August MS425 User manual

August International Ltd
United Kingdom
Telephone: [phone]
www.augustint.com
MS425
EN
FR
DE
IT
ES
Bluetooth Speaker
Haut-parleur Bluetooth
Bluetooth Lautsprecher
Altoparlante Bluetooth
Altavoz Bluetooth

Thank you for purchasing the August MS425 Bluetooth
Speaker. This user manual is designed to familiarize you
with all the features of this device. Please take time to read
this user manual carefully, even if you are already familiar
with a similar product. Please use this speaker at low
volume for the first 30 minutes to calibrate its membrane
and ensure optimum performance.
Safety
To ensure your safety and the safety of others, please ensure
you read the Safety Instructions before using this device.
Please do not open the MS425 by yourself. It can be unsafe
and will invalidate the manufacturer warranty.
Disposal
Please ensure the product and accessories are disposed in
compliance with WEEE (Waste Electrical and Electronic
Equipment) Directive and other regulations in your country.
Always check with the environmental agency and relevant
authority for disposal regulations.
Customer Service
You can contact: [phone] or email
[email protected] should you require technical support
and customer service.
User Manual
English
1. Safety Instructions
-1-
Storage and Use
Never expose
the
to moisture,
dust, oil or
smoke.
device
When carrying
this device as
part of your
luggage please
ensure it is
securely stored
to avoid
impact damage.
Never strike
or scratch this
device with
any sharp
object.
Keep this
device away
from
extreme
temperatures.
Keep the
device away
from wet or
damp
environment.
Avoid
dropping or
exposing to
impacts.
Maintenance
Please unplug all leads before cleaning this device.
Wipe the
device and
buttons with
a soft cloth.
Never wipe this
device with an
abrasive cloth
or apply
detergent,
alcohol or
chemical based
cleaning
products.
Alc ohol

4. Part Names and Functions
-2-
English
3. Accessories
1 2 3
USB charging cable 3.5mm audio cable User manual
2. Main Features
Wireless speaker for Bluetooth devices
Standard 3.5mm audio-in socket
Hands-free calls with microphone
Built-in rechargeable battery
Distance: up to 10m (Class II)
Version: Bluetooth V4.0
1 2 4 3 5 6 7 8 9
5. Bluetooth Connection
5.1 Connect to a Mobile Phone
1 ) Press and hold the Power button until the status LED flashes blue to
enter pairing mode.
2 ) Turn on your mobile phone and scan for Bluetooth devices. “MS425”
will be found. Select “MS425” to pair your mobile phone with the
device and confirm connection. (Code: 0000)
3 ) When successfully connected, the MS425 will say "Bluetooth" and
the status LED will light blue.
4 ) The MS425 automatically attempts to reconnect to the last paired
device after it is switched on. To disconnect and pair the MS425
with a new device, press and hold for 2 seconds to force the
MS425 into pairing mode.
-3-
1) Microphone
2) Previous Track
3) Next Track
4) Play/Pause/Answer
5) Status LED (blue in
Bluetooth mode; red in
Line-In mode)
6) Volume Control
7) Line In
8) Power Socket
9) Charging LED
10) Power Button
(Press and hold to
turn the device off
or on.)
/
Note:
Accessing Bluetooth settings on mobile phones varies for each phone,
to find the information for your phone, please refer to its user manual.
10
MS425
EN
FR
DE
IT
ES
Bluetooth S peaker
Haut-parleur Bluetooth
Blue tooth L autsp reche r
Altoparla nte Bluetoot h
Altavoz Blu etooth

English
1 )
enter pairing mode.
2 ) Enable the Bluetooth function on your computer. Select “Devices
and Printers” from the Control Panel and click “Add a device” to
start scanning for new devices. After the scan finishes, “Ms425”
will appear in the results.
3 ) Double click the “MS425” icon to connect to the speaker. The system
will install the MS425 driver automatically. (Code: 0000)
4 ) When successfully connected, the MS425 will say "Bluetooth" and
the status LED will light blue.
5 ) To output sound from your computer to the MS425, select “Sound”
from the Control Panel; then select the MS425 and click “Set Default”.
All sound from your computer will now be played by the MS425.
6 ) The MS425 automatically attempts to reconnect to the last paired
device after it is switched on. To disconnect and pair the MS425 with
a new device, press and hold for 2 seconds to force the MS425
into pairing mode.
Press and hold the Power button until the status LED flashes blue to
The MS425 is able to control the music playing on either a mobile phone
or a computer with a Bluetooth connection.
Use Volume Control on the MS425 to adjust volume.
Press or to select the previous or next track and press to
play/pause/resume.
Note:
These functions depend on the music player on your mobile phone or
computer.
<<
<<
Whilst connected to your mobile phone, the MS425 will act as a
hands-free system for any calls. Press on the MS425 to pick up or
hang up calls. Press and hold for 2 seconds to reject the incoming
call.
Plug the 3.5mm audio cable into the Line In socket. The MS425 will
enter Line In mode automatically. In Line In mode, the status LED is a
solid red.
Removing the audio cable will return the MS425 to Bluetooth mode
automatically.
To charge the MS425, connect the micro USB lead to the device’s power
socket, and the other end of the USB cable to a powered USB port.
The charging LED lights red whilst charging and turns off once the battery
is fully charged.
When the power is low, the MS425 gives a warning beep every 20 seconds.

-6-
11. Troubleshooting
Check the volume on both the
source device and the MS425.
Problem
Won't turn on.
Can't find the
MS425.
No sound.
Solution
Please charge the MS425.
Confirm the MS425 is in
searching mode and within
10 meters from the device.
3.5
90Hz-16KHz
61x60x58mm
Bluetooth V4.0
236g
-7-
The product must be correctly installed and operated in accordance
to the instructions given in this user manual.
The product must be used solely for domestic purposes.
The warranty only covers the main unit, and does not cover the
accessories.
The warranty does not cover the damage caused by misuse,
negligence, accident and natural disaster.
The warranty will be rendered invalid if the product is resold or
has been damaged by inexpert repairs. The manufactures disclaim
any liability for incidental or consequential damages.
Please consult our customer adviser before returning any product;
we are not responsible for any unexpected product returns.
Any faulty product must be kept and returned in the original
packaging with all the accessories and the original copy of the
purchase receipt.
Warranty
This product is guaranteed for twelve months from the date of the
original purchase. In the unlikely event of any defect arising due to
faulty materials or workmanship, the unit will be either replaced or
repaired free of charge (where possible) during this period. An
alternative product will be offered in case the product is no longer
available or repairable.
This warranty is subject to the following conditions:
The warranty is only valid within the country where the product
is purchased.
The warranty is in addition to, and does not diminish, your statutory
or legal rights.
Telephone: [phone]
Email: [e-mail]
Customer Service:

-8-
This product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. The declaration of
conformity may be consulted at August International Ltd, Unit 5 Swains
Mill, Crane Mead, Ware SG12 9PY, England.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device must accept
interference, including interference that may cause undesired operation
of the device.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
No Unauthorized Modifications: Do not make any changes or
modifications to this product without the prior express written approval
of August International Ltd. Any changes or modifications made
without express written approval could void the user’s authority to
operate this product.
For details of further relevant technical standards, please contact us at
the address above.