Audix SMT25 User manual

SMT25
OVERVIEW
The MST25 is a professional, simple to use shockmount sustem that attaches to any
standard microphone tand with either 3/8” or 5/8” threads. the SMT25 is provided
with a 3/8” threaded inset that allows it to be used with European-style mic stands.
To use with 5/8”mic stands, simply remove the adapter.
Optimized for use with a wide variety of microphones, the SMT25 will work with
microphones having an OD (outer diameter) of .82” - 1.06” / 21 mm - 27 mm.
TO OPERATE
The microphone is held in place by the foam lined metal housing in the center of
the shockmount. To open up the diameter and insert microphone, squeeze the two
metal clips together between your thumb and fingers. (see Fig. 1)
The wingnut located at the bottom of the clip (see Fig. 2) will control the rotation of
the shockmount 180 degrees. Simply loosen (counter-clockwise) or tighten
(clockwise) the wingnut as needed.
INSTRUMENT MICROPHONES
The SMt25 is ideally suited for instrument condenser microphones such as the
ADX51, SCX1 and SCX25a — and a wide variety of other popular microphones on the
market. The SMT25 will hold the microphone securely in just about any position. With
condenser microphones, itis important that the element and all ports in the housings
and grills remain completely exposed.
VOCAL MICROPHONES
The SMT25 will also work with vocal microphones such as the OM series and the VX4
(pictured), and a wide variety of other popular microphones on the market. Since
vocal microphones tend to be larger in diameter (24-25mm on the average) they may
take a bit more finesse to intall. The mic may have to be worked into the housing by
carefully twisting the mic back and forth as you are pushing into position.
THE ULTIMATE RIM-MOUNT
GOOSENECK MIC HOLDER
SMT25
FEATURES
• Provides maximum isolation from vibration
• Heavy duty shock cord
• Metal wingnut locks holder into desired position
• Works with a wide variety of popular microphones
• Tension fit holds microphone firmly in place
FIG. 1:Squeeze together the metal
clips to open up the diameter of the
center metal tube.
FIG. 2: Wingnut will rotate the position
of the shockmount 180 degrees.
FIG. 3: VX-5 vocal microphone

ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
www.audixusa.com
503.682.6933 Fax: [phone]
Audix Corporation 9400 SW Barber St. Wilsonville, OR 97070
ver 2.0 12-15
PRODUCT REGISTRATION: Please register your product online at www.audixusa.com/docs_12/about/product_registration.shtml.
SERVICE AND WARRANTY: This product is under warranty for a period of 1 year to be free of defects in material and workmanship. In the event of a product failure due to materials or
workmanship, Audix will repair or replace said product at no charge with proof of purchase. Audix does not pay or reimburse shipping costs for warranty repairs or returns. The warranty excludes
any causes other than manufacturing defects, such as normal wear, abuse, environmental damage, shipping damage or failure to use or maintain the product per the supplied instructions. No
Implied Warranties: All implied warranties, including but not limited to implied warranties of merchantability and fitness for a particular purpose are hereby excluded. The liability of Audix, if
any, for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages
of any kind. Should your product fail in any way, please contact the Audix Service department at 503.682.6933. A Return Authorization is required before returning any product. OTHER THAN
THIS WARRANTY, AUDIX MAKES NO WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS, THE USE OF THE PRODUCTS, THE PERFORMANCE OF THE PRODUCTS. AUDIX SHALL
NOT BE LIABLE FOR SPECIAL INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE, USE, STORAGE OR DISPOSAL OF THE PRODUCTS, AUDIX’S
SERVICE WORK, BREACH OF WARRANTY, BREACH OF CONTRACT. NEGLIGENCE, OR ANY OTHER THEORY OF LIABILITY, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SMT25