August MS625 User manual

August International Ltd
United Kingdom
Telephone: [phone]
www.augustint.com
MS625
®
Bluetooth Speaker Set
®
Ensemble d’Enceintes Bluetooth
®
Bluetooth Lautsprecher Set
®
Set di Altoparlanti Bluetooth
®
Set de Altavoces Bluetooth
EN
FR
DE
IT
ES

User Manual
-2-
-1-
English Français Deutsch Español
Quick Start Guide
MS625
Note: Before first use, please ensure that both speakers are fully
charged. To charge, use the power cable to connect both speakers to
a powered USB port. Whilst charging, the LED lights red and turns
off once fully charged.
Both speakers need to be paired to each other prior to pairing to a
source device.
1.Switch the secondary speaker on first.
2. Then switch the main speaker on. Once paired together, the
speakers will say "Bluetooth" and status LEDs will light blue
constantly.
3. To pair a source device, press and hold the multi-function switch
on the main speaker to enter pairing mode. In pairing mode the
status LED will flash blue.
4. Pair your source device with 'MS625' using its Bluetooth settings.
If you are unfamiliar with the Bluetooth feature of your source
device, refer to its user manual for detailed instructions.
5. Once successfully paired, the MS625 will say "Bluetooth" and the
status LEDs will light blue constantly.
Thank you for purchasing the August MS625 Bluetooth Speaker Set.
This user manual is designed to familiarize you with all the features
of this device. Please take the time to read this user manual carefully,
even if you are already familiar with a similar product.
Safety
To ensure the safety of you and others, please read the Safety
Instructions before using this device. Please do not disassemble this
product, it can be unsafe and will invalidate the manufacturer's
warranty.
Disposal
Please ensure the product and accessories are disposed of in
compliance with the WEEE (Waste Electrical and Electronic
Equipment) Directive and any other regulations applicable to your
country. Always check with the environment agency and any other
relevant authorities for current disposal regulations.
Customer Service
You can contact us by phone on: [phone] or by email at:
[e-mail] should you require further technical support
or customer service.
1. USB Charging Port
2. Audio in Socket
3. Multifunction Switch
4. Power Switch
Main (Left) Secondary (Right)
11
2344

Contents
Storage and Use
Do not expose
this device to
dust, oil or
smoke.
When transporting
this device store
securely to avoid
impact damage.
Do not scratch
this device with
sharp objects.
Do not store or
use this device
in extreme
temperatures.
Do not store or
use this device
in wet or damp
environments.
Do not drop
or strike this
device.
Maintenance
Please unplug all leads before cleaning this device.
Wipe the
device and
buttons with
a soft cloth.
Never wipe this
device with an
abrasive cloth
or apply
detergent,
alcohol or
chemical based
cleaning
products.
Al coho l
1. Safety Instructions
-4-
-3-
English Français Deutsch Español
1. Safety Instructions..................................................................4
2. Main Features.........................................................................5
3. Box Contents..........................................................................5
4. Part Names and Functions........................................................5
5. Operation...............................................................................6
5.1 Switch Speakers On/Off.....................................................6
5.2 Bluetooth Connection........................................................6
5.3 Volume and Track Control..................................................8
5.4 Audio In Mode...................................................................8
6. Charging.................................................................................9
7. Specification..........................................................................9
8. Troubleshooting....................................................................10
9. Warranty...............................................................................11

4. Part Names and Functions
-6-
-5-
3. Box Contents
2 3
Power cable
2. Main Features
1. USB Charging Port
2. Audio in Socket
3. Multifunction Switch
4. Power Switch
English
Wireless Audio from any Bluetooth Device
Low Latency Speakers for Stereo Sound on Your Home TV
Bluetooth Speaker to Speaker Connection
Audio-In Socket for Non Bluetooth Devices
Long Life Built-in Rechargeable Batteries
5. Operations
Main (Left) Secondary (Right)
11
2344
5.1 Switch Speakers On/Off
The power switch for both the main and secondary speaker is a slider
switch located on the rear of each unit.
5.2 Bluetooth Connection
Before first use, please ensure that both speakers are fully charged. To
charge, use the provided USB charging cable to connect both speakers to a
powered USB port. Whilst charging, the LED lights red and turns off once
fully charged.
Both speakers need to be paired to each other prior to pairing to a source
device.
1. Switch the secondary speaker on first.
2. Then switch the main speaker on. Once paired together, the speakers will
say "Bluetooth" and status LEDs will light blue constantly.
Note: After the speakers have paired with each other, the MS625 will enter
reconnection mode and will connect automatically to a previous known
device.
If two previously paired source devices are enabled within range and only
the main speaker is on, the main speaker will be connected to those two
source devices and this will prevent it pairing to the secondary speaker.
3. To pair to a new source device, press and hold the multi-function switch
on the main speaker to enter pairing mode. In pairing mode the status
LED will flash blue.
For mobile phones
1) Scan for available Bluetooth devices on your mobile phone (see your
mobile phone user manual for instructions if needed).
2) Select “MS625” from the available devices.
3) Once successfully paired and connected, the status LED will light
constant blue.
Note: Accessing Bluetooth settings on mobile phones varies for each
phone. To find the information for your phone, please refer to its user
manual.
3.5mm audio cable User manual
41
Speaker Set
MS62 5
®
Bluet ooth Spea ker Set
®
Ensem ble d’Enc eintes Bluet ooth
®
Bluetooth L autsp recher Set
®
Set di Altoparlanti Bluetooth
®
Set de Alta voces Blueto oth
EN
FR
DE
IT
ES

English
-8-
-7-
5.3 Volume and Track Control
5.3.1 Volume Control
To adjust the volume either slide and hold the multifunction switch to
the left or right or adjust the volume on your source device.
For computers
1) Enable the Bluetooth function on your computer.
2) Select “Devices and Printers” from the Control Panel and click “Add a
Device”.
3) Select “MS625” from the available devices, the system will install the
driver automatically.
4) Once successfully paired and connected, the status LED will light
constant blue.
For a TV or Set-Top Box with Integrated Bluetooth Connection
1) Scan for available Bluetooth devices on your TV or Set-Top Box (see
your TV or Set-Top Box user manual for instructions if needed).
2) Select “MS625” from available devices.
3) Once successfully paired and connected, the status LED will light
constant blue.
For TV with No Bluetooth Connection
To connect to a TV or Set-Top box without a Bluetooth connection, you
will require a Bluetooth Transmitter such as the August MR250.
1) Plug the transmitter into the headphone socket of your TV.
2) Switch the transmitter on and enter pairing mode (for more
information, please refer to the transmitter user manual). Please ensure
that no other Bluetooth device is available for pairing nearby.
3) The transmitter will automatically pair with the MS625. Once
successfully paired and connected, the status LED will light constant
blue.
Note: the compatibility of third party transmitters with the MS625
cannot be guaranteed.
5.3.2 Track Control
To control the track slide the multifunction switch to the left or right to
skip or repeat track. Press the multifunction switch to play or pause
playback.
Note: Volume and track control require A2DP on your source device,
please refer to its user manual to see if it has A2DP.
5.4 Audio In Mode
To use the MS625 with a non-Bluetooth source device, connect the
source device to the main speaker audio in socket using the provided
3.5mm audio cable. Once connected the LED on the main speaker will
light red.
6. Charging
To charge the MS625, connect the micro USB lead to the device power
sockets, and the other end of the power cable to a powered USB port.
The LED lights red whilst charging and turns off once the battery is
fully charged.

-10-
-9-
English
About 5 hours
7. Specification
30 Days
Bluetooth v4.2, APTX, APTX-LL
A2DP, AVRCP
Up to 10m (Class 2)
Up to 5m
90Hz – 20KHz
5W x 2
≥80dB
≤1.0% at 1kHz
3.7V/1600mAh Built-in
Lithium Battery
About 15 hours
Bluetooth Specification
Bluetooth Profile
Operating Range
Operating Range
between speakers
Frequency Response
Speaker Output
SNR
Distortion
Battery
Working Time
Charging Time
Standby Time
260g
106.5 x 74 x 69.4mm
Weight of each speaker
Dimensions
8. Troubleshooting
Update the driver of the Bluetooth module
on your computer
Problem
Speakers will not
switch on
MS625 not found by
source device
Windows does not
install the MS625
driver
Solution
Please charge the MS625
Confirm the MS625 is in pairing status and
within 10 meters from the device.
Intermittent sound
quality in Bluetooth
mode
Disable other Bluetooth devices in the
area and/or switch off WiFi on your source
device.
No Sound Check the volume on both source device
and MS625
Can not connect to
Bluetooth on
Windows XP or Vista
Can not connect to
Bluetooth on
Windows 7+
Third party software may be required,
please contact the manufacturer of your
Bluetooth chip for more information
Download all updates for Windows and
your Bluetooth driver, these may need to
be manually downloaded from the
Bluetooth chips manufacturers website
The main and
secondary speakers
cannot be paired.
Turn off both speakers and the Bluetooth on
the source devices. Turn on the secondary
speaker first then turn on the main speaker.
The source device
cannot pair to the
main speaker.
Disable other source devices then select the
'MS625' from Bluetooth list on the wanted
device.
Press and hold the multi-function switch on
the main speaker to enter pairing mode.
Qualcomm® aptX™ audio is a product of Qualcomm Technologies
International, Ltd.
Qualcomm is a trademark of Qualcomm Incorporated, registered in
the United States, and other countries, used with permission. aptX is
a trademark of Qualcomm Technologies International, Ltd.

English
-12-
-11-
This product is guaranteed for twelve months from the date of the original
purchase. In the unlikely event of any defect arising due to faulty materials
or workmanship, the unit will be either replaced or repaired free of charge
(where possible) during this period. An alternative product will be offered
in case the product is no longer available or repairable.
This warranty is subject to the following conditions:
The warranty is only valid within the country where the product is
purchased.
The product must be correctly installed and operated in accordance to
the instructions given in this user manual.
The product must be used solely for domestic purposes.
The warranty only covers the main units, and does not cover the
accessories.
The warranty does not cover the damage caused by misuse, negligence,
accident and natural disaster.
The warranty will be rendered invalid if the product is resold or has
been damaged by inexpert repairs. The manufactures disclaim any
liability for incidental or consequential damages.
Please consult our customer adviser before returning any product; we are
not responsible for any unexpected product returns.
Any faulty product must be kept and returned in the original packaging
with all the accessories and the original copy of the purchase receipt.
The warranty is in addition to, and does not diminish, your statutory or
legal rights.
Customer Service:
Telephone: [phone]
Email: [email protected]
9.Warranty This product is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. The declaration of conformity
may be consulted at August International Ltd, Rawmec Business Park,
Plumpton Road, Hoddesdon, EN11 0EE, United Kingdom.
Industry Canada Statement
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept
interference, including interference that may cause undesired operation of
the device.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
No Unauthorized Modifications: Do not make any changes or
modifications to this product without the prior express written approval of
August International Ltd. Any changes or modifications made without
express written approval could void the user’s authority to operate this
product.
For details of further relevant technical standards, please contact us at the
address above.