AUSTRALIAN MONITOR Synergy SY400 User manual

Unlike most amplifiers in this price bracket, the
Synergy Series does sound exceptionally good —
please compare!
• It is very reliable
• It is very well constructed
• It features in-built clip limiting
• Ground Lift Facility
• Twin fans for efficient cooling
• It is genuinely suitable for installations and hire applications
• Industry standard XLR inputs and spea on/binding post outputs
4 MOD LS AVAILABL
SY400 200 + 200 watts @ 4 ohms
SY800 380 + 380 watts @ 4 ohms
SY1200 600 + 600 watts @ 4 ohms
SY1600 800 + 800 watts @ 4 ohms
The Australian Monitor Synergy Series is aptly named.
Ta ing from one side our years of experience in the
touring and hire mar ets, and from the other our years
of experience in the installation mar et, we have com-
bined our experiences to create a high performance,
low cost amplifier worthy of installations and hire.
An extensive mar et survey showed that whilst the
lower cost amplifier mar et is growing, most people
were not satisfied with the end product. In many
cases the sound quality was very poor and very few
people bought the same amplifier twice, constantly
loo ing for a better performing amplifier that offered
exceptional value for money.
We have the solution.
The Synergy Series has been a long term development
project. We have not rushed anything and we have
spent a lot of time and money getting it right.

AUTHORISED DEALER:
AUDIO TELEX COMMUNICATIONS PTY LTD
NSW: Tel: [phone] Fax: [phone] VIC: Tel: [phone] Fax: [phone]
QLD: Tel: [phone] Fax: [phone] WA: Tel: [phone] Fax: [phone]
SA: Tel: [phone] Fax: [phone] NZ: Tel: [phone] Fax: [phone]
I ter atio al Sales Co tact: i ter atio [e-mail]
Website: www.australia mo itor.com.au
SPECIFICATIONS SY400 SY800 SY1200 SY1600
Power Per Cha el @ 4 ohms, 0.05%THD 200w 375w 600w 800w
Bridge Power @ 8 ohms 400w 750w 1200w 1600w
Freque cy Respo se <±0.1dB 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz 20Hz-20kHz
Distortio (@4ohms) THD @ 1kHz 0.05% 0.05% 0.05% 0.05%
Slew Rate 30Vus 30Vus 30Vus 30Vus
Dampi g Factor @ 8 ohms >375 >375 >375 >375
Sig al To Noise ‘A’ Weighted >100dB >100dB >100dB >100dB
Shippi g Weight 12kg 15kg 17kg 20kg
Dime sio s HxWxD (mm) 87x482x400 87x482x400 87x482x450 87x482x450
FIVE SOLID LEVELS OF PROTECTION
• Overload • Output Short Circuit • Thermal • Output DC Protectio • Slow Start Facility
FIVE STAGE INDICATION
• Power • Status/Clip (L/R) • Overload • Thermal • Fault