Aura CATALINA User manual

CATALINA SECTIONAL
CORNER CHAIR
ASSEMBLED CORNER CHAIR
KIT CONTENTS
GL66379-20 - ASSEMBLY INSTRUCTIONS - NOVEMBER 2020 IG-CATC-BS
NOTE: CUSHIONS SOLD SEPARATELY
A. Short Leg
B. Left Leg
C. Corner Leg
D. Right Leg
E. Seat Assembly
F. Left Backrest
G. Right Backrest
H. Metal Bracket
I.
1
⁄ 2 " Screw (4)
J. 2" Screw (6)
K. Lag Screw (4)
L. Washer (4)
A
B
E
F
H
G
C
D
J
I
K
J
K
L
The following instruction manual will assist you with the assembly of your virtually maintenance free Catalina Sectional Corner Chair.
DO NOT DRAG PRODUCT ON ABRASIVE SURFACES. Always use protective safety equipment where required (e.g. eyewear).
TOOLS REQUIRED: Adjustable wrench, screwdriver with #2 square bit. Use of power drill suggested.

STEP 1
Attach the Short Leg (A) to the Seat
Assembly (E) with a Lag Screw (K)
and Washer (L).
A
E
L
K
STEP 2
Turn the assembly over and
attach the three remaining legs
(B, C, & D) with the three Lag
Screws (K) and Washers (L).
PLEASE NOTE The location and
orientation of each leg as shown.
TURN CHAIR
OVER
B
C
D
L
K
STEP 3
Attach the Left and Right
Backrests (F&G) together with
the Metal Bracket (H) and four
1/2" screws (I).
STEP 4
Turn the assembled backrest over
and attach to the tops of the legs
with the six 2" screws (J).
F
G
I (x4)
H
J (x6)
x3
For more information on our Aura™ collection of outdoor furniture products,
email us at [email protected] or visit us at our website: www.auraoutdoorliving.com