Audiovox WHS200 User manual

Two Channnel
Automotive Infrared
Stereo Headphone System
Model WHS200
OWNERS
MANUAL
36 MONTH LIMITED WARRANTY
Applies to Audiovox Mobile Video Products
AUDIOVOXCORPORATION(theCompany)warrantstotheoriginalretailpurchaserofthisproductthatshouldthisproduct
oranypartthereof,undernormaluseandconditions,beprovendefectiveinmaterialorworkmanshipwithin36monthsfrom
thedateoforiginalpurchase,suchdefect(s)willberepairedorreplacedwithreconditionedproduct(attheCompany'soption)
withoutchargeforpartsandrepairlabor.
ToobtainrepairorreplacementwithinthetermsofthisWarranty,theproductistobedeliveredwithproofofwarrantycoverage
(e.g.dated billofsale),specificationofdefect(s),transportationprepaid,totheCompanyattheaddressshownbelow.
ThisWarrantydoesnotextendtotheeliminationofexternallygeneratedstaticornoise,tocorrectionofantennaproblems,to
costsincurredforinstallation,removalorreinstallationoftheproduct,ortodamagetotapes,discs,speakers,accessories,or
vehicleelectricalsystems.
ThisWarrantydoesnotapplytoanyproductorpartthereofwhich,intheopinionoftheCompany,hassufferedorbeendamaged
throughalteration,improperinstallation,mishandling,misuse,neglect,accident,orbyremovalordefacementofthefactory
serialnumber/barcode label(s). THE EXTENT OF THECOMPANY'SLIABILITYUNDERTHISWARRANTYISLIMITED
TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
ThisWarrantyisinlieuofallotherexpresswarrantiesorliabilities. ANYIMPLIEDWARRANTIES,INCLUDINGANYIMPLIED
WARRANTYOFMERCHANTABILITY,SHALLBELIMITEDTOTHEDURATIONOFTHISWRITTENWARRANTY. ANY
ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL
PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL
DAMAGESFORBREACHOFTHISORANYOTHERWARRANTY,EXPRESSORIMPLIED,WHATSOEVER. Noperson
orrepresentativeisauthorizedtoassumefortheCompanyanyliabilityotherthanexpressedhereininconnectionwiththesale
ofthis product.
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or
consequentialdamagesotheabovelimitationsorexclusionsmaynotapplytoyou. ThisWarrantygivesyouspecificlegalrights
andyoumayalsohave otherrightswhichvaryfromstatetostate.
U.S.A. : AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NEW YORK 11788 l1-800-645-4994
128-5834

INTRODUCTION
CONGRATULATIONS on your purchase of the
the state-of-the-art Dual Channel Stero Automotive
Infrared Stereo Headphone System from
Audiovox Corporation. This system frees you
from the tangle of headphone wires and lets you
enjoy music or video without the tangle of cables
around you. To ensure the best performance of
your system, please read this manual carefully.
SPECIAL FEATURES
Dual Channel.
Automatic Level Control prevents input signal over
loading.
Uses high frequency infrared light to assure a clean
signal for clear reception.
EXPLANATION OF CONTROLS (Fig. 1)
Infrared Transmitter
1. INFRARED LED TRANSMITTERS – Sends
signals to headphones. Permits connection
to two stereo sources, providing simultaneous
transmisssion of both stereo signals.
Headphone Receivers
2. INFRARED PICKUP SENSORS – Receives
signals from transmitter.
3. BATTERYCOVER
4. VOLUMECONTROL
setting to a low setting as it is possible that the
signal of one channel could be louder than the other.
1. Be sure batteries are properly installed in the
headphones.
2. Turn the headphone volume nearly off before
turning on the power. Turn on the headphone
power then increase the headphone volume
to a comfortable level. You can increase the
source audio volume if necessary (when
connected to a variable audio source such
as a headphone source).
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications.
Product Specifications:
Operating range: up to 25 Ft.
Frequency Response: 35 – 18,000 Hz
S/N ratio: 60 dB
Channel Separation: 45 dB
1
Fig. 2
5. POWERSWITCH
6. POWER INDICATOR LED
7. Channel A/B Switch
8. AUTOON/OFFMICRO SWITCH
BATTERY INSTALLATION (Fig.2)
1. Place two alkaline AAA batteries in the
Headphones(s) battery compartment making sure
that the battery polarity is correct.
Operation
Please Read Carefully to Prevent Damage to the
Headphones or your Ears:
WARNING: Before switching between channels A
and B, remove headphones and turn the volume
Fig. 1
2
3
6
5
4
LR
7
AutoON/OFF
MicroSwitch is
activatedwhen
headphonesare
placedonhead
8