AUSTRALIAN MONITOR SM12 User manual

Pro Product SM Mixers
SM12
The Australian Monitor Pro Series SM12 & SM16 mixing consoles
are a compact design & provide ultra low noise operation.
With a mixture of mono channels featuring balanced XLR or TRS
inputs & switchable 48V phantom power, & stereo channels all
boasting 3 stage EQ & pre & post fader auxiliary sends the SM
series mixers are as versatile as they are cost effective.
The SM series mixers feature peak LED indication & low cut
filters on all mono channels, high quality 60mm faders & sealed
potentiometers, 19 inch rack mount kit & accurate 10 segment
bar graph meters for the stereo output bus.
The Australian Monitor Pro Series SM12 & SM16 give the
audio professional a sonically superior mixing console offering
a feature set & versatility usually found in mixing consoles many
times their price.
SM12 features 4 mono channels & 4 stereo channels while the
SM16 features 8 mono channels & 4 stereo channels.

* For shipping weights and dimensions see back page
SM16
Mono Channels Features include;
• Balanced XLR & 6.35mm
TRS inputs.
• High pass filter
• Input gain control
• 3 stage equalization
• Pre fader & Post fader Aux sends
• Peak LED indication
• Pan control
• Pre Fader Listen
• Insert point
• 48 volt phantom power
Stereo Channel features include;
• Dual 6.35mm TRS line inputs
• 3 stage equalization
• Pre fader & post fader Aux sends
• Peak LED indication
• Stereo pan control
• Pre Fader Listen
The SM series mixers also include;
• 2 Stereo Auxiliary returns
• Tape input
• Record output
• Headphone output
• Local Monitor output
• 10 segment Bar Graph peak meters
for the Master stereo output bus
• Balanced XLR & 6.35mm TRS
Master stereo outputs

Contr
Specifications
MONO INPUTS
Mic Input Electronically balanced, discrete input configuration
Bandwidth 10Hz to 60kHz + 3dB
Distortion (THD & N) 0.01% at +4dBu, 1kHz, Bandwidth 80kHz
Mic E.I.N. (22Hz - 22kHz) -129.5dBu, 150 source
-117.3dBqp, 150 source
-132.0dBu, input shorted
-122.0dBqp, input shorted
GAIN range +10dB to +60dB
Line Input Electronically balanced
Bandwidth 10Hz to 60kHz + 3dB
Distortion (THD & N) 0.01% at +4dBu, 1kHz, Bandwidth 80kHz
Line Level Range +10dBu to -40dBu
Equalisation
Hi Shelving 12kHz + 15dB
Mid Range 2.5kHz + 15dB
Lo Shelving 80Hz + 15dB
STEREO INPUTS
Line Input Unbalanced
Bandwidth 10Hz to 55kHz + 3dB
Distortion (THD & N) 0.01% at +4dBu, 1kHz, Bandwidth 80kHz
Equalisation
Hi Shelving 12kHz + 15dB
Mid Range 2.5kHz + 15dB
Lo Shelving 80Hz + 15dB
MASTER MIX SECTION
Max. Output +22dBu Balanced
Aux. Send Max. Out +22dBu Unbalanced
Control Room Out +22dBu Unbalanced
Signal-to-Noise Ratio 112dB, all channels at Unity Gain
POWER SUPPLY (mains voltages)
Europe/Australia 230VAC, 50Hz, power supply unit SMPS (included)
Engineered and Distributed by
Audio Telex Communications Pty Ltd ABN 78 001 345 482
149 Beaconsfield Street, Silverwater, Sydney NSW 2128, Australia
NSW Tel [phone] Fax [phone] VIC Tel [phone] Fax [phone]
QLD Tel [phone] Fax [phone] SA Tel [phone] Fax [phone]
WA Tel [phone] Fax [phone] NZ Tel [phone] Fax [phone]
International Enquiries: inter[email protected] • Website: www.australianmonitor.com.au
PHYSICAL
SM12
Dimensions (H x W x D) 70mm x 293mm x 344mm
Net Weight 3.6kg (PSU not included)
Gross Weight 5.8kg
SM16
Dimensions (H x W x D) 70mm x 399mm x 344mm
Net Weight 5kg (PSU not included)
Gross Weight 8.0kg
SHIPPING DIMENSIONS
SM12
Dimensions (H x W x D) 120mm x 390mm x 430mm
SM16
Dimensions (H x W x D) 130mm x 390mm x 540mm