Aurora THE ELEMENTAL SUSPENDED FIRE User manual

www.aurorasuspendedres.com
[phone] | 4/1 Simmons Street | Ballina NSW 2478, Australia
INSTALLATION
AND USER MANUAL
THE ELEMENTAL SUSPENDED FIRE
Bioethanol

2

CONTENTS
1. PLANNING
INTRODUCTION 6
CLEARANCE TO COMBUSTIBLES 7
2. DIMENSIONS & SPECIFICATIONS
FEATURES, WEIGHTS AND DIMENSIONS 10
3. INSTALLATION
SUSPENSION BRACKET 14
LOWER FLUE 16
FIREBOX 18
BIOETHANOL FIREPLACE 19
FOR INSTALLERS 20
INSTALLATION CHECKLIST 21
We would like to thank you for your purchase of an Aurora Suspended Fire.
The care and crasmanship we put into each re will give you trouble free
heang for many years to come.

4

1.
PLANNING

INSTALLATION AND USER MANUALPLANNING
1
6
For your safety, ensure you have read the
operaon guidelines prior to use. Your re
must be installed by a qualied professional.
Refer to our website for assistance nding
an installer in your area:
aurorasuspendedres.com/planning-custom-
er-support/faq/
INSTALLATION PROCESS
1. Choose the posion of rebox and
ue ensuring that you follow the
clearances described within this
secon.
2. Install the suspension bracket
3. Install the lower ue
4. Engage the rebox
5. Fit the blanking plate to cover the
opening in the ue
6. Fit the washers and nuts to secure
the rebox
!Mixing of appliance or ue-system
components from dierent sources or
modifying the dimensional specicaon
of components may result in hazardous
condions. Where such acon is
considered, Aurora res should be
consulted in the rst instance.
INTRODUCTION

AURORA SUSPENDED FIRES
7
A combusble surface is anything that can burn (i.e.
plaster, wall paper, wood, fabrics etc.) These surfaces
are not limited to those that are visible, but also include
materials that are behind non-combusble material. Timber
frames behind gyprock are considered combusble.
IMPORTANT
Window frames must also be considered. Timber
window frames must be treated as combusble surfaces.
Aluminium frames can be treated as non-combusble
The rebox or ue must be a minimum of 100mm away
from combusble or non-combusble materials.
CLEARANCE
TO COMBUSTIBLES
WALL
MINIMUM 100MM
MINIMUM 100MM
FIREBOX
FLUE
WALL

2.
DIMENSIONS
& SPECIFICATIONS

INSTALLATION AND USER MANUAL
10
FEATURES
·Material: 3mm Steel
· Finish: high temperature
coang system
·Heat Output: 3.4kW
· Colour: mae black
(A range of other colours are
available on request. For more
informaon visit our website.)
THE ELEMENTAL
2DIMENSIONS & SPECIFICATIONS
Firebox length 950mm
Firebox width 360mm
Firebox height 440mm
Firebox weight 80kgs
Flue weight 15kg/m
WEIGHT & DIMENSIONS
HEIGHT ADJUSTED TO SUIT
440
350
360
950
550 550

AURORA SUSPENDED FIRES
11
CEILING BRACKET
FLUE
FIREBOX

3.
INSTALLATION

14
25MM MINIMUM CLEARANCE25MM MINIMUM CLEARANCE
25MM
CEILING COVER PLATE
SUPPORT TO SPAN
ACROSS CEILING JOISTS
FLUE CAP IN THE TOP
OF THE FLUE
THE LARGEST SQUARE
SECTION MUST PROTRUDE
DOWN FROM THE CEILING A
MINIMUM 25MM UNLESS THE
CEILING IS MADE FROM A
NON-COMBUSTIBLE MATERIAL
SUCH AS CONCRETE
CEILING
FLAT CEILING INSTALLATION:
The bracket must be structurally secured within the roof, as shown on the diagram.
The large square body of the ceiling bracket must protude down through the  nished
ceiling level by a minimum of 25mm.
You must leave a 25mm clearance gap between the bracket and the ceiling. The gap
will be covered by the ceiling cover plate.
SUSPENSION BRACKET
FLUE

AURORA SUSPENDED FIRES
15
PITCHED CEILING INSTALLATION
Custom Made
For pitched ceilings we have 5 bracket sizes which your
installer will adjust to achieve the exact angle for your
installaon.
· Up to a 5 degree pitch = Flat bracket
· 5 to 15 degree pitch = 10 degree bracket
· 15 to 25 degree pitch = 20 degree bracket
· 25 to 35 degree pitch = 30 degree bracket
· 35 to 45 degree pitch = 40 degree bracket
A custom bracket is available for anything larger than a
45 degree pitch. When installing the bracket, it is very
important that the bracket is sing plumb.
The installer may need to chock up one side of the bracket,
with non combusble material i.e. cement sheet.
»
CEILING BRACKET
CEILING COVER PLATE
LOWER FLUE

INSTALLATION AND USER MANUAL
16
3INSTALLATION
LOWER FLUE LENGTHS
We supply the lower ue in the standard sizes listed
below. The extra length will be pushed up into the ceiling
bracket, enabling you to set the correct distance of the
rebox to the oor.
FLUE LENGTHS
INSTALLING A TWO PIECE LOWER FLUE
Lower ues over 3 metres are supplied in two parts and are
joined internally with a ue connector. This assists installers
in achieving a safe and successful installaon.
Do not aempt to join these prior to aaching to the
suspension bracket.
1. Aach the upper piece to the suspension
bracket rst.
2. When this is in place aach the lower part.
Sizes above 3m will come
in two pieces, with an
internal joiner.
1.6m 2.5m
1.8m 2.75m
2.0m 3.0m
2.25m
LOWER FLUE

AURORA SUSPENDED FIRES
17
INSTALLING THE INTERNAL LOWER FLUE
The lower ac ve  ue is delivered with addi onal length to
allow for small changes to set the correct  rebox height.
1. First posi on the lower  ue inside the suspension
bracket 900mm from the  oor.
2. Once the 900mm height is achieved  ghten the
8 grub screws. Use a level to ensure that the  ue
is perfectly ver cal.
GRUB SCREWS ONCE
THE 8 GRUB SCREWS
ARE TIGHTENED, THE
LOWER FLUE IS SECURE
AND WILL NOT MOVE
LOWER FLUE INSERTED
MINUMUM 200MM FROM
BOTTOM OF CONNECTOR
CEILING BRACKET
CONNECTOR
MINIMUM 200MM
900MM
FLOOR

INSTALLATION AND USER MANUAL
18
FIREBOX
3INSTALLATION
ENGAGING THE FIREBOX
1. Ensure the lower ue is the correct height from the oor
2. Use a jacking trolley to li the rebox evenly onto the 4 xing bolts
3. Fit the blanking plate to cover the opening in the ue
4. Fit the washers and nuts and ghten, to secure the rebox

AURORA SUSPENDED FIRES
19
3
The Elemental replace is ed with an EcoSmart XL500
burner which uses bioethanol fuel.
As bioethanol gives o nothing but water vapour there is
no need for an external ue. The lower acve ue will be
blanked inside the rebox.
BIOETHANOL FIREPLACE

INSTALLATION AND USER MANUAL
20
3INSTALLATION
CLEANING UP
If the re paint has accumulated dust, ngerprints or other
residue during installaon Wipe the rebox and lower ue
down with a lile water and a scratch free glass polishing
cloth. Use a light spray of WINDEX if required.
DO NOT RUB THE PAINT. A LIGHT PRESSURE IS ALL
THAT IS NEEDED.
HANDING OVER CHECKLIST
Read the Users instrucons and instruct the user on
the operaon of the replace and cleaning methods.
Leave instrucons with the customer.
Inform the customer that any odours are due to
the newness of materials and will disperse aer the
inial burn instrucons are followed.
Advise the customer on the importance of an
adequate air supply.
FOR INSTALLERS