBAL10R
(full right). When the volume level between the left
and right speakers is equal, BAL L=R will be
shown on the display panel. The display will
automatically return to the normal indication 5
seconds after the last adjustment or when another
function is activated.
77
77
7FRONT/REARFADERCONTROL
Toadjustthefront-rearspeakerbalance,firstselect
the Fader mode by pressing the PUSH SELECT
button 3so the FAD indication appears on the
display panel. Within 5 seconds of choosing the
Fader mode, rotate the Volume Level control 2
CCWorCWtoadjustthefront-rearspeakerbalance
as desired. The fader position will be shown on
the display panel from FAD 10R (fullrear)toFAD
10F (full front). When the level between the
frontandrearspeakersisequal,FAD F=Rwill
be shown on the display panel. The display
will automatically return to the normal
indication 5 seconds after the last adjustment
or when another function is activated.
88
88
8LOUDNESS CONTOUR (
BAND/ LOUD)
When listening to music at low volume levels,
this feature will boost the bass and treble
ranges to compensate for the characteristics
of human hearing. Press the
BAND /LOUD
button for 2 seconds to activate this feature
andtheindication LOUDONwillappearonthe
display panel for 5 seconds. Pressing the
button again for 2 seconds will deactivate the
feature, and LOUD OFF will appear on the
display panel for 5 seconds.
99
99
9AUDIOMUTESELECTOR(MUT)
Press this button momentarily to mute the
volume from the system (MUTE will appear
flashing on the display panel). Pressing this
button again, adjusting the Volume Level
control 2, or pressing any other button, will
returntothevolumelevelsettinginusebefore
the Mute function was activated.
blbl
blbl
blAM/FMBANDSELECTOR( BAND/ LOUD)
Eachtimethe
BAND/ LOUDbuttonispressed,
the radio band is changed. The indications
F1, F2, F3 or AM will appear in the display
panel according to your selection.
bmbm
bmbm
bm AUTOMATICUP/DOWNTUNING
( / )
Toselectaradiostationintheautomaticmode,
momentarily press the Up Tuning ( )
buttonto advancetheunit tothenextavailable
station, or the Down Tuning () button to
tune downward to the next available station.
The radio will automatically seek the next
strongest station. If the Local mode (LOCAL)
is active, the radio will seek the next strongest
local station when either button is pressed.
7
OPEROPER OPEROPER
OPERAA
AA
ATT
TT
TING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS

bnbn
bnbn
bn MANUALSEEKTUNING
Thisfunctionisusedtosearchrapidlyupward
ordownwardforadesiredstation.Bypressing
either tune button for more than 2 seconds,
the radio will enter the MANUAL seek mode
asdisplayedmomentarilyonthepanel.When
either button is pressed and held in this
mode, the radio will tune rapidly up or down
andwill stopatthe stationofchoice when the
button is released. A momentary press of
eitherbutton in this modewillcause the radio
to tune upward or downward two digits at a
time.If tuningisnotactivatedwithin5seconds
ofenteringtheMANUAL mode,the radio will
automaticallyreverttothedefaultAUTOmode
as indicated momentarily on the panel.
bobo
bobo
boLOCAL/DISTANTSELECTOR( LOC )
This feature is used to select the strength of
thesignals at which the radio will stop during
Automatic Up/Down Tuning. Pressing the
button will select the Local setting (LOCAL
willappearonthedisplaypanelfor5seconds)
and tuning will select only strong (local)
stations for reception. Pressing the button
again will select the Distant setting (DX will
appear on the display panel for 5 seconds)
and the tuning will stop at a wider range of
signals, including weaker (more distant)
stations.
bpbp
bpbp
bp FMMONOSELECTOR(MONO)
During FM radio operation, this button is
used to select mono or stereo reception of
thebroadcastsignal.Undernormalreception
conditions, the unit should be left in the
stereo mode as indicated by ST and the
associated signal strength indicator on the
display panel when tuned to an FM stereo
signal. If the stereo signal is too noisy for
comfortablelistening,presstheMONObutton
toswitchtomonoreception(theSTindication
will disappear from the display panel). To
return to stereo reception mode, press the
button again; the ST indication is displayed.
bqbq
bqbq
bq AUTOSTORE/PRESETSCAN(AS/PS)
Pressthisbuttonmomentarilytoscanthestations
pre-setintothememoryonthe3FMbandsorthe
AM band. The unit will stop at each pre-set
station for 5 seconds before continuing to the
next pre-set station (the pre-set number on the
display panel will flash during Pre-Set Scan
operation). Press the button again momentarily
to stop Pre-Set Scan operation and remain on
the selected frequency.
Pressing and holding the button for longer than
2 seconds will activate the Auto-Store Tuning
feature which will automatically scan and enter
up to 6 stations into the 6 pre-set memories on
eachoftheFMbands,ortheAMbandinuse. After
entering the stations into the memories, the unit
will automatically stop at each station for 5
seconds so each can be heard. If you have
alreadysetthepre-setmemoriesto yourfavorite
stations,activatingtheAuto-StoreTuningfeature
will erase those stations and enter the new
ones. This feature is most useful when travelling
in a new area where you are not familiar with the
local stations.
brbr
brbr
br STATION PRE-SET MEMORIES
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
2. Selectthefirststation tobe pre-setusingthe
Automatic Up/Down bm, or Manual Seek bn
Tuning Controls.
3. Press the pre-set button to be set and
continue to hold it in for approximately 2
seconds. The pre-set number will appear
on the display panel indicating that the
station is now set into that pre-set memory
position. The station can now be recalled at
any time by pressing that button.
4. Repeat the above procedure for the
remaining 5 pre-sets on that band and for
the other 3 bands on the unit.
88
88
8
OPEROPER OPEROPER
OPERAA
AA
ATT
TT
TING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS

99
99
9
bs bs
bs bs
bs EQUALIZER(
EQ )BUTTON
The
EQ button applies preset sound effects to
the unit’s audio output signal.The
EQ button,
when pressed, will activate one of the following
operatingmodes(CLASSICS,POPM,ROCKM,
DSP OFF or FLAT). If the Equalizer function is
active, as displayed on the panel, and the bass
and/or treble level is set, the Equalizer function
reverts to the FLAT setting. On the other hand, if
the Equalizer function is activated, the bass/
treble setting(s) are ignored. Conversely, when
theEqualizerfunctionisnotactive,theunitreturns
to the user set bass and treble levels.
bt bt
bt bt
bt STATION SCAN ( SCN ) BUTTON
When this button is pressed during radio
operation,eachstation inthe currentbandwillbe
scanned in the upward direction; each displayed
station will flash for 5 seconds before moving on
tothenextstation.Ifthelocalmodeisactive,only
the stronger, nearby stations in the current band
will be scanned. When the desired station
appears, press the
SCN button again to remain
on that frequency.
bubu
bubu
bu LIQUIDCRYSTALDISPLAYPANEL
The Liquid Crystal Display (LCD) panel displays
the frequency, time and activated functions,
including a combination audio level/disc
indicator in the form of dual disc icons ( )
with circular bar graphs depicting the the audio
signal. In addition, the display also contains a
receivesignal indicatorwhichdepictstherelative
strength of the incoming broadcast frequency.
NOTE: Itis acharacteristicof LCD panels that,
if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of
the numbers on the LCD may slightly
decrease. TheLCDread-outwillreturn
to normal when the temperature
Increases to a normal range.
clcl
clcl
cl DISC SLOT
Gentlyinsertthediscintotheslot(labelsurface
facing up) until the soft-loading mechanism
engages and pulls the disc in. The S--CDP
indication will appear on the display panel for
5 seconds, the center of the disc ( )
indication illuminates and becomes animated,
andthetracknumberandelapsedtimeappear
on the display panel.
CAUTION: This unit is designed for play of
standard 5" (12cm) compact
discs ONLY. Do not attempt to
use 3" (8cm) CD-Singles in this
unit, either with or without an
adapter, as damage to the player
and/or disc can occur. Such
damagewillnotbecoveredbythe
Warranty on this product.
cmcm
cmcm
cm TRACK SELECT ( / )
The Track Select function of the Tune/Seek/
Track buttons is used to quickly access the
beginning of a particular track when a disc is
in play. Each time the Forward Track Select
() button is pressed, the next higher track
number will be selected as shown on the
display panel. Similarly, each time the
Backward Track Select ( ) is pressed, the
next lower track number will be selected as
shown on the display panel.
cncn
cncn
cn CUE/REVIEW FUNCTIONS ( / )
High-speed audible search to any section of
the disc can be made by the Cue and Review
functions.PressandholdtheCue( )button
toadvance rapidly intheforward direction (the
advancing disc playing time will be shown on
the display panel, except for discs formatted
withMP3audio),ortheReview( )buttonto
advance rapidly in the backward direction (the
decreasing disc playing time will be shown on
the display panel.
9
OPEROPER
OPEROPER
OPERAA
AA
ATT
TT
TING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS

cpcp
cpcp
cpREPEATPLAYSELECTOR( RPT )
During disc play, press this button to repeat
the play of the selected track (S--RPT will
appearonthedisplaypanel). Playofthetrack
will continue to repeat until the button is
pressed again and the S--RPT indication
disappears from the display panel. Repeat
Playmode will alsobecanceled by activating
theTrackScanco orShufflePlaycq functions.
cqcq
cqcq
cq SHUFFLEPLAYSELECTOR( SHF )
During disc play, press this button to play the
tracks on the disc in a random shuffled order
(S--SHF will appear on the display panel). In
Shuffle Play mode, the TRACK Select function
will also select tracks in random order instead
of the normal progression. The Shuffle Play
mode can be canceled by pressing the button
again (S--SHF indication will disappear from the
display panel) or by activating the Repeat Play
cp or Track Scan co functions.
crcr
crcr
cr DISC SELECT UP/DOWN ( UP / DN )
These buttons are used to select the desired
disc for play during changer operation. To ad-
vance to a higher number disc, press the UP
button, and to return to a lower number disc,
press the DN button. The number of the disc in
play will be shown on the display panel.
cscs
cscs
cs DISC PAUSE ( PAU )
When this button is pressed during disc play,
S--PAUSE will appear on the display, and
co co
co co
co TRACK SCAN SELECTOR (
SCN )
Duringdisc play, pressthis button toplaythe
first 10 seconds of each track on the disc
(S--SCN will appear on the display panel).
When a desired track is reached, press the
SCN button again to cancel the function
(S--SCN will disappear from the display
panel) and play of the selected track will
continue. Scan mode will also be canceled
by activating the Repeat Play cp, or Shuffle
Play cq functions.
disc play will be suspended; the center of the
disc icon ( ) will stop rotating, indicating disc
pause. When the button is pressed again,
S--PAUSEwilldisappearfromthedisplayandplay
willresumefromthepointatwhichpauseoccurred.
ctct
ctct
ct DISC EJECT ( )
Disc play is stopped and the disc is ejected when
this button is pressed. Radio or CD changer
operation will automatically resume depending
on which mode was in operation prior to disc play.
If the disc is not removed from the unit within 15
seconds of being ejected, it will automatically be
re-loaded into the unit to prevent it from being
accidentally damaged ( will appear on the
displaypanel to indicate that a disc is loaded inthe
player). Play of the disc can be resumed by using
the MODE button cucu
cucu
cu to choose the CD player
function.
cucu
cucu
cu MODESELECTOR(MODE)
During radio or tape play, press this button to
select operation of the optional CD changer as
shown by CDC,the disc number and the track
number on the display panel. Refer to the CD
Changer Controls section for specific operating
instructions.
If the button is pressed when no CD changer is
connected to the unit, no CDC indications will
appear on the display panel. The unit will then
return to radio operation. To return to the disc play
operation (if a compact disc is loaded in the unit),
pressthebuttonagain.Duringdiscplay,pressthis
buttontochangetoradiooperationwithoutejecting
the disc.
dl dl
dl dl
dl SUB-WOOFERSELECT
When the SUB-WOOFER button is pressed, the
sub-woofer audio output, via the single RCA
connector on the green wire, is made available to
an optional sub-woofer speaker, if installed in the
vehicle.
1010
1010
10
OPEROPER OPEROPER
OPERAA
AA
ATT
TT
TING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS

dmdm
dmdm
dmTIME/FREQUENCY SELECTOR(T/F)
Pressing the Time/Frequency (T/F) button will
displaythetime ofday for5 seconds,afterwhich
the display will automatically return to the radio,
tapeorCDchangerdisplay,dependingonwhich
one was currently active.
Tosetthecorrecttimeofday,refertotheprocedure
for Setting the Clock.
dn dn
dn dn
dn
THEFT-DETERRENT LED
Located on the chassis behind the front panel,
a light-emitting diode (LED) will flash when the
panel is removed. The flashing light serves as
avisualwarningtothewould-bethiefthattheunit
has been disabled by removal of the front panel.
do do
do do
do RESET BUTTON
A RESET button is located on the front of the
chassis (front panel must be removed to access
the button). The reset circuitry is provided to
protect the microprocessor circuitry and should
only be activated under the following
circumstances as it will erase the time and pre-
set memories.
1. Upon initial installation after all wiring is
completed.
3. Ifthereisamalfunctionofanyoftheswitches
ontheunit, pressingthe RESET buttonmay
clear the system and return to normal
operation.
dpdp
dpdp
dpFRONTPANELRELEASEBUTTON
This button is used to release the mechanism
that holds the front panel to the chassis. To
detach the front panel, press the button so that
the left side of the panel is released. Grasp the
released side and pull it off of the chassis. To
re-attach the panel, position the right side of the
panel in place first and then press the left side
of the panel until the mechanism locks it into
place.
11
OPEROPER
OPEROPER
OPERAA
AA
ATT
TT
TING INSTRUCING INSTRUC
ING INSTRUCING INSTRUC
ING INSTRUCTT
TT
TIONSIONS
IONSIONS
IONS
NOTESONUSEOFFRONTPANEL
1. Make sure the front panel is right-side-
up when attaching it to the chassis as it
cannotbeattachedwhenup-sidedown.
2. Donotpressveryhardonthefrontpanel
whenattachingittothechassis.Nomore
than light to moderate pressure should
be needed.
3. When attaching the front panel, make
sure the right side is correctly engaged
before pressing the left side to lock it
into position.
4. When taking the front panel with you,
please use the supplied carrying case
to protect the panel from dirt and
damage. Make sure there is no dust or
dirt on the electrical terminals on the
back of the panel as this could cause
intermittent operation or other
malfunctions.
ATTACHINGTHEFRONTPANEL
DETACHINGTHEFRONTPANEL
Release
button
Engage right
side first

SETTING THE CLOCK
1. Switch the vehicle ignition and radio on.
2. Momentarily press the Time/Frequency (T/F) Select button dmdm
dmdm
dm so that the time is shown
on the display panel.
3. Press and hold the Time/Frequency button until the time display begins flashing. While
the display is still flashing, press the Up Tuning ( ) button to adjust the hours and the
A or Pindication, then the Down Tuning ( ) button to adjust the minutes to the correct
time.
4. Five seconds after the last hour or minute adjustment is made, the time will be set in the
unit and the display will return to the normal indication.
Ifa problem shoulddevelop whileoperating theCD player, anerror code (ER-1,ER-2,
ER-3, etc.) may appear on the display panel. This can indicate a number of problems
withtheunit, includingamechanical erroror anerrorin themicroprocessor controlofthe
player. If anerror codeshouldappear,try ejectingandre-loadingthe discintotheplayer.
Whilethe discis outof theunit, makesureit isclean, undamaged,and loadedcorrectly
(labelsurface up). You mayalso tryactivating theRESETbutton dodo
dodo
doonthe unit,but this
will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty
station near you forfurther assistance.
CD PLAYER ERROR CODES
1212
1212
12
SETSET SETSET
SETTT
TT
TING THE CLOCK/CD ERRING THE CLOCK/CD ERR
ING THE CLOCK/CD ERRING THE CLOCK/CD ERR
ING THE CLOCK/CD ERROR CODESOR CODES
OR CODESOR CODES
OR CODES

SPECIFICASPECIFICA
SPECIFICASPECIFICA
SPECIFICATT
TT
TIONSIONS
IONSIONS
IONS
Size: 7” W x 2” H x 6” D
178 mm x 50 mm x 150 mm
Operating Voltage: 12 volts DC, negative ground
Output Power: 160 watts maximum (40 watts x 4 channels)
Output Wiring: Floating-ground type designed for 4 speaker use.
The amplifiers in this unit are NOT designed for use with
2 speakers.
RCA pre-amp level outputs.
Output Impedance: Compatible with 4 - 8 ohm speakers
Pre-Amp Output: 500 mv.
Tuning Range: AM: 530 - 1,710 KHz. (10 KHz. step)
FM: 87.5 - 107.9 MHz. (200 KHz. step)
Sensitivity: AM: >45 dB.
FM: >15 dB at a S/N of 30 dB
FM Stereo Separation: 25 dB at 1kHz
CD Frequency Response: 5 – 20 kHz. +0/-3 dB
CD Signal/Noise Ratio: >70 dB
CD Channel Separation: >60 dB
CD Distortion: 0.2%
*Specifications are subject to change without notice.
SPECIFICASPECIFICA SPECIFICASPECIFICA
SPECIFICATT
TT
TIONSIONS
IONSIONS
IONS
1313
1313
13

NOTES ON DISCS:
Attempting to use non-standard shape discs (e.g.; square, star, heart) may damage the unit. Be
sure to use round-shape CDs only in this unit.
NOTESONCD-Rs(RecordableCDs)/CD-RWs(RewriteableCDs):
1. Be sure to use discs with the following marks only for play in this unit:
2. The unit cannot play a CD-R or CD-RW that is not finalized. (Please refer to the
manual of your CD-R/CD-RW software for more information on the finalization
process.)
3. Depending on the recording status, conditions of the disc and the equipment used
for the recording, some CD-Rs/CD-RWs may not be played on this unit.
RELIABLEPLAYBACK:
To ensure more reliable playback, please note the following recommendations:
1. Use CD-RWs with speed 1x to 4x.
2. Use CD-Rs with speed 1x to 8x, and write with speed 1x to 2x.
3. Do not play a CD-RW which has been written on more than 5 times.
NOTESONMULTI-SESSIONDISCS:
If the first track of the first session is audio CD data, then the unit will play only the audio CD
data.
1414
1414
14
NONO NONO
NOTES ON DISCSTES ON DISCS
TES ON DISCSTES ON DISCS
TES ON DISCS

Built into this radio are controls to operate an
optional CD changer. Please check with your
Rampage/Audiovox car stereo specialist for
recommendations of the models that will work
with this radio.
Once the changer is installed and properly
connected, it may be necessary to press the
RESET button behind the radio front panel to
initialize the complete installation.
Adjustmentoftheaudiofunctions(volume,tone,
balance, and fader) for the CD changer operate
in the same manner as they do for radio play.
The following controls will operate the CD
changer when it is installed and connected to
thisradio. Refer to the owner’s manual included
with the CD changer for instructions on the
installation and correct loading and use of the
CD magazine.
dqdq
dqdq
dqCDCHANGERPAUSE/PLAYSELECTOR
( PAU )
During radio, or tape play, press the MODE
button cucu
cucu
cu toselectoperationoftheCDchanger
as shown by CDC on the display. Disc play will
begin, the disc and track number will be shown
on the display panel, and the center of the disc
icon ( ) will become animated. If a new
magazine has been loaded into the changer,
play will begin from the first track of the first disc
in the magazine. If a magazine was already in
the changer, play will resume from the track on
the disc previously in play.
During CD changer play, pressing the
PAU
button once will stop changer play; PAUSE will
appear on the display and the center of the disc
icon will remain stationary. To resume disc
play, press the
PAU button again and disc play
will resume from the point at which it was
interrupted.
drdr
drdr
dr DISC SELECT ( UP/DN )
These buttons are used to select the desired
disc for play. To advance to a higher number
CD CHCD CH CD CHCD CH
CD CHAA
AA
ANGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTROLOL
OLOL
OLSS
SS
S
1515
1515
15
CD CHCD CH
CD CHCD CH
CD CHAA
AA
ANGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTROLOL
OLOL
OLSS
SS
Sdisc,pressthe
UP button Toreturntoalower
number disc, press the
DN button. The
numberofthedisc in play will be shown on the
display panel.
dsds
dsds
ds TRACK SELECT ( / )
This button is used to quickly select the
beginning of a particular track. With each
momentary press of the Forward Track Select
button( ),thenexthighertracknumberwill
be selected as shown on the display panel.
Similarly, with each momentary press of the
BackwardTrackSelectbutton( ),thenext
lower track number will be selected.
dtdt
dtdt
dt FOWARD/REVERSE SEARCH (CUE/
REVIEW)
High-speed audible search to any forward or
reverse section of the disc can be made with
this feature. Press and hold the forward (cue)
button( )toadvancerapidlyintheforward
direction,orpressandholdthereverse(review)
button( )toadvancerapidlyinthereverse
(backward)direction.Ineithercase,thecenter
of the disc icon will rotate faster when search
is active.
dudu
dudu
du TRACKSCANSELECTOR( SCN )
Whenthe
SCN buttonismomentarilypressed,
the SCN indication will appear on the display
panel, and the first 10 seconds of each track
on the disc will be played in order. When a
desiredtrackisreached,pressthe
SCN button
again and play of the selected track will
continue (SCN will disappear from the display
panel). The Track Scan mode will also be
canceled by activating any other disc function
(Track Select, Repeat or Random).
When the
SCN button is pressed and held for
more than 2 seconds, the disc scan mode is
activated; DSN will appear on the display and
the first 10 seconds of the first track on each
disc will be played in disc order. This mode is
canceled in the same manner as before.

CARE AND MAINTENANCE
The radio section of your new sound system does not require any maintenance. We
recommend you keep this manual for reference on the many features found in this unit as well
as how to set the clock. The compact disc player section also requires no routine maintenance,
but proper understanding of its use and handling will help you obtain maximum enjoyment of
its capabilities. The following points should be observed:
1616
1616
16
CD CHCD CH CD CHCD CH
CD CHAA
AA
ANGER CONTRNGER CONTR
NGER CONTRNGER CONTR
NGER CONTROLOL
OLOL
OLS/CD ERRS/CD ERR
S/CD ERRS/CD ERR
S/CD ERROR CODES/CAOR CODES/CA
OR CODES/CAOR CODES/CA
OR CODES/CARE ARE A
RE ARE A
RE AND MAND MA
ND MAND MA
ND MAINTENAINTENA
INTENAINTENA
INTENANCENCE
NCENCE
NCE
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make sure
the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual of the CD
changer). Re-load the magazine and check for proper operation. You may also try activating
the RESET button dodo
dodo
do on the unit, but this will also erase the time and pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station near
you for further assistance.
CD CHCD CH
CD CHCD CH
CD CHAA
AA
ANGER ERRNGER ERR
NGER ERRNGER ERR
NGER ERROR CODESOR CODES
OR CODESOR CODES
OR CODES
el el
el el
el TRACK REPEAT PLAY SELECTOR
(
RPT )
When the
RPT button is momentarily
pressed, the RPT indication will appear on
thedisplaypanelandplayofthecurrenttrack
will be continually repeated until the Track
Repeat mode is canceled by pressing the
RPT button again or by activating the Track
Select, Random Play or Scan functions.
Whenthe
RPT buttonispressedandheldfor
more than 2 seconds, the disc repeat mode
is activated; DRT will appear on the display
and the play of the current disc will be
continuously repeated. This mode is
canceled in the same manner as before.
emem
emem
em SHUFFLEPLAYSELECTOR( SHF )
When the
SHF button is momentarily pressed,
the SHF indication will appear on the display
panel and the tracks on the disc will be played in
a random, shuffled order. The Track Select
buttons dsds
dsds
ds will also select tracks in the shuffled
order instead of the normal progression. The
TrackShuffle modecanbecanceledbypressing
the
SHF button again or by activating the Track
Select, Repeat Play or Scan functions.
When the
SHF button is pressed and held for
more than 2 seconds, the disc shuffle mode is
activated; DSF will appear on the display and the
play of the discs in the magazine will be played
inarandomshuffledorder.Thismodeiscanceled
in the same manner as before.

1717
1717
17
THIS PAGE LEFT BLANK INTENTIONALLY

!Whencleaningtheinteriorofthevehicle,donotgetwaterorcleaningfluidsontheunit.
!TheCDplayerisaprecisioninstrumentandwillnotoperateproperlyinextremehotor
cold. Incaseofsuchconditions,waituntiltheinteriortemperatureofthevehiclereaches
anormaltemperaturebeforeusingtheplayer.
!If the temperature inside the player gets too hot, a protective circuit will automatically
stopplay ofthe disc. Inthiscase, allowtheunit tocooloff beforeoperating theplayer
again.
!Never insert anything other than a 5" (12 cm) compact disc into the player as the
mechanismcan bedamagedby foreignobjects.
!Do not attempt to use 3" (8 cm) CD-Single discs in this unit, either with or without an
adaptor, as damage to the player and/or disc may occur. Such damage will not be
covered by the Warranty on this product.
!When not using the disc player, always remove the compact disc.
!Whenthevehiclewarmsupduringcoldweatherorunderdampconditions,moisturemay
condenseon thelensof thediscplayer. Should thisoccur,the playerwillnot operate
properlyuntilthemoisturehasevaporated.
!TheunitisdesignedwithavibrationdampeningCDmechanismtominimizeinterruption
ofdiscplayduetonormalvibrationinamovingvehicle. Whendrivingonveryroughroads,
however,occasionalsoundskipsmayoccur. Thiswillnotscratchordamagethedisc
andnormal playwill resumewhen therough conditionscease.
HANDLING COMPACT DISCS
Dirt,dust, scratches,andwarpage cancause skipsinthe playbackanddeteriorationof
sound quality. Please follow these guidelines to take care of your compact discs:
!Use only compact discs with the mark:
!Fingerprints,dust,anddirtshouldbecarefullywipedoffthedisc’splayingsurface(shiny
side) with a soft cloth. Wipe in a straight motion from the inside to the outside of the
disc.
!Neveruse chemicals suchas recordsprays, household cleanersor thinner to clean
compact discs. Such chemicals can irreparably damage the disc’s surface.
!Discs should be kept in their storage cases when not in use.
!Donotexposediscstodirectsunlight,hightemperaturesorhighhumidityforextended
periods.
!Donotstickpaper,tape,orlabelsonthediscsurfacesnorwriteonthemwithanytype
ofmarker.
SPECIFICASPECIFICA SPECIFICASPECIFICA
SPECIFICATT
TT
TIONS / CAIONS / CA
IONS / CAIONS / CA
IONS / CARE ARE A
RE ARE A
RE AND MAND MA
ND MAND MA
ND MAINTENAINTENA
INTENAINTENA
INTENANCENCE
NCENCE
NCE
1818
1818
18
CACA CACA
CARE ARE A
RE ARE A
RE AND MAND MA
ND MAND MA
ND MAINTENAINTENA
INTENAINTENA
INTENANCENCE
NCENCE
NCE

1919
1919
19
WW WW
WAA
AA
ARRRR
RRRR
RRAA
AA
ANTNT
NTNT
NTYY
YY
Y
USA.: AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.,HAUPPAUGE, NY 11788 1-800-645-4994
CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
12 MONTH LIMITED WARRANTY
AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original
retail purchaser of this product that should this product or any part thereof, under normal
use and conditions, be proven defective in material or workmanship within 12 months
from the date of original purchase, such defect(s) will be repaired or replaced with new
or reconditioned product (at the Company's option) without charge for parts and repair
labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be
delivered with proof of warranty coverage (e.g. dated bill of sale), specification of
defect(s), transportation prepaid, to the warranty center at the address shown below.
This Warranty does not extend to the elimination of car static or motor noise, to correction
of antenna problems, to costs incurred for installation, removal, or reinstallation of the
product, or damage to tapes, compact discs, speakers, accessories, or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial
number/barcodelabel(s). THEEXTENT OFTHE COMPANY'SLIABILITY UNDERTHIS
WARRANTYISLIMITEDTOTHEREPAIRORREPLACEMENTPROVIDEDABOVEAND,
INNOEVENT,SHALLTHECOMPANY'SLIABILITYEXCEEDTHEPURCHASEPRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES,INCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITY,SHALL
BELIMITED TO THE DURATION OF THIS WRITTENWARRANTY. ANY ACTION FOR
BREACHOFANYWARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOF
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM
DATEOFORIGINALPURCHASE. INNOCASESHALLTHECOMPANYBELIABLEFOR
ANYCONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OFTHISOR ANY
OTHERWARRANTY,EXPRESSORIMPLIED,WHATSOEVER. Nopersonorrepresentative
is authorized to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above limitations
or exclusions may not apply to you. This Warranty gives you specific legal rights and you
may also have other rights which vary from state to state.
128-4270A

© 2003 Audiovox Electronics Corp., Hauppauge, NY 11788 Printed in China
2020
2020
20
128-6649A