Autodesk 3ds Max User manual
Autodesk®
3ds Max®
Design 2009
Shortcut Guide
Autodesk®
3ds Max®
2009
©2008 Autodesk, Inc. All rights reserved. Except as otherwise permitted by Autodesk, Inc., this publication, or parts thereof, may not be
reproduced in any form, by any method, for any purpose.
Certain materials included in this publication are reprinted with the permission of the copyright holder.
Portions Copyright ©2005 Microsoft Corporation. All rights reserved.
Portions Copyright Max HTR created 2003-2005 by Motion Analysis.
REALVIZ Copyright ©2006 REALVIZ S.A. All rights reserved.
Portions of this software JSR-184 Exporter Copyright ©2004 Digital Element, Inc.
JPEG software is copyright ©1991-1998, Thomas G. Lane. All Rights Reserved. This software is based in part on the work of the Independent
JPEG Group.
Portions Copyright ©2005 Blur Studio, Inc.
Portions Copyright ©1999-2005 Joseph Alter, Inc. Credit to Joe Alter, Gonzalo Rueda, and Dean Edmonds.
Certain patents licensed from Viewpoint Corporation.
This product includes Radiance software (http://radsite.lbl.gov/radiance) developed by the Lawrence Berkeley National Laboratory
(http://www.lbl.gov). Copyright ©1990-2005. The Regents of the University of California through Lawrence Berkeley National Laboratory. All
rights reserved.
Portions Copyright ©1990-2007 Info-ZIP. All rights reserved.
For the purposes of this copyright and license, "Info-ZIP" is defined as the following set of individuals: Mark Adler, John Bush, Karl Davis, Harald
Denker, Jean-Michel Dubois, Jean-loup Gailly, Hunter Goatley, Ed Gordon, Ian Gorman, Chris Herborth, Dirk Haase, Greg Hartwig, Robert Heath,
Jonathan Hudson, Paul Kienitz, David Kirschbaum, Johnny Lee, Onno van der Linden, Igor Mandrichenko, Steve P. Miller, Sergio Monesi, Keith
Owens, George Petrov, Greg Roelofs, Kai Uwe Rommel, Steve Salisbury, Dave Smith, Steven M. Schweda, Christian Spieler, Cosmin Truta,
Antoine Verheijen, Paul von Behren, Rich Wales, Mike White. This software is provided "as is," without warranty of any kind, express or implied.
In no event shall Info-ZIP or its contributors be held liable for any direct, indirect, incidental, special or consequential damages arising out of
the use of or inability to use this software. Permission is granted to anyone to use this software for any purpose, including commercial applications,
and to alter it and redistribute it freely, subject to the above disclaimer and the following restrictions: 1) Redistributions of source code (in whole
or in part) must retain the above copyright notice, definition, disclaimer, and this list of conditions. 2) Redistributions in binary form (compiled
executables and libraries) must reproduce the above copyright notice, definition, disclaimer, and this list of conditions in documentation and/or
other materials provided with the distribution. The sole exception to this condition is redistribution of a standard UnZipSFX binary (including
SFXWiz) as part of a self-extracting archive; that is permitted without inclusion of this license, as long as the normal SFX banner has not been
removed from the binary or disabled. 3) Altered versions--including, but not limited to, ports to new operating systems, existing ports with new
graphical interfaces, versions with modified or added functionality, and dynamic, shared, or static library versions not from Info-ZIP--must be
plainly marked as such and must not be misrepresented as being the original source or, if binaries, compiled from the original source. Such
altered versions also must not be misrepresented as being Info-ZIP releases--including, but not limited to, labeling of the altered versions with
the names "Info-ZIP" (or any variation thereof, including, but not limited to, different capitalizations), "Pocket UnZip," "WiZ" or "MacZip" without
the explicit permission of Info-ZIP. Such altered versions are further prohibited from misrepresentative use of the Zip-Bugs or Info-ZIP e-mail
addresses or the Info-ZIP URL(s), such as to imply Info-ZIP will provide support for the altered versions. 4) Info-ZIP retains the right to use the
names "Info-ZIP," "Zip," "UnZip," "UnZipSFX," "WiZ," "Pocket UnZip," "Pocket Zip," and "MacZip" for its own source and binary releases.
Portions relating toOpenEXR Bitmap I/O Plugin ©2003-2005 SplutterFish, LLC.
Portions relating to OpenEXR ©2003 Industrial Light and Magic a division of Lucas Digital Ltd. LLC.
Portions relating to Zlib ©1995-2004 Jean-loup Gaily and Mark Alder
Portions Copyright ©2000-2005 Size8 Software, Inc.
Portions Copyright ©1988-1997 Sam Leffler.
Portions Copyright ©1991-1997 Silicon Graphics, Inc. Permissions to use, copy, modify, distribute, and sell this software and its documentation
for any purpose is hereby granted without fee, provided that (i) the above copyright notices and this permission notice appear in all copies of
the software and related documentation, and (ii) the names of Sam Leffler and Silicon Graphics may not be used in any advertising or publicity
relating to the software without the specific, prior written permission of Sam Leffler and Silicon Graphics.
Portions Copyright ©2006 IntegrityWare, Inc.
Portions ©Copyright 1999-2005 Havok.com Inc. (or its licensors). All Rights Reserved. See http://www.havok.com for details.
Portions Copyright ©MAX2Obj and Obj2Max created 1996-2001 by Harald A. Blab.
Portions developed by Digimation, Inc. for the exclusive use of Autodesk, Inc.
Portions Copyright 1998-2003 by Neil Hodgson. All Rights Reserved. Permission to use, copy, modify, and distribute this software and it
documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both
that copyright notice and this permission notice appear in supporting documentation.
Portions of this software, Point Cache 2 are copyright ©2005-2006 Blizzard Entertainment, Inc.
Portions Copyright ©2003 ATI Technologies, Inc. All Rights Reserved. Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and derivative
works and that both the copyright notice and this permission notice appear in support documentation, and that the name of ATI Technologies,
Inc. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.
Portions Copyright ©1994 F. Kenton Musgrave.
Portions of this software are Copyright ©1991-1994 by Arthur D. Applegate. All Rights Reserved. No part of this source code may be copied,
modified or reproduced in any form without retaining the above copyright notice. This source code, or source code derived from it, may not
be redistributed without express written permission of the author.
Portions Copyright ©1995, 1996 Guy Eric Schalnat, Group 42, Inc.
Portions Copyright ©1996, 1997 Andreas Dilger.
Portions Copyright ©1989, 1991, 1993 Aladdin Enterprises. All rights reserved.
Portions Copyright ©1999, 2000 NVIDIA Corporation. This file is provided without support, instructions or implied warranty of any kind. NVIDIA
makes no guarantee of its fitness for a particular purpose and is not liable under any circumstances for any damages or loss whatsoever arising
from the use or inability to use this file or items derived from it.
Portions Copyright ©2006 NVIDIA Corporation.
Portions Copyright 1990-1991 by Thomas Knoll. Copyright 1992-1995 by Adobe Systems, Inc.
Portions Copyright 1993-1996, Adobe Systems, Incorporated. All rights reserved worldwide.
This software contains source code provided by mental images GmbH.
Portions Copyright Guruware OBJio ©2007 http://www.guruware.at
Portions Copyright Orbaz Technologies ©2007
Portions Copyright Mathew Kaustinen ©2007
Trademarks
The following are registered trademarks or trademarks of Autodesk, Inc., in the USA and other countries: 3DEC (design/logo), 3December,
3December.com, 3ds Max, ActiveShapes, Actrix, ADI, Alias, Alias (swirl design/logo), AliasStudio, Alias|Wavefront (design/logo), ATC, AUGI,
AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Extension, AutoCAD SQL Interface, Autodesk, Autodesk
Envision, Autodesk Insight, Autodesk Intent, Autodesk Inventor, Autodesk Map, Autodesk MapGuide, Autodesk Streamline, AutoLISP, AutoSnap,
AutoSketch, AutoTrack, Backdraft, Built with ObjectARX (logo), Burn, Buzzsaw, CAiCE, Can You Imagine, Character Studio, Cinestream, Civil
3D, Cleaner, Cleaner Central, ClearScale, Colour Warper, Combustion, Communication Specification, Constructware, Content Explorer,
Create>what's>Next> (design/logo), Dancing Baby (image), DesignCenter, Design Doctor, Designer's Toolkit, DesignKids, DesignProf, DesignServer,
DesignStudio, Design|Studio (design/logo), Design Your World, Design Your World (design/logo), DWF, DWG, DWG (logo), DWG TrueConvert,
DWG TrueView, DXF, EditDV, Education by Design, Exposure, Extending the Design Team, FBX, Filmbox, FMDesktop, Freewheel, GDX Driver,
Gmax, Heads-up Design, Heidi, HOOPS, HumanIK, i-drop, iMOUT, Incinerator, IntroDV, Inventor, Inventor LT, Kaydara, Kaydara (design/logo),
LocationLogic, Lustre, Maya, Mechanical Desktop, MotionBuilder, Mudbox, NavisWorks, ObjectARX, ObjectDBX, Open Reality, Opticore,
Opticore Opus, PolarSnap, PortfolioWall, Powered with Autodesk Technology, Productstream, ProjectPoint, ProMaterials, Reactor, RealDWG,
Real-time Roto, Recognize, Render Queue, Reveal, Revit, Showcase, ShowMotion, SketchBook, SteeringWheels, StudioTools, Topobase, Toxik,
ViewCube, Visual, Visual Bridge, Visual Construction, Visual Drainage, Visual Hydro, Visual Landscape, Visual Roads, Visual Survey, Visual Syllabus,
Visual Toolbox, Visual Tugboat, Visual LISP, Voice Reality, Volo, Wiretap, and WiretapCentral.
The following are registered trademarks or trademarks of Autodesk Canada Co. in the USA and/or Canada and other countries: Backburner,
Discreet, Fire, Flame, Flint, Frost, Inferno, Multi-Master Editing, River, Smoke, Sparks, Stone, and Wire.
All other brand names, product names or trademarks belong to their respective holders.
Disclaimer
THIS PUBLICATION AND THE INFORMATION CONTAINED HEREIN IS MADE AVAILABLE BY AUTODESK, INC. "AS IS." AUTODESK, INC. DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE REGARDING THESE MATERIALS.
Main UI
Adapve Degradaon Toggle O
Advanced LIghng Panel (Scanline) 9
Align Alt + A
Angle Snap Toggle A
Auto Key Mode Toggle N
Background Lock Toggle Alt + Ctrl + B
Backup Time One Unit , (comma)
Boom View B
Camera View C
Clone Ctrl + V
Close Last Acvated Explorer Alt + Ctrl + P
Cycle Acve Snap Type Alt + S
Cycle Selecon Method Ctrl + F
Cycle Snap Hit Alt + Shi + S
Default Lighng Toggle Ctrl + L
Disable Viewport D
Display as See-Through Toggle Alt + X
Environment Dialog Toggle 8
Expert Mode Toggle Ctrl + X
Fetch Alt + Ctrl + F
Forward Time One Unit . (period)
Front View F
Go to End Frame End
Go to Start Frame Home
Hide Cameras Toggle Shi + C
Hide Geometry Toggle Shi + G
Hide Grids Toggle G
Hide Helpers Toggle Shi + H
Hide Lights Toggle Shi + L
Hide Parcle Systems Toggle Shi + P
Hide Shapes Toggle Shi + S
Hide Space Warps Toggle Shi + W
Hold Ctrl + H
Le View L
Lock User Interface Toggle Alt + 0
Material Editor Toggle M
Maximize Viewport Toggle Alt + W
MAXScript Listener F11
New Scene Ctrl + N
Normal Align Alt + N
Open File Ctrl + O
Orbit View Mode Ctrl + R
Orthographic User View U
Pan View Ctrl + P
Pan Viewport I
Percent Snap Toggle Shi + Ctrl + P
Perspecve User View P
Play Animaon / (slash)
Quick Align Shi + A
Redo Scene Operaon Ctrl + Y
Redo Viewport Operaon Shi + Y
Redraw All Views ` (grave accent)
Render Shi + Q
Render Last F9
Render Setup F10
Restrict Plane Cycle F8
Restrict to X F5
Restrict to Y F6
Restrict to Z F7
Save File Ctrl + S
Scale Cycle Ctrl + E
Select All Ctrl + A
Select Ancestor Page Up
Select and Move W
Select and Rotate E
Select By Name H
Select Child Page Down
Select Children Ctrl + Page Down
Select Invert Ctrl + I
Select None Ctrl + D
Select Similar Ctrl + Q
Selecon Lock Toggle Space
Set Key Mode ' (apostrophe)
Set Keys K
Shade Selected Faces Toggle F2
Show Floang Dialogs Ctrl + ` (grave accent)
Show Main Toolbar Toggle Alt + 6
Show Safeframes Toggle Shi + F
Show Selecon Bracket Toggle J
Show Stascs Toggle 7
Snap To Frozen Objects Toggle Alt + F2
Snaps Toggle S
Snaps Use Axis Constraints Toggle Alt + D, Alt + F3
Sound Toggle \ (backslash)
Spacing Tool Shi + I
Spot/Direconal Light View Shi + 4
Sub-object Level 1 1
Sub-object Level 2 2
Sub-object Level 3 3
Sub-object Level 4 4
Sub-object Level 5 5
Sub-object Level Cycle Insert
Sub-object Selecon Toggle Ctrl + B
Top View T
Transform Gizmo Size Down - (minus)
Transform Gizmo Size Up = (equals)
Autodesk 3ds Max 2009 and Autodesk 3ds Max Design 2009 Shortcut Guide
Transform Gizmo Toggle X
Transform Type-In Dialog Toggle F12
Undo Scene Operaon Ctrl + Z
Undo Viewport Operaon Shi + Z
Update Background Image Alt + Shi + Ctrl + B
View Edged Faces Toggle F4
Viewport Background Alt + B
Virtual Viewport Pan Down Number pad 2
Virtual Viewport Pan Le Number pad 4
Virtual Viewport Pan Right Number pad 6
Virtual Viewport Pan Up Number pad 8
Virtual Viewport Toggle Number pad / (slash)
Virtual Viewport Zoom In Number pad + (plus)
Virtual Viewport Zoom Out Number pad - (hyphen)
Wireframe / Smooth + Highlights F3
Zoom Extents Alt + Ctrl + Z
Zoom Extents All Shi + Ctrl + Z
Zoom Extents All Selected Z
Zoom In 2X Alt + Shi + Ctrl + Z
Zoom Mode Alt + Z
Zoom Out 2X Alt + Shi + Z
Zoom Region Mode Ctrl + W
Zoom Viewport In [ (open bracket), Ctrl + = (equals)
Zoom Viewport Out ] (close bracket), Ctrl + - (hyphen)
Expand Object Toggle O
Expand Track Toggle Enter, T
Filters Q
Lock Selecon Space
Lock Tangents Toggle L
Make Controller Unique U
Move Highlight Down Down Arrow
Move Highlight Up Up Arrow
Move Keys M
Nudge Keys Le Le Arrow
Nudge Keys Right Right Arrow
Pan Ctrl + P
Paste Controller Ctrl + V
Scroll Down Ctrl + Down Arrow
Scroll Up Ctrl + Up Arrow
Snap Frames S
Zoom Alt + Z
Zoom Horizontal Extents Alt + Ctrl + Z
Zoom Horizontal Extents Keys Alt + X
Zoom Region Ctrl + W
Material Editor
Background B
Backlight L
Cycle 3X2, 5X3, 6X4 Sample Slots X
Get Material G
Go Backward to Sibling Le Arrow
Go Forward to Sibling Right Arrow
Go to Parent Up Arrow
Make Preview P
Opons O
page 2
Snaps Action Table
Snap To Edge/Segment Toggle Alt + F10
Snap To Endpoint Toggle Alt + F8
Snap To Face Toggle Alt + F11
Snap To Grid Points Toggle Alt + F5
Snap To Midpoint Toggle Alt + F9
Snap To Pivot Toggle Alt + F6
Snap To Vertex Toggle Alt + F7
Scene Explorer
Scene Explorer
Close Last Acvated Explorer Alt + Ctrl + P
Open Explorer: [Last Used] Alt + Ctrl + O
Main UI (continued)
Track View
Add Keys A
Apply Ease Curve Ctrl + E
Apply Mulplier Curve Ctrl + M
Assign Controller C
Copy Controller Ctrl + C
Edit Poly
Affect Backfacing Ctrl + F
Align To Grid G
Align To View V
Aach Shi + A
Aach List Shi + Ctrl + A
Auto Smooth A
Bevel Mode Shi + Ctrl + B
Bevel Sengs Ctrl + B
Border Level 3
Break Shi + B
Cap Alt + P
Chamfer Mode Shi + Ctrl + C
Chamfer Sengs Alt + Ctrl + C
Collapse Shi + L
Connect Shi + Ctrl + E
Connect Edge Sengs Ctrl + N
Constrain to Edges Shi + X
Constrain to Faces X
Create C
Create Shape From Edges Shi + M
Cut Alt + C
Detach Ctrl + D
Edge Level 2
Edit Triangulaon Mode Shi + T
Element Level 5
Extrude along Spline Mode Alt + E
Extrude Mode E
Extrude Sengs Ctrl + E
Flip Normals F
Grow Selecon Ctrl + Page Up
Hide H
Hide Unselected Alt + I
Hinge from Edge Mode L
Hinge from Edge Sengs Ctrl + L
Ignore Backfacing in Selecons Shi + Ctrl + I
Insert Vertex Mode Shi + I
Inset Mode I
Inset Sengs Ctrl + I
Make Planar P
MeshSmooth M
MeshSmooth Sengs Ctrl + M
Object Level 6
Outline Mode O
Outline Sengs Ctrl + O
Polygon Level 4
Quickslice Mode Shi + Ctrl + Q
Remove Shi + R
Remove Isolated Verces Shi + Ctrl + R
Remove Unused Map Verces Alt + Shi + Ctrl + R
Repeat Last Operaon ; (semicolon)
Reset Slice Plane Alt + S
Retriangulate Shi + Ctrl + T
Select By Vertex Alt + V
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shaded Face Toggle Alt + F
Shrink Selecon Ctrl + Page
Down
Slice Shi + S
Slice Plane Mode S
Split Edges Shi + P
Target Weld Mode Shi + Ctrl + W
Tessellate T
Tessellate Sengs Ctrl + T
Unhide All Alt + U
Use So Selecon Ctrl + S
Vertex Level 1
Weld Sengs Ctrl + W
Schematic View
Add Bookmark B
Display Floater D
Filters P
Free All Alt + F
Free Selected Alt + S
Invert Selected Nodes Ctrl + I
Move Children Alt + C
Next Bookmark Right Arrow
Previous Bookmark Le Arrow
Refresh View Ctrl + U
Rename Object R
Select All Nodes Ctrl + A
Select Children Ctrl + C
Select None Ctrl + D
Show Grid G
Toggle Shrink Ctrl + S
Use Connect Tool C
Use Pan Tool Ctrl + P
Use Select Tool S, Q
Use Zoom Region Tool Ctrl + W
Use Zoom Tool Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Selected Extents Z
Schematic View
ActiveShade
Close Q
Draw Region D
Render R
Select Object S
Toggle Toolbar (Docked) Space
page 3
Editable Poly
Bevel Mode Shi + Ctrl + B
Border Level 3
Chamfer Mode Shi + Ctrl + C
Connect Shi + Ctrl + E
Constrain to Edges Shi + X
Cut Alt + C
Edge Level 2
Element Level 5
Extrude Mode Shi + E
Face Level 4
Grow Selecon Ctrl + Page Up
Hide Alt + H
Hide Unselected Alt + I
Object Level 6
Quickslice Mode Shi + Ctrl + Q
Repeat Last Operaon ; (semicolon)
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shrink Selecon Ctrl + Page Down
Target Weld Mode Shi + Ctrl + W
Unhide All Alt + U
Vertex Level 1
Edit/Editable Mesh
Bevel Mode Ctrl + V, Ctrl + B
Chamfer Mode Ctrl + C
Cut Mode Alt + C
Detach Ctrl + D
Edge Invisible Ctrl + I
Edge Level 2
Edge Turn Ctrl + T
Element Level 5
Extrude Mode Ctrl + E
Face Level 3
Polygon Level 4
Vertex Level 1
Weld Selected Ctrl + W
Weld Target Mode Alt + W
Up
Hide (Poly) Alt + H
Hide Unselected (Poly) Alt + I
Isolate Selecon Alt + Q
Meshsmooth (Poly) Ctrl + M
Parameter Collector Alt + 2
Parameter Editor Alt + 1
Parameter Wiring Dialog... Alt + 5
Render Preset Slot A (Shi + click to save)
Render Preset Slot B (Shi + click to save)
Render Preset Slot C (Shi + click to save)
Render to Texture Dialog Toggle O
Repeat Last (Poly) ; (semicolon)
Slice (Poly) Shi + Ctrl + Q
Smart Scale R
Smart Select Q
Start Parameter Wiring... Ctrl + 5
Unhide All (Poly) Alt + U
WalkThrough View Mode Up Arrow
Weld (Poly) Shi + Ctrl + W
Physique
Copy Envelope Ctrl + C
Delete Ctrl + D
Next Page Down
Paste Envelope Ctrl + V
Previous Page Up
Reset Envelopes Ctrl + E
Mesh Select
Mesh Edit So Selecon 7
page 4
Macro Scripts
Add/Edit Parameters... (TV) Ctrl + 1
Asset Tracking... Shi + T
Bevel (Poly) Shi + Ctrl + B
Cap (Poly) Alt + P
Chamfer (Poly) Shi + Ctrl + C
Collapse (Poly) Alt + Ctrl + C
Collect Parameters SV Alt + 3
Collect Parameters TV Alt + 4
Connect (no dialog) (Poly) Shi + Ctrl + E
Create Camera From View Ctrl + C
Cut (Poly) Alt + C
Extrude along Spline (Poly) Alt + E
Geometry Selecon Visibility Toggle Alt + G
Grow Selecon (Poly) Ctrl + Page
Unwrap UVW
Break Selected Verces Ctrl + B
Detach Edge Verts D, Ctrl + D
Edit UVW's Ctrl + E
Filter Selected Faces Alt + F
Freeze Selected Ctrl + F
Get Face Selecon From Stack Alt + Shi + Ctrl + F
Get Selecon From Faces Alt + Shi + Ctrl + P
Hide Selected Ctrl + H
Load UVW Alt + Shi + Ctrl + L
Lock selected verces Space
Mirror Horizontal Alt + Shi + Ctrl + N
Mirror Vercal Alt + Shi + Ctrl + M
Move Horizontal Alt + Shi + Ctrl + J
Move Vercal Alt + Shi + Ctrl + K
Pan Ctrl + P
Planar map faces/patches Enter
Snap Ctrl + S
Texture Vertex Contract Selecon NumPad -, - (minus)
Texture Vertex Expand Selecon NumPad +, = (plus, equals)
Texture Vertex Move Mode W
Texture Vertex Rotate Mode E
Texture Vertex Scale Mode R
Texture Vertex Weld Selected Ctrl + W
Texture Vertex Target Weld Ctrl + T
Unwrap Opons Ctrl + O
Update Map Ctrl + U
Zoom Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Extents Selected Z
Zoom Region Ctrl + X
Zoom To Gizmo Shi + Space
Video Post
Add Image Filter Event Ctrl + F
Add Image Input Event Ctrl + I
Add Image Layer Event Ctrl + L
Add Image Output Event Ctrl + O
Add New Event Ctrl + A
Add Scene Event Ctrl + S
Edit Current Event Ctrl + E
Execute Sequence Ctrl + R
New Sequence Ctrl + N
FFD
Switch To Control Point Level Alt + Shi + C
Switch To Lace Level Alt + Shi + L
Switch To Set Volume Level Alt + Shi + S
Switch To Top Level Alt + Shi + T
Set Tessellaon Preset 1 Alt + 1
Set Tessellaon Preset 2 Alt + 2
Set Tessellaon Preset 3 Alt + 3
So Selecon Ctrl + S
Switch To Curve CV Level Alt + Shi + Z
Switch To Curve Level Alt + Shi + C
Switch To Imports Level Alt + Shi + I
Switch To Point Level Alt + Shi + P
Switch To Surface CV Level Alt + Shi + V
Switch To Surface Level Alt + Shi+ S
Switch To Top Level Alt + Shi + T
Transform Degrade Ctrl + X
WeightTable
Select All Ctrl + A
Select Invert Ctrl + I
Select None Ctrl + D
Particle Flow
Copy Selected In Parcle View Ctrl + C
Parcle Emission Toggle ; (semicolon)
Parcle View Toggle 6
Paste In Parcle View Ctrl + V
Select All In Parcle View Ctrl + A
Selected Parcle Emission Shi + ; (semicolon)
ActiveShade (Scanline)
Inialize P
Update U
page 5
NURBS
CV Constrained Normal Move Alt + N
CV Constrained U Move Alt + U
CV Constrained V Move Alt + V
Display Curves Shi + Ctrl + C
Display Dependents Ctrl + D
Display Laces Ctrl + L
Display Shaded Lace Alt + L
Display Surfaces Shi + Ctrl + S
Display Toolbox Ctrl + T
Display Trims Shi + Ctrl + T
Local Select Sub-Object By Name Ctrl + H
Select Next in U Ctrl + Right Arrow
Select Next in V Ctrl + Up Arrow
Select Previous in U Ctrl + Le Arrow
Select Previous in V Ctrl + Down Arrow
Select Sub-Object By Name H
Biped
Copy/Paste – Copy Alt + C
Copy/Paste - Paste Alt + V
Copy/Paste - Paste Opposite Alt + B
Fix Graphs Alt + Ctrl + F
Move All - Collapse Alt + M
Play Biped V
Reset All Limb Keys Alt + K
Scale In Transform Alt + Ctrl + E
Set Animaon Range Alt + R
Trackbar - Toggle Biped Keys Alt + T
TV Select end of footsteps Alt + D
TV Select enre footstep Alt + S
TV Select start of footsteps Alt + A
Reaction Manager
Set Max Influence Ctrl + I
Set Min Influence Alt + I
WalkThrough
Accelerate Toggle Q
Back S, Down Arrow
Decelerate Toggle Z
Down C, Shi + Down Arrow
Forward W, Up Arrow
Le A, Le Arrow
Level Shi + Space
Lock Vercal Rotaon Space
Reset Step Size Alt + [
Right D, Right Arrow
Up E, Shi + Up Arrow
Edit Normals
Break Normals B
Copy Normal Ctrl + C
Edge Level Ctrl + 3
Face Level Ctrl + 4
Make Explicit E
Normal Level Ctrl + 1
Object Level Ctrl + 0
Paste Normal Ctrl + V
Reset Normals R
Specify Normals S
Unify Normals U
Vertex Level Ctrl + 2
Brush Rotate Shi + Ctrl + 5
Brush Scale Shi + Ctrl + 6
Brush Stand Shi + Ctrl + 2
Brush Translate Shi + Ctrl + 1
Clump Ctrl + M
Cut Ctrl + C
Expand Selecon Shi + Ctrl + E
Guide Ctrl + 2
Hide Selected Shi + Ctrl + H
Ignore Back Shi + Ctrl + B
Invert Selecon Shi + Ctrl + N
Lock Shi + Ctrl + L
Merge Hairgroups Shi + Ctrl + = (equals)
Pop Selected Shi + Ctrl + P
Pop Zerosized Shi + Ctrl + Z
Puff Ctrl + P
Recomb Shi + Ctrl + M
Reset Rest Shi + Ctrl + T
Root Ctrl + 4
Rotate Ctrl + R
Rotate Selecon Shi + Ctrl + R
Scale Ctrl + E
Select Ctrl + S
Show Hidden Shi + Ctrl + W
So Falloff Shi + Ctrl + F
Split Hairgroups Shi + Ctrl + - (minus)
Stand Ctrl + N
Tip Ctrl + 1
Toggle Collisions Shi + Ctrl + C
Toggle Hairs Shi + Ctrl + I
Translate Ctrl + T
Undo Ctrl + Z
Unlock Shi + Ctrl + U
Verts Ctrl + 3
Crowd
Solve S
Quad Menu Sets
Animaon Alt + Right-click
Custom Shi + Ctrl + Alt + Right-click
Custom Shi + Ctrl + Right-click
Lighng | Render Ctrl + Alt + Right-click
Modeling Ctrl + Right-click
reactor Shi + Alt + Right-click
Snap Shi + Right-click
Viewports V
page 6
Hair Styling
Aenuate Shi + Ctrl + A
Brush Ctrl + B
Brush Clump Shi + Ctrl + 4
Brush Puff Shi + Ctrl + 3
Main UI
Adapve Degradaon Toggle O
Advanced LIghng Panel (Scanline) 9
Align Alt + A
Angle Snap Toggle A
Auto Key Mode Toggle N
Background Lock Toggle Alt + Ctrl + B
Backup Time One Unit , (comma)
Boom View B
Camera View C
Clone Ctrl + V
Close Last Acvated Explorer Alt + Ctrl + P
Cycle Acve Snap Type Alt + S
Cycle Selecon Method Ctrl + F
Cycle Snap Hit Alt + Shi + S
Default Lighng Toggle Ctrl + L
Disable Viewport D
Display as See-Through Toggle Alt + X
Environment Dialog Toggle 8
Expert Mode Toggle Ctrl + X
Fetch Alt + Ctrl + F
Forward Time One Unit . (period)
Front View F
Go to End Frame End
Go to Start Frame Home
Hide Cameras Toggle Shi + C
Hide Geometry Toggle Shi + G
Hide Grids Toggle G
Hide Helpers Toggle Shi + H
Hide Lights Toggle Shi + L
Hide Parcle Systems Toggle Shi + P
Hide Shapes Toggle Shi + S
Hide Space Warps Toggle Shi + W
Hold Ctrl + H
Le View L
Lock User Interface Toggle Alt + 0
Material Editor Toggle M
Maximize Viewport Toggle Alt + W
MAXScript Listener F11
New Scene Ctrl + N
Normal Align Alt + N
Open File Ctrl + O
Orbit View Mode Ctrl + R
Orthographic User View U
Pan View Ctrl + P
Pan Viewport I
Percent Snap Toggle Shi + Ctrl + P
Perspecve User View P
Play Animaon / (slash)
Quick Align Shi + A
Redo Scene Operaon Ctrl + Y
Redo Viewport Operaon Shi + Y
Redraw All Views ` (grave accent)
Render Shi + Q
Render Last F9
Render Setup F10
Restrict Plane Cycle F8
Restrict to X F5
Restrict to Y F6
Restrict to Z F7
Save File Ctrl + S
Scale Cycle Ctrl + E
Select All Ctrl + A
Select Ancestor Page Up
Select and Move W
Select and Rotate E
Select By Name H
Select Child Page Down
Select Children Ctrl + Page Down
Select Invert Ctrl + I
Select None Ctrl + D
Select Similar Ctrl + Q
Selecon Lock Toggle Space
Set Key Mode ' (apostrophe)
Set Keys K
Shade Selected Faces Toggle F2
Show Floang Dialogs Ctrl + ` (grave accent)
Show Main Toolbar Toggle Alt + 6
Show Safeframes Toggle Shi + F
Show Selecon Bracket Toggle J
Show Stascs Toggle 7
Snap To Frozen Objects Toggle Alt + F2
Snaps Toggle S
Snaps Use Axis Constraints Toggle Alt + D, Alt + F3
Sound Toggle \ (backslash)
Spacing Tool Shi + I
Spot/Direconal Light View Shi + 4
Sub-object Level 1 1
Sub-object Level 2 2
Sub-object Level 3 3
Sub-object Level 4 4
Sub-object Level 5 5
Sub-object Level Cycle Insert
Sub-object Selecon Toggle Ctrl + B
Top View T
Transform Gizmo Size Down - (minus)
Transform Gizmo Size Up = (equals)
Autodesk 3ds Max 2009 and Autodesk 3ds Max Design 2009 Shortcut Guide
Transform Gizmo Toggle X
Transform Type-In Dialog Toggle F12
Undo Scene Operaon Ctrl + Z
Undo Viewport Operaon Shi + Z
Update Background Image Alt + Shi + Ctrl + B
View Edged Faces Toggle F4
Viewport Background Alt + B
Virtual Viewport Pan Down Number pad 2
Virtual Viewport Pan Le Number pad 4
Virtual Viewport Pan Right Number pad 6
Virtual Viewport Pan Up Number pad 8
Virtual Viewport Toggle Number pad / (slash)
Virtual Viewport Zoom In Number pad + (plus)
Virtual Viewport Zoom Out Number pad - (hyphen)
Wireframe / Smooth + Highlights F3
Zoom Extents Alt + Ctrl + Z
Zoom Extents All Shi + Ctrl + Z
Zoom Extents All Selected Z
Zoom In 2X Alt + Shi + Ctrl + Z
Zoom Mode Alt + Z
Zoom Out 2X Alt + Shi + Z
Zoom Region Mode Ctrl + W
Zoom Viewport In [ (open bracket), Ctrl + = (equals)
Zoom Viewport Out ] (close bracket), Ctrl + - (hyphen)
Expand Object Toggle O
Expand Track Toggle Enter, T
Filters Q
Lock Selecon Space
Lock Tangents Toggle L
Make Controller Unique U
Move Highlight Down Down Arrow
Move Highlight Up Up Arrow
Move Keys M
Nudge Keys Le Le Arrow
Nudge Keys Right Right Arrow
Pan Ctrl + P
Paste Controller Ctrl + V
Scroll Down Ctrl + Down Arrow
Scroll Up Ctrl + Up Arrow
Snap Frames S
Zoom Alt + Z
Zoom Horizontal Extents Alt + Ctrl + Z
Zoom Horizontal Extents Keys Alt + X
Zoom Region Ctrl + W
Material Editor
Background B
Backlight L
Cycle 3X2, 5X3, 6X4 Sample Slots X
Get Material G
Go Backward to Sibling Le Arrow
Go Forward to Sibling Right Arrow
Go to Parent Up Arrow
Make Preview P
Opons O
page 2
Snaps Action Table
Snap To Edge/Segment Toggle Alt + F10
Snap To Endpoint Toggle Alt + F8
Snap To Face Toggle Alt + F11
Snap To Grid Points Toggle Alt + F5
Snap To Midpoint Toggle Alt + F9
Snap To Pivot Toggle Alt + F6
Snap To Vertex Toggle Alt + F7
Scene Explorer
Scene Explorer
Close Last Acvated Explorer Alt + Ctrl + P
Open Explorer: [Last Used] Alt + Ctrl + O
Main UI (continued)
Track View
Add Keys A
Apply Ease Curve Ctrl + E
Apply Mulplier Curve Ctrl + M
Assign Controller C
Copy Controller Ctrl + C
Edit Poly
Affect Backfacing Ctrl + F
Align To Grid G
Align To View V
Aach Shi + A
Aach List Shi + Ctrl + A
Auto Smooth A
Bevel Mode Shi + Ctrl + B
Bevel Sengs Ctrl + B
Border Level 3
Break Shi + B
Cap Alt + P
Chamfer Mode Shi + Ctrl + C
Chamfer Sengs Alt + Ctrl + C
Collapse Shi + L
Connect Shi + Ctrl + E
Connect Edge Sengs Ctrl + N
Constrain to Edges Shi + X
Constrain to Faces X
Create C
Create Shape From Edges Shi + M
Cut Alt + C
Detach Ctrl + D
Edge Level 2
Edit Triangulaon Mode Shi + T
Element Level 5
Extrude along Spline Mode Alt + E
Extrude Mode E
Extrude Sengs Ctrl + E
Flip Normals F
Grow Selecon Ctrl + Page Up
Hide H
Hide Unselected Alt + I
Hinge from Edge Mode L
Hinge from Edge Sengs Ctrl + L
Ignore Backfacing in Selecons Shi + Ctrl + I
Insert Vertex Mode Shi + I
Inset Mode I
Inset Sengs Ctrl + I
Make Planar P
MeshSmooth M
MeshSmooth Sengs Ctrl + M
Object Level 6
Outline Mode O
Outline Sengs Ctrl + O
Polygon Level 4
Quickslice Mode Shi + Ctrl + Q
Remove Shi + R
Remove Isolated Verces Shi + Ctrl + R
Remove Unused Map Verces Alt + Shi + Ctrl + R
Repeat Last Operaon ; (semicolon)
Reset Slice Plane Alt + S
Retriangulate Shi + Ctrl + T
Select By Vertex Alt + V
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shaded Face Toggle Alt + F
Shrink Selecon Ctrl + Page
Down
Slice Shi + S
Slice Plane Mode S
Split Edges Shi + P
Target Weld Mode Shi + Ctrl + W
Tessellate T
Tessellate Sengs Ctrl + T
Unhide All Alt + U
Use So Selecon Ctrl + S
Vertex Level 1
Weld Sengs Ctrl + W
Schematic View
Add Bookmark B
Display Floater D
Filters P
Free All Alt + F
Free Selected Alt + S
Invert Selected Nodes Ctrl + I
Move Children Alt + C
Next Bookmark Right Arrow
Previous Bookmark Le Arrow
Refresh View Ctrl + U
Rename Object R
Select All Nodes Ctrl + A
Select Children Ctrl + C
Select None Ctrl + D
Show Grid G
Toggle Shrink Ctrl + S
Use Connect Tool C
Use Pan Tool Ctrl + P
Use Select Tool S, Q
Use Zoom Region Tool Ctrl + W
Use Zoom Tool Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Selected Extents Z
Schematic View
ActiveShade
Close Q
Draw Region D
Render R
Select Object S
Toggle Toolbar (Docked) Space
page 3
Editable Poly
Bevel Mode Shi + Ctrl + B
Border Level 3
Chamfer Mode Shi + Ctrl + C
Connect Shi + Ctrl + E
Constrain to Edges Shi + X
Cut Alt + C
Edge Level 2
Element Level 5
Extrude Mode Shi + E
Face Level 4
Grow Selecon Ctrl + Page Up
Hide Alt + H
Hide Unselected Alt + I
Object Level 6
Quickslice Mode Shi + Ctrl + Q
Repeat Last Operaon ; (semicolon)
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shrink Selecon Ctrl + Page Down
Target Weld Mode Shi + Ctrl + W
Unhide All Alt + U
Vertex Level 1
Edit/Editable Mesh
Bevel Mode Ctrl + V, Ctrl + B
Chamfer Mode Ctrl + C
Cut Mode Alt + C
Detach Ctrl + D
Edge Invisible Ctrl + I
Edge Level 2
Edge Turn Ctrl + T
Element Level 5
Extrude Mode Ctrl + E
Face Level 3
Polygon Level 4
Vertex Level 1
Weld Selected Ctrl + W
Weld Target Mode Alt + W
Up
Hide (Poly) Alt + H
Hide Unselected (Poly) Alt + I
Isolate Selecon Alt + Q
Meshsmooth (Poly) Ctrl + M
Parameter Collector Alt + 2
Parameter Editor Alt + 1
Parameter Wiring Dialog... Alt + 5
Render Preset Slot A (Shi + click to save)
Render Preset Slot B (Shi + click to save)
Render Preset Slot C (Shi + click to save)
Render to Texture Dialog Toggle O
Repeat Last (Poly) ; (semicolon)
Slice (Poly) Shi + Ctrl + Q
Smart Scale R
Smart Select Q
Start Parameter Wiring... Ctrl + 5
Unhide All (Poly) Alt + U
WalkThrough View Mode Up Arrow
Weld (Poly) Shi + Ctrl + W
Physique
Copy Envelope Ctrl + C
Delete Ctrl + D
Next Page Down
Paste Envelope Ctrl + V
Previous Page Up
Reset Envelopes Ctrl + E
Mesh Select
Mesh Edit So Selecon 7
page 4
Macro Scripts
Add/Edit Parameters... (TV) Ctrl + 1
Asset Tracking... Shi + T
Bevel (Poly) Shi + Ctrl + B
Cap (Poly) Alt + P
Chamfer (Poly) Shi + Ctrl + C
Collapse (Poly) Alt + Ctrl + C
Collect Parameters SV Alt + 3
Collect Parameters TV Alt + 4
Connect (no dialog) (Poly) Shi + Ctrl + E
Create Camera From View Ctrl + C
Cut (Poly) Alt + C
Extrude along Spline (Poly) Alt + E
Geometry Selecon Visibility Toggle Alt + G
Grow Selecon (Poly) Ctrl + Page
Unwrap UVW
Break Selected Verces Ctrl + B
Detach Edge Verts D, Ctrl + D
Edit UVW's Ctrl + E
Filter Selected Faces Alt + F
Freeze Selected Ctrl + F
Get Face Selecon From Stack Alt + Shi + Ctrl + F
Get Selecon From Faces Alt + Shi + Ctrl + P
Hide Selected Ctrl + H
Load UVW Alt + Shi + Ctrl + L
Lock selected verces Space
Mirror Horizontal Alt + Shi + Ctrl + N
Mirror Vercal Alt + Shi + Ctrl + M
Move Horizontal Alt + Shi + Ctrl + J
Move Vercal Alt + Shi + Ctrl + K
Pan Ctrl + P
Planar map faces/patches Enter
Snap Ctrl + S
Texture Vertex Contract Selecon NumPad -, - (minus)
Texture Vertex Expand Selecon NumPad +, = (plus, equals)
Texture Vertex Move Mode W
Texture Vertex Rotate Mode E
Texture Vertex Scale Mode R
Texture Vertex Weld Selected Ctrl + W
Texture Vertex Target Weld Ctrl + T
Unwrap Opons Ctrl + O
Update Map Ctrl + U
Zoom Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Extents Selected Z
Zoom Region Ctrl + X
Zoom To Gizmo Shi + Space
Video Post
Add Image Filter Event Ctrl + F
Add Image Input Event Ctrl + I
Add Image Layer Event Ctrl + L
Add Image Output Event Ctrl + O
Add New Event Ctrl + A
Add Scene Event Ctrl + S
Edit Current Event Ctrl + E
Execute Sequence Ctrl + R
New Sequence Ctrl + N
FFD
Switch To Control Point Level Alt + Shi + C
Switch To Lace Level Alt + Shi + L
Switch To Set Volume Level Alt + Shi + S
Switch To Top Level Alt + Shi + T
Set Tessellaon Preset 1 Alt + 1
Set Tessellaon Preset 2 Alt + 2
Set Tessellaon Preset 3 Alt + 3
So Selecon Ctrl + S
Switch To Curve CV Level Alt + Shi + Z
Switch To Curve Level Alt + Shi + C
Switch To Imports Level Alt + Shi + I
Switch To Point Level Alt + Shi + P
Switch To Surface CV Level Alt + Shi + V
Switch To Surface Level Alt + Shi+ S
Switch To Top Level Alt + Shi + T
Transform Degrade Ctrl + X
WeightTable
Select All Ctrl + A
Select Invert Ctrl + I
Select None Ctrl + D
Particle Flow
Copy Selected In Parcle View Ctrl + C
Parcle Emission Toggle ; (semicolon)
Parcle View Toggle 6
Paste In Parcle View Ctrl + V
Select All In Parcle View Ctrl + A
Selected Parcle Emission Shi + ; (semicolon)
ActiveShade (Scanline)
Inialize P
Update U
page 5
NURBS
CV Constrained Normal Move Alt + N
CV Constrained U Move Alt + U
CV Constrained V Move Alt + V
Display Curves Shi + Ctrl + C
Display Dependents Ctrl + D
Display Laces Ctrl + L
Display Shaded Lace Alt + L
Display Surfaces Shi + Ctrl + S
Display Toolbox Ctrl + T
Display Trims Shi + Ctrl + T
Local Select Sub-Object By Name Ctrl + H
Select Next in U Ctrl + Right Arrow
Select Next in V Ctrl + Up Arrow
Select Previous in U Ctrl + Le Arrow
Select Previous in V Ctrl + Down Arrow
Select Sub-Object By Name H
Biped
Copy/Paste – Copy Alt + C
Copy/Paste - Paste Alt + V
Copy/Paste - Paste Opposite Alt + B
Fix Graphs Alt + Ctrl + F
Move All - Collapse Alt + M
Play Biped V
Reset All Limb Keys Alt + K
Scale In Transform Alt + Ctrl + E
Set Animaon Range Alt + R
Trackbar - Toggle Biped Keys Alt + T
TV Select end of footsteps Alt + D
TV Select enre footstep Alt + S
TV Select start of footsteps Alt + A
Reaction Manager
Set Max Influence Ctrl + I
Set Min Influence Alt + I
WalkThrough
Accelerate Toggle Q
Back S, Down Arrow
Decelerate Toggle Z
Down C, Shi + Down Arrow
Forward W, Up Arrow
Le A, Le Arrow
Level Shi + Space
Lock Vercal Rotaon Space
Reset Step Size Alt + [
Right D, Right Arrow
Up E, Shi + Up Arrow
Edit Normals
Break Normals B
Copy Normal Ctrl + C
Edge Level Ctrl + 3
Face Level Ctrl + 4
Make Explicit E
Normal Level Ctrl + 1
Object Level Ctrl + 0
Paste Normal Ctrl + V
Reset Normals R
Specify Normals S
Unify Normals U
Vertex Level Ctrl + 2
Brush Rotate Shi + Ctrl + 5
Brush Scale Shi + Ctrl + 6
Brush Stand Shi + Ctrl + 2
Brush Translate Shi + Ctrl + 1
Clump Ctrl + M
Cut Ctrl + C
Expand Selecon Shi + Ctrl + E
Guide Ctrl + 2
Hide Selected Shi + Ctrl + H
Ignore Back Shi + Ctrl + B
Invert Selecon Shi + Ctrl + N
Lock Shi + Ctrl + L
Merge Hairgroups Shi + Ctrl + = (equals)
Pop Selected Shi + Ctrl + P
Pop Zerosized Shi + Ctrl + Z
Puff Ctrl + P
Recomb Shi + Ctrl + M
Reset Rest Shi + Ctrl + T
Root Ctrl + 4
Rotate Ctrl + R
Rotate Selecon Shi + Ctrl + R
Scale Ctrl + E
Select Ctrl + S
Show Hidden Shi + Ctrl + W
So Falloff Shi + Ctrl + F
Split Hairgroups Shi + Ctrl + - (minus)
Stand Ctrl + N
Tip Ctrl + 1
Toggle Collisions Shi + Ctrl + C
Toggle Hairs Shi + Ctrl + I
Translate Ctrl + T
Undo Ctrl + Z
Unlock Shi + Ctrl + U
Verts Ctrl + 3
Crowd
Solve S
Quad Menu Sets
Animaon Alt + Right-click
Custom Shi + Ctrl + Alt + Right-click
Custom Shi + Ctrl + Right-click
Lighng | Render Ctrl + Alt + Right-click
Modeling Ctrl + Right-click
reactor Shi + Alt + Right-click
Snap Shi + Right-click
Viewports V
page 6
Hair Styling
Aenuate Shi + Ctrl + A
Brush Ctrl + B
Brush Clump Shi + Ctrl + 4
Brush Puff Shi + Ctrl + 3
Main UI
Adapve Degradaon Toggle O
Advanced LIghng Panel (Scanline) 9
Align Alt + A
Angle Snap Toggle A
Auto Key Mode Toggle N
Background Lock Toggle Alt + Ctrl + B
Backup Time One Unit , (comma)
Boom View B
Camera View C
Clone Ctrl + V
Close Last Acvated Explorer Alt + Ctrl + P
Cycle Acve Snap Type Alt + S
Cycle Selecon Method Ctrl + F
Cycle Snap Hit Alt + Shi + S
Default Lighng Toggle Ctrl + L
Disable Viewport D
Display as See-Through Toggle Alt + X
Environment Dialog Toggle 8
Expert Mode Toggle Ctrl + X
Fetch Alt + Ctrl + F
Forward Time One Unit . (period)
Front View F
Go to End Frame End
Go to Start Frame Home
Hide Cameras Toggle Shi + C
Hide Geometry Toggle Shi + G
Hide Grids Toggle G
Hide Helpers Toggle Shi + H
Hide Lights Toggle Shi + L
Hide Parcle Systems Toggle Shi + P
Hide Shapes Toggle Shi + S
Hide Space Warps Toggle Shi + W
Hold Ctrl + H
Le View L
Lock User Interface Toggle Alt + 0
Material Editor Toggle M
Maximize Viewport Toggle Alt + W
MAXScript Listener F11
New Scene Ctrl + N
Normal Align Alt + N
Open File Ctrl + O
Orbit View Mode Ctrl + R
Orthographic User View U
Pan View Ctrl + P
Pan Viewport I
Percent Snap Toggle Shi + Ctrl + P
Perspecve User View P
Play Animaon / (slash)
Quick Align Shi + A
Redo Scene Operaon Ctrl + Y
Redo Viewport Operaon Shi + Y
Redraw All Views ` (grave accent)
Render Shi + Q
Render Last F9
Render Setup F10
Restrict Plane Cycle F8
Restrict to X F5
Restrict to Y F6
Restrict to Z F7
Save File Ctrl + S
Scale Cycle Ctrl + E
Select All Ctrl + A
Select Ancestor Page Up
Select and Move W
Select and Rotate E
Select By Name H
Select Child Page Down
Select Children Ctrl + Page Down
Select Invert Ctrl + I
Select None Ctrl + D
Select Similar Ctrl + Q
Selecon Lock Toggle Space
Set Key Mode ' (apostrophe)
Set Keys K
Shade Selected Faces Toggle F2
Show Floang Dialogs Ctrl + ` (grave accent)
Show Main Toolbar Toggle Alt + 6
Show Safeframes Toggle Shi + F
Show Selecon Bracket Toggle J
Show Stascs Toggle 7
Snap To Frozen Objects Toggle Alt + F2
Snaps Toggle S
Snaps Use Axis Constraints Toggle Alt + D, Alt + F3
Sound Toggle \ (backslash)
Spacing Tool Shi + I
Spot/Direconal Light View Shi + 4
Sub-object Level 1 1
Sub-object Level 2 2
Sub-object Level 3 3
Sub-object Level 4 4
Sub-object Level 5 5
Sub-object Level Cycle Insert
Sub-object Selecon Toggle Ctrl + B
Top View T
Transform Gizmo Size Down - (minus)
Transform Gizmo Size Up = (equals)
Autodesk 3ds Max 2009 and Autodesk 3ds Max Design 2009 Shortcut Guide
Transform Gizmo Toggle X
Transform Type-In Dialog Toggle F12
Undo Scene Operaon Ctrl + Z
Undo Viewport Operaon Shi + Z
Update Background Image Alt + Shi + Ctrl + B
View Edged Faces Toggle F4
Viewport Background Alt + B
Virtual Viewport Pan Down Number pad 2
Virtual Viewport Pan Le Number pad 4
Virtual Viewport Pan Right Number pad 6
Virtual Viewport Pan Up Number pad 8
Virtual Viewport Toggle Number pad / (slash)
Virtual Viewport Zoom In Number pad + (plus)
Virtual Viewport Zoom Out Number pad - (hyphen)
Wireframe / Smooth + Highlights F3
Zoom Extents Alt + Ctrl + Z
Zoom Extents All Shi + Ctrl + Z
Zoom Extents All Selected Z
Zoom In 2X Alt + Shi + Ctrl + Z
Zoom Mode Alt + Z
Zoom Out 2X Alt + Shi + Z
Zoom Region Mode Ctrl + W
Zoom Viewport In [ (open bracket), Ctrl + = (equals)
Zoom Viewport Out ] (close bracket), Ctrl + - (hyphen)
Expand Object Toggle O
Expand Track Toggle Enter, T
Filters Q
Lock Selecon Space
Lock Tangents Toggle L
Make Controller Unique U
Move Highlight Down Down Arrow
Move Highlight Up Up Arrow
Move Keys M
Nudge Keys Le Le Arrow
Nudge Keys Right Right Arrow
Pan Ctrl + P
Paste Controller Ctrl + V
Scroll Down Ctrl + Down Arrow
Scroll Up Ctrl + Up Arrow
Snap Frames S
Zoom Alt + Z
Zoom Horizontal Extents Alt + Ctrl + Z
Zoom Horizontal Extents Keys Alt + X
Zoom Region Ctrl + W
Material Editor
Background B
Backlight L
Cycle 3X2, 5X3, 6X4 Sample Slots X
Get Material G
Go Backward to Sibling Le Arrow
Go Forward to Sibling Right Arrow
Go to Parent Up Arrow
Make Preview P
Opons O
page 2
Snaps Action Table
Snap To Edge/Segment Toggle Alt + F10
Snap To Endpoint Toggle Alt + F8
Snap To Face Toggle Alt + F11
Snap To Grid Points Toggle Alt + F5
Snap To Midpoint Toggle Alt + F9
Snap To Pivot Toggle Alt + F6
Snap To Vertex Toggle Alt + F7
Scene Explorer
Scene Explorer
Close Last Acvated Explorer Alt + Ctrl + P
Open Explorer: [Last Used] Alt + Ctrl + O
Main UI (continued)
Track View
Add Keys A
Apply Ease Curve Ctrl + E
Apply Mulplier Curve Ctrl + M
Assign Controller C
Copy Controller Ctrl + C
Edit Poly
Affect Backfacing Ctrl + F
Align To Grid G
Align To View V
Aach Shi + A
Aach List Shi + Ctrl + A
Auto Smooth A
Bevel Mode Shi + Ctrl + B
Bevel Sengs Ctrl + B
Border Level 3
Break Shi + B
Cap Alt + P
Chamfer Mode Shi + Ctrl + C
Chamfer Sengs Alt + Ctrl + C
Collapse Shi + L
Connect Shi + Ctrl + E
Connect Edge Sengs Ctrl + N
Constrain to Edges Shi + X
Constrain to Faces X
Create C
Create Shape From Edges Shi + M
Cut Alt + C
Detach Ctrl + D
Edge Level 2
Edit Triangulaon Mode Shi + T
Element Level 5
Extrude along Spline Mode Alt + E
Extrude Mode E
Extrude Sengs Ctrl + E
Flip Normals F
Grow Selecon Ctrl + Page Up
Hide H
Hide Unselected Alt + I
Hinge from Edge Mode L
Hinge from Edge Sengs Ctrl + L
Ignore Backfacing in Selecons Shi + Ctrl + I
Insert Vertex Mode Shi + I
Inset Mode I
Inset Sengs Ctrl + I
Make Planar P
MeshSmooth M
MeshSmooth Sengs Ctrl + M
Object Level 6
Outline Mode O
Outline Sengs Ctrl + O
Polygon Level 4
Quickslice Mode Shi + Ctrl + Q
Remove Shi + R
Remove Isolated Verces Shi + Ctrl + R
Remove Unused Map Verces Alt + Shi + Ctrl + R
Repeat Last Operaon ; (semicolon)
Reset Slice Plane Alt + S
Retriangulate Shi + Ctrl + T
Select By Vertex Alt + V
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shaded Face Toggle Alt + F
Shrink Selecon Ctrl + Page
Down
Slice Shi + S
Slice Plane Mode S
Split Edges Shi + P
Target Weld Mode Shi + Ctrl + W
Tessellate T
Tessellate Sengs Ctrl + T
Unhide All Alt + U
Use So Selecon Ctrl + S
Vertex Level 1
Weld Sengs Ctrl + W
Schematic View
Add Bookmark B
Display Floater D
Filters P
Free All Alt + F
Free Selected Alt + S
Invert Selected Nodes Ctrl + I
Move Children Alt + C
Next Bookmark Right Arrow
Previous Bookmark Le Arrow
Refresh View Ctrl + U
Rename Object R
Select All Nodes Ctrl + A
Select Children Ctrl + C
Select None Ctrl + D
Show Grid G
Toggle Shrink Ctrl + S
Use Connect Tool C
Use Pan Tool Ctrl + P
Use Select Tool S, Q
Use Zoom Region Tool Ctrl + W
Use Zoom Tool Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Selected Extents Z
Schematic View
ActiveShade
Close Q
Draw Region D
Render R
Select Object S
Toggle Toolbar (Docked) Space
page 3
Editable Poly
Bevel Mode Shi + Ctrl + B
Border Level 3
Chamfer Mode Shi + Ctrl + C
Connect Shi + Ctrl + E
Constrain to Edges Shi + X
Cut Alt + C
Edge Level 2
Element Level 5
Extrude Mode Shi + E
Face Level 4
Grow Selecon Ctrl + Page Up
Hide Alt + H
Hide Unselected Alt + I
Object Level 6
Quickslice Mode Shi + Ctrl + Q
Repeat Last Operaon ; (semicolon)
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shrink Selecon Ctrl + Page Down
Target Weld Mode Shi + Ctrl + W
Unhide All Alt + U
Vertex Level 1
Edit/Editable Mesh
Bevel Mode Ctrl + V, Ctrl + B
Chamfer Mode Ctrl + C
Cut Mode Alt + C
Detach Ctrl + D
Edge Invisible Ctrl + I
Edge Level 2
Edge Turn Ctrl + T
Element Level 5
Extrude Mode Ctrl + E
Face Level 3
Polygon Level 4
Vertex Level 1
Weld Selected Ctrl + W
Weld Target Mode Alt + W
Up
Hide (Poly) Alt + H
Hide Unselected (Poly) Alt + I
Isolate Selecon Alt + Q
Meshsmooth (Poly) Ctrl + M
Parameter Collector Alt + 2
Parameter Editor Alt + 1
Parameter Wiring Dialog... Alt + 5
Render Preset Slot A (Shi + click to save)
Render Preset Slot B (Shi + click to save)
Render Preset Slot C (Shi + click to save)
Render to Texture Dialog Toggle O
Repeat Last (Poly) ; (semicolon)
Slice (Poly) Shi + Ctrl + Q
Smart Scale R
Smart Select Q
Start Parameter Wiring... Ctrl + 5
Unhide All (Poly) Alt + U
WalkThrough View Mode Up Arrow
Weld (Poly) Shi + Ctrl + W
Physique
Copy Envelope Ctrl + C
Delete Ctrl + D
Next Page Down
Paste Envelope Ctrl + V
Previous Page Up
Reset Envelopes Ctrl + E
Mesh Select
Mesh Edit So Selecon 7
page 4
Macro Scripts
Add/Edit Parameters... (TV) Ctrl + 1
Asset Tracking... Shi + T
Bevel (Poly) Shi + Ctrl + B
Cap (Poly) Alt + P
Chamfer (Poly) Shi + Ctrl + C
Collapse (Poly) Alt + Ctrl + C
Collect Parameters SV Alt + 3
Collect Parameters TV Alt + 4
Connect (no dialog) (Poly) Shi + Ctrl + E
Create Camera From View Ctrl + C
Cut (Poly) Alt + C
Extrude along Spline (Poly) Alt + E
Geometry Selecon Visibility Toggle Alt + G
Grow Selecon (Poly) Ctrl + Page
Unwrap UVW
Break Selected Verces Ctrl + B
Detach Edge Verts D, Ctrl + D
Edit UVW's Ctrl + E
Filter Selected Faces Alt + F
Freeze Selected Ctrl + F
Get Face Selecon From Stack Alt + Shi + Ctrl + F
Get Selecon From Faces Alt + Shi + Ctrl + P
Hide Selected Ctrl + H
Load UVW Alt + Shi + Ctrl + L
Lock selected verces Space
Mirror Horizontal Alt + Shi + Ctrl + N
Mirror Vercal Alt + Shi + Ctrl + M
Move Horizontal Alt + Shi + Ctrl + J
Move Vercal Alt + Shi + Ctrl + K
Pan Ctrl + P
Planar map faces/patches Enter
Snap Ctrl + S
Texture Vertex Contract Selecon NumPad -, - (minus)
Texture Vertex Expand Selecon NumPad +, = (plus, equals)
Texture Vertex Move Mode W
Texture Vertex Rotate Mode E
Texture Vertex Scale Mode R
Texture Vertex Weld Selected Ctrl + W
Texture Vertex Target Weld Ctrl + T
Unwrap Opons Ctrl + O
Update Map Ctrl + U
Zoom Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Extents Selected Z
Zoom Region Ctrl + X
Zoom To Gizmo Shi + Space
Video Post
Add Image Filter Event Ctrl + F
Add Image Input Event Ctrl + I
Add Image Layer Event Ctrl + L
Add Image Output Event Ctrl + O
Add New Event Ctrl + A
Add Scene Event Ctrl + S
Edit Current Event Ctrl + E
Execute Sequence Ctrl + R
New Sequence Ctrl + N
FFD
Switch To Control Point Level Alt + Shi + C
Switch To Lace Level Alt + Shi + L
Switch To Set Volume Level Alt + Shi + S
Switch To Top Level Alt + Shi + T
Set Tessellaon Preset 1 Alt + 1
Set Tessellaon Preset 2 Alt + 2
Set Tessellaon Preset 3 Alt + 3
So Selecon Ctrl + S
Switch To Curve CV Level Alt + Shi + Z
Switch To Curve Level Alt + Shi + C
Switch To Imports Level Alt + Shi + I
Switch To Point Level Alt + Shi + P
Switch To Surface CV Level Alt + Shi + V
Switch To Surface Level Alt + Shi+ S
Switch To Top Level Alt + Shi + T
Transform Degrade Ctrl + X
WeightTable
Select All Ctrl + A
Select Invert Ctrl + I
Select None Ctrl + D
Particle Flow
Copy Selected In Parcle View Ctrl + C
Parcle Emission Toggle ; (semicolon)
Parcle View Toggle 6
Paste In Parcle View Ctrl + V
Select All In Parcle View Ctrl + A
Selected Parcle Emission Shi + ; (semicolon)
ActiveShade (Scanline)
Inialize P
Update U
page 5
NURBS
CV Constrained Normal Move Alt + N
CV Constrained U Move Alt + U
CV Constrained V Move Alt + V
Display Curves Shi + Ctrl + C
Display Dependents Ctrl + D
Display Laces Ctrl + L
Display Shaded Lace Alt + L
Display Surfaces Shi + Ctrl + S
Display Toolbox Ctrl + T
Display Trims Shi + Ctrl + T
Local Select Sub-Object By Name Ctrl + H
Select Next in U Ctrl + Right Arrow
Select Next in V Ctrl + Up Arrow
Select Previous in U Ctrl + Le Arrow
Select Previous in V Ctrl + Down Arrow
Select Sub-Object By Name H
Biped
Copy/Paste – Copy Alt + C
Copy/Paste - Paste Alt + V
Copy/Paste - Paste Opposite Alt + B
Fix Graphs Alt + Ctrl + F
Move All - Collapse Alt + M
Play Biped V
Reset All Limb Keys Alt + K
Scale In Transform Alt + Ctrl + E
Set Animaon Range Alt + R
Trackbar - Toggle Biped Keys Alt + T
TV Select end of footsteps Alt + D
TV Select enre footstep Alt + S
TV Select start of footsteps Alt + A
Reaction Manager
Set Max Influence Ctrl + I
Set Min Influence Alt + I
WalkThrough
Accelerate Toggle Q
Back S, Down Arrow
Decelerate Toggle Z
Down C, Shi + Down Arrow
Forward W, Up Arrow
Le A, Le Arrow
Level Shi + Space
Lock Vercal Rotaon Space
Reset Step Size Alt + [
Right D, Right Arrow
Up E, Shi + Up Arrow
Edit Normals
Break Normals B
Copy Normal Ctrl + C
Edge Level Ctrl + 3
Face Level Ctrl + 4
Make Explicit E
Normal Level Ctrl + 1
Object Level Ctrl + 0
Paste Normal Ctrl + V
Reset Normals R
Specify Normals S
Unify Normals U
Vertex Level Ctrl + 2
Brush Rotate Shi + Ctrl + 5
Brush Scale Shi + Ctrl + 6
Brush Stand Shi + Ctrl + 2
Brush Translate Shi + Ctrl + 1
Clump Ctrl + M
Cut Ctrl + C
Expand Selecon Shi + Ctrl + E
Guide Ctrl + 2
Hide Selected Shi + Ctrl + H
Ignore Back Shi + Ctrl + B
Invert Selecon Shi + Ctrl + N
Lock Shi + Ctrl + L
Merge Hairgroups Shi + Ctrl + = (equals)
Pop Selected Shi + Ctrl + P
Pop Zerosized Shi + Ctrl + Z
Puff Ctrl + P
Recomb Shi + Ctrl + M
Reset Rest Shi + Ctrl + T
Root Ctrl + 4
Rotate Ctrl + R
Rotate Selecon Shi + Ctrl + R
Scale Ctrl + E
Select Ctrl + S
Show Hidden Shi + Ctrl + W
So Falloff Shi + Ctrl + F
Split Hairgroups Shi + Ctrl + - (minus)
Stand Ctrl + N
Tip Ctrl + 1
Toggle Collisions Shi + Ctrl + C
Toggle Hairs Shi + Ctrl + I
Translate Ctrl + T
Undo Ctrl + Z
Unlock Shi + Ctrl + U
Verts Ctrl + 3
Crowd
Solve S
Quad Menu Sets
Animaon Alt + Right-click
Custom Shi + Ctrl + Alt + Right-click
Custom Shi + Ctrl + Right-click
Lighng | Render Ctrl + Alt + Right-click
Modeling Ctrl + Right-click
reactor Shi + Alt + Right-click
Snap Shi + Right-click
Viewports V
page 6
Hair Styling
Aenuate Shi + Ctrl + A
Brush Ctrl + B
Brush Clump Shi + Ctrl + 4
Brush Puff Shi + Ctrl + 3
Main UI
Adapve Degradaon Toggle O
Advanced LIghng Panel (Scanline) 9
Align Alt + A
Angle Snap Toggle A
Auto Key Mode Toggle N
Background Lock Toggle Alt + Ctrl + B
Backup Time One Unit , (comma)
Boom View B
Camera View C
Clone Ctrl + V
Close Last Acvated Explorer Alt + Ctrl + P
Cycle Acve Snap Type Alt + S
Cycle Selecon Method Ctrl + F
Cycle Snap Hit Alt + Shi + S
Default Lighng Toggle Ctrl + L
Disable Viewport D
Display as See-Through Toggle Alt + X
Environment Dialog Toggle 8
Expert Mode Toggle Ctrl + X
Fetch Alt + Ctrl + F
Forward Time One Unit . (period)
Front View F
Go to End Frame End
Go to Start Frame Home
Hide Cameras Toggle Shi + C
Hide Geometry Toggle Shi + G
Hide Grids Toggle G
Hide Helpers Toggle Shi + H
Hide Lights Toggle Shi + L
Hide Parcle Systems Toggle Shi + P
Hide Shapes Toggle Shi + S
Hide Space Warps Toggle Shi + W
Hold Ctrl + H
Le View L
Lock User Interface Toggle Alt + 0
Material Editor Toggle M
Maximize Viewport Toggle Alt + W
MAXScript Listener F11
New Scene Ctrl + N
Normal Align Alt + N
Open File Ctrl + O
Orbit View Mode Ctrl + R
Orthographic User View U
Pan View Ctrl + P
Pan Viewport I
Percent Snap Toggle Shi + Ctrl + P
Perspecve User View P
Play Animaon / (slash)
Quick Align Shi + A
Redo Scene Operaon Ctrl + Y
Redo Viewport Operaon Shi + Y
Redraw All Views ` (grave accent)
Render Shi + Q
Render Last F9
Render Setup F10
Restrict Plane Cycle F8
Restrict to X F5
Restrict to Y F6
Restrict to Z F7
Save File Ctrl + S
Scale Cycle Ctrl + E
Select All Ctrl + A
Select Ancestor Page Up
Select and Move W
Select and Rotate E
Select By Name H
Select Child Page Down
Select Children Ctrl + Page Down
Select Invert Ctrl + I
Select None Ctrl + D
Select Similar Ctrl + Q
Selecon Lock Toggle Space
Set Key Mode ' (apostrophe)
Set Keys K
Shade Selected Faces Toggle F2
Show Floang Dialogs Ctrl + ` (grave accent)
Show Main Toolbar Toggle Alt + 6
Show Safeframes Toggle Shi + F
Show Selecon Bracket Toggle J
Show Stascs Toggle 7
Snap To Frozen Objects Toggle Alt + F2
Snaps Toggle S
Snaps Use Axis Constraints Toggle Alt + D, Alt + F3
Sound Toggle \ (backslash)
Spacing Tool Shi + I
Spot/Direconal Light View Shi + 4
Sub-object Level 1 1
Sub-object Level 2 2
Sub-object Level 3 3
Sub-object Level 4 4
Sub-object Level 5 5
Sub-object Level Cycle Insert
Sub-object Selecon Toggle Ctrl + B
Top View T
Transform Gizmo Size Down - (minus)
Transform Gizmo Size Up = (equals)
Autodesk 3ds Max 2009 and Autodesk 3ds Max Design 2009 Shortcut Guide
Transform Gizmo Toggle X
Transform Type-In Dialog Toggle F12
Undo Scene Operaon Ctrl + Z
Undo Viewport Operaon Shi + Z
Update Background Image Alt + Shi + Ctrl + B
View Edged Faces Toggle F4
Viewport Background Alt + B
Virtual Viewport Pan Down Number pad 2
Virtual Viewport Pan Le Number pad 4
Virtual Viewport Pan Right Number pad 6
Virtual Viewport Pan Up Number pad 8
Virtual Viewport Toggle Number pad / (slash)
Virtual Viewport Zoom In Number pad + (plus)
Virtual Viewport Zoom Out Number pad - (hyphen)
Wireframe / Smooth + Highlights F3
Zoom Extents Alt + Ctrl + Z
Zoom Extents All Shi + Ctrl + Z
Zoom Extents All Selected Z
Zoom In 2X Alt + Shi + Ctrl + Z
Zoom Mode Alt + Z
Zoom Out 2X Alt + Shi + Z
Zoom Region Mode Ctrl + W
Zoom Viewport In [ (open bracket), Ctrl + = (equals)
Zoom Viewport Out ] (close bracket), Ctrl + - (hyphen)
Expand Object Toggle O
Expand Track Toggle Enter, T
Filters Q
Lock Selecon Space
Lock Tangents Toggle L
Make Controller Unique U
Move Highlight Down Down Arrow
Move Highlight Up Up Arrow
Move Keys M
Nudge Keys Le Le Arrow
Nudge Keys Right Right Arrow
Pan Ctrl + P
Paste Controller Ctrl + V
Scroll Down Ctrl + Down Arrow
Scroll Up Ctrl + Up Arrow
Snap Frames S
Zoom Alt + Z
Zoom Horizontal Extents Alt + Ctrl + Z
Zoom Horizontal Extents Keys Alt + X
Zoom Region Ctrl + W
Material Editor
Background B
Backlight L
Cycle 3X2, 5X3, 6X4 Sample Slots X
Get Material G
Go Backward to Sibling Le Arrow
Go Forward to Sibling Right Arrow
Go to Parent Up Arrow
Make Preview P
Opons O
page 2
Snaps Action Table
Snap To Edge/Segment Toggle Alt + F10
Snap To Endpoint Toggle Alt + F8
Snap To Face Toggle Alt + F11
Snap To Grid Points Toggle Alt + F5
Snap To Midpoint Toggle Alt + F9
Snap To Pivot Toggle Alt + F6
Snap To Vertex Toggle Alt + F7
Scene Explorer
Scene Explorer
Close Last Acvated Explorer Alt + Ctrl + P
Open Explorer: [Last Used] Alt + Ctrl + O
Main UI (continued)
Track View
Add Keys A
Apply Ease Curve Ctrl + E
Apply Mulplier Curve Ctrl + M
Assign Controller C
Copy Controller Ctrl + C
Edit Poly
Affect Backfacing Ctrl + F
Align To Grid G
Align To View V
Aach Shi + A
Aach List Shi + Ctrl + A
Auto Smooth A
Bevel Mode Shi + Ctrl + B
Bevel Sengs Ctrl + B
Border Level 3
Break Shi + B
Cap Alt + P
Chamfer Mode Shi + Ctrl + C
Chamfer Sengs Alt + Ctrl + C
Collapse Shi + L
Connect Shi + Ctrl + E
Connect Edge Sengs Ctrl + N
Constrain to Edges Shi + X
Constrain to Faces X
Create C
Create Shape From Edges Shi + M
Cut Alt + C
Detach Ctrl + D
Edge Level 2
Edit Triangulaon Mode Shi + T
Element Level 5
Extrude along Spline Mode Alt + E
Extrude Mode E
Extrude Sengs Ctrl + E
Flip Normals F
Grow Selecon Ctrl + Page Up
Hide H
Hide Unselected Alt + I
Hinge from Edge Mode L
Hinge from Edge Sengs Ctrl + L
Ignore Backfacing in Selecons Shi + Ctrl + I
Insert Vertex Mode Shi + I
Inset Mode I
Inset Sengs Ctrl + I
Make Planar P
MeshSmooth M
MeshSmooth Sengs Ctrl + M
Object Level 6
Outline Mode O
Outline Sengs Ctrl + O
Polygon Level 4
Quickslice Mode Shi + Ctrl + Q
Remove Shi + R
Remove Isolated Verces Shi + Ctrl + R
Remove Unused Map Verces Alt + Shi + Ctrl + R
Repeat Last Operaon ; (semicolon)
Reset Slice Plane Alt + S
Retriangulate Shi + Ctrl + T
Select By Vertex Alt + V
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shaded Face Toggle Alt + F
Shrink Selecon Ctrl + Page
Down
Slice Shi + S
Slice Plane Mode S
Split Edges Shi + P
Target Weld Mode Shi + Ctrl + W
Tessellate T
Tessellate Sengs Ctrl + T
Unhide All Alt + U
Use So Selecon Ctrl + S
Vertex Level 1
Weld Sengs Ctrl + W
Schematic View
Add Bookmark B
Display Floater D
Filters P
Free All Alt + F
Free Selected Alt + S
Invert Selected Nodes Ctrl + I
Move Children Alt + C
Next Bookmark Right Arrow
Previous Bookmark Le Arrow
Refresh View Ctrl + U
Rename Object R
Select All Nodes Ctrl + A
Select Children Ctrl + C
Select None Ctrl + D
Show Grid G
Toggle Shrink Ctrl + S
Use Connect Tool C
Use Pan Tool Ctrl + P
Use Select Tool S, Q
Use Zoom Region Tool Ctrl + W
Use Zoom Tool Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Selected Extents Z
Schematic View
ActiveShade
Close Q
Draw Region D
Render R
Select Object S
Toggle Toolbar (Docked) Space
page 3
Editable Poly
Bevel Mode Shi + Ctrl + B
Border Level 3
Chamfer Mode Shi + Ctrl + C
Connect Shi + Ctrl + E
Constrain to Edges Shi + X
Cut Alt + C
Edge Level 2
Element Level 5
Extrude Mode Shi + E
Face Level 4
Grow Selecon Ctrl + Page Up
Hide Alt + H
Hide Unselected Alt + I
Object Level 6
Quickslice Mode Shi + Ctrl + Q
Repeat Last Operaon ; (semicolon)
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shrink Selecon Ctrl + Page Down
Target Weld Mode Shi + Ctrl + W
Unhide All Alt + U
Vertex Level 1
Edit/Editable Mesh
Bevel Mode Ctrl + V, Ctrl + B
Chamfer Mode Ctrl + C
Cut Mode Alt + C
Detach Ctrl + D
Edge Invisible Ctrl + I
Edge Level 2
Edge Turn Ctrl + T
Element Level 5
Extrude Mode Ctrl + E
Face Level 3
Polygon Level 4
Vertex Level 1
Weld Selected Ctrl + W
Weld Target Mode Alt + W
Up
Hide (Poly) Alt + H
Hide Unselected (Poly) Alt + I
Isolate Selecon Alt + Q
Meshsmooth (Poly) Ctrl + M
Parameter Collector Alt + 2
Parameter Editor Alt + 1
Parameter Wiring Dialog... Alt + 5
Render Preset Slot A (Shi + click to save)
Render Preset Slot B (Shi + click to save)
Render Preset Slot C (Shi + click to save)
Render to Texture Dialog Toggle O
Repeat Last (Poly) ; (semicolon)
Slice (Poly) Shi + Ctrl + Q
Smart Scale R
Smart Select Q
Start Parameter Wiring... Ctrl + 5
Unhide All (Poly) Alt + U
WalkThrough View Mode Up Arrow
Weld (Poly) Shi + Ctrl + W
Physique
Copy Envelope Ctrl + C
Delete Ctrl + D
Next Page Down
Paste Envelope Ctrl + V
Previous Page Up
Reset Envelopes Ctrl + E
Mesh Select
Mesh Edit So Selecon 7
page 4
Macro Scripts
Add/Edit Parameters... (TV) Ctrl + 1
Asset Tracking... Shi + T
Bevel (Poly) Shi + Ctrl + B
Cap (Poly) Alt + P
Chamfer (Poly) Shi + Ctrl + C
Collapse (Poly) Alt + Ctrl + C
Collect Parameters SV Alt + 3
Collect Parameters TV Alt + 4
Connect (no dialog) (Poly) Shi + Ctrl + E
Create Camera From View Ctrl + C
Cut (Poly) Alt + C
Extrude along Spline (Poly) Alt + E
Geometry Selecon Visibility Toggle Alt + G
Grow Selecon (Poly) Ctrl + Page
Unwrap UVW
Break Selected Verces Ctrl + B
Detach Edge Verts D, Ctrl + D
Edit UVW's Ctrl + E
Filter Selected Faces Alt + F
Freeze Selected Ctrl + F
Get Face Selecon From Stack Alt + Shi + Ctrl + F
Get Selecon From Faces Alt + Shi + Ctrl + P
Hide Selected Ctrl + H
Load UVW Alt + Shi + Ctrl + L
Lock selected verces Space
Mirror Horizontal Alt + Shi + Ctrl + N
Mirror Vercal Alt + Shi + Ctrl + M
Move Horizontal Alt + Shi + Ctrl + J
Move Vercal Alt + Shi + Ctrl + K
Pan Ctrl + P
Planar map faces/patches Enter
Snap Ctrl + S
Texture Vertex Contract Selecon NumPad -, - (minus)
Texture Vertex Expand Selecon NumPad +, = (plus, equals)
Texture Vertex Move Mode W
Texture Vertex Rotate Mode E
Texture Vertex Scale Mode R
Texture Vertex Weld Selected Ctrl + W
Texture Vertex Target Weld Ctrl + T
Unwrap Opons Ctrl + O
Update Map Ctrl + U
Zoom Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Extents Selected Z
Zoom Region Ctrl + X
Zoom To Gizmo Shi + Space
Video Post
Add Image Filter Event Ctrl + F
Add Image Input Event Ctrl + I
Add Image Layer Event Ctrl + L
Add Image Output Event Ctrl + O
Add New Event Ctrl + A
Add Scene Event Ctrl + S
Edit Current Event Ctrl + E
Execute Sequence Ctrl + R
New Sequence Ctrl + N
FFD
Switch To Control Point Level Alt + Shi + C
Switch To Lace Level Alt + Shi + L
Switch To Set Volume Level Alt + Shi + S
Switch To Top Level Alt + Shi + T
Set Tessellaon Preset 1 Alt + 1
Set Tessellaon Preset 2 Alt + 2
Set Tessellaon Preset 3 Alt + 3
So Selecon Ctrl + S
Switch To Curve CV Level Alt + Shi + Z
Switch To Curve Level Alt + Shi + C
Switch To Imports Level Alt + Shi + I
Switch To Point Level Alt + Shi + P
Switch To Surface CV Level Alt + Shi + V
Switch To Surface Level Alt + Shi+ S
Switch To Top Level Alt + Shi + T
Transform Degrade Ctrl + X
WeightTable
Select All Ctrl + A
Select Invert Ctrl + I
Select None Ctrl + D
Particle Flow
Copy Selected In Parcle View Ctrl + C
Parcle Emission Toggle ; (semicolon)
Parcle View Toggle 6
Paste In Parcle View Ctrl + V
Select All In Parcle View Ctrl + A
Selected Parcle Emission Shi + ; (semicolon)
ActiveShade (Scanline)
Inialize P
Update U
page 5
NURBS
CV Constrained Normal Move Alt + N
CV Constrained U Move Alt + U
CV Constrained V Move Alt + V
Display Curves Shi + Ctrl + C
Display Dependents Ctrl + D
Display Laces Ctrl + L
Display Shaded Lace Alt + L
Display Surfaces Shi + Ctrl + S
Display Toolbox Ctrl + T
Display Trims Shi + Ctrl + T
Local Select Sub-Object By Name Ctrl + H
Select Next in U Ctrl + Right Arrow
Select Next in V Ctrl + Up Arrow
Select Previous in U Ctrl + Le Arrow
Select Previous in V Ctrl + Down Arrow
Select Sub-Object By Name H
Biped
Copy/Paste – Copy Alt + C
Copy/Paste - Paste Alt + V
Copy/Paste - Paste Opposite Alt + B
Fix Graphs Alt + Ctrl + F
Move All - Collapse Alt + M
Play Biped V
Reset All Limb Keys Alt + K
Scale In Transform Alt + Ctrl + E
Set Animaon Range Alt + R
Trackbar - Toggle Biped Keys Alt + T
TV Select end of footsteps Alt + D
TV Select enre footstep Alt + S
TV Select start of footsteps Alt + A
Reaction Manager
Set Max Influence Ctrl + I
Set Min Influence Alt + I
WalkThrough
Accelerate Toggle Q
Back S, Down Arrow
Decelerate Toggle Z
Down C, Shi + Down Arrow
Forward W, Up Arrow
Le A, Le Arrow
Level Shi + Space
Lock Vercal Rotaon Space
Reset Step Size Alt + [
Right D, Right Arrow
Up E, Shi + Up Arrow
Edit Normals
Break Normals B
Copy Normal Ctrl + C
Edge Level Ctrl + 3
Face Level Ctrl + 4
Make Explicit E
Normal Level Ctrl + 1
Object Level Ctrl + 0
Paste Normal Ctrl + V
Reset Normals R
Specify Normals S
Unify Normals U
Vertex Level Ctrl + 2
Brush Rotate Shi + Ctrl + 5
Brush Scale Shi + Ctrl + 6
Brush Stand Shi + Ctrl + 2
Brush Translate Shi + Ctrl + 1
Clump Ctrl + M
Cut Ctrl + C
Expand Selecon Shi + Ctrl + E
Guide Ctrl + 2
Hide Selected Shi + Ctrl + H
Ignore Back Shi + Ctrl + B
Invert Selecon Shi + Ctrl + N
Lock Shi + Ctrl + L
Merge Hairgroups Shi + Ctrl + = (equals)
Pop Selected Shi + Ctrl + P
Pop Zerosized Shi + Ctrl + Z
Puff Ctrl + P
Recomb Shi + Ctrl + M
Reset Rest Shi + Ctrl + T
Root Ctrl + 4
Rotate Ctrl + R
Rotate Selecon Shi + Ctrl + R
Scale Ctrl + E
Select Ctrl + S
Show Hidden Shi + Ctrl + W
So Falloff Shi + Ctrl + F
Split Hairgroups Shi + Ctrl + - (minus)
Stand Ctrl + N
Tip Ctrl + 1
Toggle Collisions Shi + Ctrl + C
Toggle Hairs Shi + Ctrl + I
Translate Ctrl + T
Undo Ctrl + Z
Unlock Shi + Ctrl + U
Verts Ctrl + 3
Crowd
Solve S
Quad Menu Sets
Animaon Alt + Right-click
Custom Shi + Ctrl + Alt + Right-click
Custom Shi + Ctrl + Right-click
Lighng | Render Ctrl + Alt + Right-click
Modeling Ctrl + Right-click
reactor Shi + Alt + Right-click
Snap Shi + Right-click
Viewports V
page 6
Hair Styling
Aenuate Shi + Ctrl + A
Brush Ctrl + B
Brush Clump Shi + Ctrl + 4
Brush Puff Shi + Ctrl + 3
Main UI
Adapve Degradaon Toggle O
Advanced LIghng Panel (Scanline) 9
Align Alt + A
Angle Snap Toggle A
Auto Key Mode Toggle N
Background Lock Toggle Alt + Ctrl + B
Backup Time One Unit , (comma)
Boom View B
Camera View C
Clone Ctrl + V
Close Last Acvated Explorer Alt + Ctrl + P
Cycle Acve Snap Type Alt + S
Cycle Selecon Method Ctrl + F
Cycle Snap Hit Alt + Shi + S
Default Lighng Toggle Ctrl + L
Disable Viewport D
Display as See-Through Toggle Alt + X
Environment Dialog Toggle 8
Expert Mode Toggle Ctrl + X
Fetch Alt + Ctrl + F
Forward Time One Unit . (period)
Front View F
Go to End Frame End
Go to Start Frame Home
Hide Cameras Toggle Shi + C
Hide Geometry Toggle Shi + G
Hide Grids Toggle G
Hide Helpers Toggle Shi + H
Hide Lights Toggle Shi + L
Hide Parcle Systems Toggle Shi + P
Hide Shapes Toggle Shi + S
Hide Space Warps Toggle Shi + W
Hold Ctrl + H
Le View L
Lock User Interface Toggle Alt + 0
Material Editor Toggle M
Maximize Viewport Toggle Alt + W
MAXScript Listener F11
New Scene Ctrl + N
Normal Align Alt + N
Open File Ctrl + O
Orbit View Mode Ctrl + R
Orthographic User View U
Pan View Ctrl + P
Pan Viewport I
Percent Snap Toggle Shi + Ctrl + P
Perspecve User View P
Play Animaon / (slash)
Quick Align Shi + A
Redo Scene Operaon Ctrl + Y
Redo Viewport Operaon Shi + Y
Redraw All Views ` (grave accent)
Render Shi + Q
Render Last F9
Render Setup F10
Restrict Plane Cycle F8
Restrict to X F5
Restrict to Y F6
Restrict to Z F7
Save File Ctrl + S
Scale Cycle Ctrl + E
Select All Ctrl + A
Select Ancestor Page Up
Select and Move W
Select and Rotate E
Select By Name H
Select Child Page Down
Select Children Ctrl + Page Down
Select Invert Ctrl + I
Select None Ctrl + D
Select Similar Ctrl + Q
Selecon Lock Toggle Space
Set Key Mode ' (apostrophe)
Set Keys K
Shade Selected Faces Toggle F2
Show Floang Dialogs Ctrl + ` (grave accent)
Show Main Toolbar Toggle Alt + 6
Show Safeframes Toggle Shi + F
Show Selecon Bracket Toggle J
Show Stascs Toggle 7
Snap To Frozen Objects Toggle Alt + F2
Snaps Toggle S
Snaps Use Axis Constraints Toggle Alt + D, Alt + F3
Sound Toggle \ (backslash)
Spacing Tool Shi + I
Spot/Direconal Light View Shi + 4
Sub-object Level 1 1
Sub-object Level 2 2
Sub-object Level 3 3
Sub-object Level 4 4
Sub-object Level 5 5
Sub-object Level Cycle Insert
Sub-object Selecon Toggle Ctrl + B
Top View T
Transform Gizmo Size Down - (minus)
Transform Gizmo Size Up = (equals)
Autodesk 3ds Max 2009 and Autodesk 3ds Max Design 2009 Shortcut Guide
Transform Gizmo Toggle X
Transform Type-In Dialog Toggle F12
Undo Scene Operaon Ctrl + Z
Undo Viewport Operaon Shi + Z
Update Background Image Alt + Shi + Ctrl + B
View Edged Faces Toggle F4
Viewport Background Alt + B
Virtual Viewport Pan Down Number pad 2
Virtual Viewport Pan Le Number pad 4
Virtual Viewport Pan Right Number pad 6
Virtual Viewport Pan Up Number pad 8
Virtual Viewport Toggle Number pad / (slash)
Virtual Viewport Zoom In Number pad + (plus)
Virtual Viewport Zoom Out Number pad - (hyphen)
Wireframe / Smooth + Highlights F3
Zoom Extents Alt + Ctrl + Z
Zoom Extents All Shi + Ctrl + Z
Zoom Extents All Selected Z
Zoom In 2X Alt + Shi + Ctrl + Z
Zoom Mode Alt + Z
Zoom Out 2X Alt + Shi + Z
Zoom Region Mode Ctrl + W
Zoom Viewport In [ (open bracket), Ctrl + = (equals)
Zoom Viewport Out ] (close bracket), Ctrl + - (hyphen)
Expand Object Toggle O
Expand Track Toggle Enter, T
Filters Q
Lock Selecon Space
Lock Tangents Toggle L
Make Controller Unique U
Move Highlight Down Down Arrow
Move Highlight Up Up Arrow
Move Keys M
Nudge Keys Le Le Arrow
Nudge Keys Right Right Arrow
Pan Ctrl + P
Paste Controller Ctrl + V
Scroll Down Ctrl + Down Arrow
Scroll Up Ctrl + Up Arrow
Snap Frames S
Zoom Alt + Z
Zoom Horizontal Extents Alt + Ctrl + Z
Zoom Horizontal Extents Keys Alt + X
Zoom Region Ctrl + W
Material Editor
Background B
Backlight L
Cycle 3X2, 5X3, 6X4 Sample Slots X
Get Material G
Go Backward to Sibling Le Arrow
Go Forward to Sibling Right Arrow
Go to Parent Up Arrow
Make Preview P
Opons O
page 2
Snaps Action Table
Snap To Edge/Segment Toggle Alt + F10
Snap To Endpoint Toggle Alt + F8
Snap To Face Toggle Alt + F11
Snap To Grid Points Toggle Alt + F5
Snap To Midpoint Toggle Alt + F9
Snap To Pivot Toggle Alt + F6
Snap To Vertex Toggle Alt + F7
Scene Explorer
Scene Explorer
Close Last Acvated Explorer Alt + Ctrl + P
Open Explorer: [Last Used] Alt + Ctrl + O
Main UI (continued)
Track View
Add Keys A
Apply Ease Curve Ctrl + E
Apply Mulplier Curve Ctrl + M
Assign Controller C
Copy Controller Ctrl + C
Edit Poly
Affect Backfacing Ctrl + F
Align To Grid G
Align To View V
Aach Shi + A
Aach List Shi + Ctrl + A
Auto Smooth A
Bevel Mode Shi + Ctrl + B
Bevel Sengs Ctrl + B
Border Level 3
Break Shi + B
Cap Alt + P
Chamfer Mode Shi + Ctrl + C
Chamfer Sengs Alt + Ctrl + C
Collapse Shi + L
Connect Shi + Ctrl + E
Connect Edge Sengs Ctrl + N
Constrain to Edges Shi + X
Constrain to Faces X
Create C
Create Shape From Edges Shi + M
Cut Alt + C
Detach Ctrl + D
Edge Level 2
Edit Triangulaon Mode Shi + T
Element Level 5
Extrude along Spline Mode Alt + E
Extrude Mode E
Extrude Sengs Ctrl + E
Flip Normals F
Grow Selecon Ctrl + Page Up
Hide H
Hide Unselected Alt + I
Hinge from Edge Mode L
Hinge from Edge Sengs Ctrl + L
Ignore Backfacing in Selecons Shi + Ctrl + I
Insert Vertex Mode Shi + I
Inset Mode I
Inset Sengs Ctrl + I
Make Planar P
MeshSmooth M
MeshSmooth Sengs Ctrl + M
Object Level 6
Outline Mode O
Outline Sengs Ctrl + O
Polygon Level 4
Quickslice Mode Shi + Ctrl + Q
Remove Shi + R
Remove Isolated Verces Shi + Ctrl + R
Remove Unused Map Verces Alt + Shi + Ctrl + R
Repeat Last Operaon ; (semicolon)
Reset Slice Plane Alt + S
Retriangulate Shi + Ctrl + T
Select By Vertex Alt + V
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shaded Face Toggle Alt + F
Shrink Selecon Ctrl + Page
Down
Slice Shi + S
Slice Plane Mode S
Split Edges Shi + P
Target Weld Mode Shi + Ctrl + W
Tessellate T
Tessellate Sengs Ctrl + T
Unhide All Alt + U
Use So Selecon Ctrl + S
Vertex Level 1
Weld Sengs Ctrl + W
Schematic View
Add Bookmark B
Display Floater D
Filters P
Free All Alt + F
Free Selected Alt + S
Invert Selected Nodes Ctrl + I
Move Children Alt + C
Next Bookmark Right Arrow
Previous Bookmark Le Arrow
Refresh View Ctrl + U
Rename Object R
Select All Nodes Ctrl + A
Select Children Ctrl + C
Select None Ctrl + D
Show Grid G
Toggle Shrink Ctrl + S
Use Connect Tool C
Use Pan Tool Ctrl + P
Use Select Tool S, Q
Use Zoom Region Tool Ctrl + W
Use Zoom Tool Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Selected Extents Z
Schematic View
ActiveShade
Close Q
Draw Region D
Render R
Select Object S
Toggle Toolbar (Docked) Space
page 3
Editable Poly
Bevel Mode Shi + Ctrl + B
Border Level 3
Chamfer Mode Shi + Ctrl + C
Connect Shi + Ctrl + E
Constrain to Edges Shi + X
Cut Alt + C
Edge Level 2
Element Level 5
Extrude Mode Shi + E
Face Level 4
Grow Selecon Ctrl + Page Up
Hide Alt + H
Hide Unselected Alt + I
Object Level 6
Quickslice Mode Shi + Ctrl + Q
Repeat Last Operaon ; (semicolon)
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shrink Selecon Ctrl + Page Down
Target Weld Mode Shi + Ctrl + W
Unhide All Alt + U
Vertex Level 1
Edit/Editable Mesh
Bevel Mode Ctrl + V, Ctrl + B
Chamfer Mode Ctrl + C
Cut Mode Alt + C
Detach Ctrl + D
Edge Invisible Ctrl + I
Edge Level 2
Edge Turn Ctrl + T
Element Level 5
Extrude Mode Ctrl + E
Face Level 3
Polygon Level 4
Vertex Level 1
Weld Selected Ctrl + W
Weld Target Mode Alt + W
Up
Hide (Poly) Alt + H
Hide Unselected (Poly) Alt + I
Isolate Selecon Alt + Q
Meshsmooth (Poly) Ctrl + M
Parameter Collector Alt + 2
Parameter Editor Alt + 1
Parameter Wiring Dialog... Alt + 5
Render Preset Slot A (Shi + click to save)
Render Preset Slot B (Shi + click to save)
Render Preset Slot C (Shi + click to save)
Render to Texture Dialog Toggle O
Repeat Last (Poly) ; (semicolon)
Slice (Poly) Shi + Ctrl + Q
Smart Scale R
Smart Select Q
Start Parameter Wiring... Ctrl + 5
Unhide All (Poly) Alt + U
WalkThrough View Mode Up Arrow
Weld (Poly) Shi + Ctrl + W
Physique
Copy Envelope Ctrl + C
Delete Ctrl + D
Next Page Down
Paste Envelope Ctrl + V
Previous Page Up
Reset Envelopes Ctrl + E
Mesh Select
Mesh Edit So Selecon 7
page 4
Macro Scripts
Add/Edit Parameters... (TV) Ctrl + 1
Asset Tracking... Shi + T
Bevel (Poly) Shi + Ctrl + B
Cap (Poly) Alt + P
Chamfer (Poly) Shi + Ctrl + C
Collapse (Poly) Alt + Ctrl + C
Collect Parameters SV Alt + 3
Collect Parameters TV Alt + 4
Connect (no dialog) (Poly) Shi + Ctrl + E
Create Camera From View Ctrl + C
Cut (Poly) Alt + C
Extrude along Spline (Poly) Alt + E
Geometry Selecon Visibility Toggle Alt + G
Grow Selecon (Poly) Ctrl + Page
Unwrap UVW
Break Selected Verces Ctrl + B
Detach Edge Verts D, Ctrl + D
Edit UVW's Ctrl + E
Filter Selected Faces Alt + F
Freeze Selected Ctrl + F
Get Face Selecon From Stack Alt + Shi + Ctrl + F
Get Selecon From Faces Alt + Shi + Ctrl + P
Hide Selected Ctrl + H
Load UVW Alt + Shi + Ctrl + L
Lock selected verces Space
Mirror Horizontal Alt + Shi + Ctrl + N
Mirror Vercal Alt + Shi + Ctrl + M
Move Horizontal Alt + Shi + Ctrl + J
Move Vercal Alt + Shi + Ctrl + K
Pan Ctrl + P
Planar map faces/patches Enter
Snap Ctrl + S
Texture Vertex Contract Selecon NumPad -, - (minus)
Texture Vertex Expand Selecon NumPad +, = (plus, equals)
Texture Vertex Move Mode W
Texture Vertex Rotate Mode E
Texture Vertex Scale Mode R
Texture Vertex Weld Selected Ctrl + W
Texture Vertex Target Weld Ctrl + T
Unwrap Opons Ctrl + O
Update Map Ctrl + U
Zoom Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Extents Selected Z
Zoom Region Ctrl + X
Zoom To Gizmo Shi + Space
Video Post
Add Image Filter Event Ctrl + F
Add Image Input Event Ctrl + I
Add Image Layer Event Ctrl + L
Add Image Output Event Ctrl + O
Add New Event Ctrl + A
Add Scene Event Ctrl + S
Edit Current Event Ctrl + E
Execute Sequence Ctrl + R
New Sequence Ctrl + N
FFD
Switch To Control Point Level Alt + Shi + C
Switch To Lace Level Alt + Shi + L
Switch To Set Volume Level Alt + Shi + S
Switch To Top Level Alt + Shi + T
Set Tessellaon Preset 1 Alt + 1
Set Tessellaon Preset 2 Alt + 2
Set Tessellaon Preset 3 Alt + 3
So Selecon Ctrl + S
Switch To Curve CV Level Alt + Shi + Z
Switch To Curve Level Alt + Shi + C
Switch To Imports Level Alt + Shi + I
Switch To Point Level Alt + Shi + P
Switch To Surface CV Level Alt + Shi + V
Switch To Surface Level Alt + Shi+ S
Switch To Top Level Alt + Shi + T
Transform Degrade Ctrl + X
WeightTable
Select All Ctrl + A
Select Invert Ctrl + I
Select None Ctrl + D
Particle Flow
Copy Selected In Parcle View Ctrl + C
Parcle Emission Toggle ; (semicolon)
Parcle View Toggle 6
Paste In Parcle View Ctrl + V
Select All In Parcle View Ctrl + A
Selected Parcle Emission Shi + ; (semicolon)
ActiveShade (Scanline)
Inialize P
Update U
page 5
NURBS
CV Constrained Normal Move Alt + N
CV Constrained U Move Alt + U
CV Constrained V Move Alt + V
Display Curves Shi + Ctrl + C
Display Dependents Ctrl + D
Display Laces Ctrl + L
Display Shaded Lace Alt + L
Display Surfaces Shi + Ctrl + S
Display Toolbox Ctrl + T
Display Trims Shi + Ctrl + T
Local Select Sub-Object By Name Ctrl + H
Select Next in U Ctrl + Right Arrow
Select Next in V Ctrl + Up Arrow
Select Previous in U Ctrl + Le Arrow
Select Previous in V Ctrl + Down Arrow
Select Sub-Object By Name H
Biped
Copy/Paste – Copy Alt + C
Copy/Paste - Paste Alt + V
Copy/Paste - Paste Opposite Alt + B
Fix Graphs Alt + Ctrl + F
Move All - Collapse Alt + M
Play Biped V
Reset All Limb Keys Alt + K
Scale In Transform Alt + Ctrl + E
Set Animaon Range Alt + R
Trackbar - Toggle Biped Keys Alt + T
TV Select end of footsteps Alt + D
TV Select enre footstep Alt + S
TV Select start of footsteps Alt + A
Reaction Manager
Set Max Influence Ctrl + I
Set Min Influence Alt + I
WalkThrough
Accelerate Toggle Q
Back S, Down Arrow
Decelerate Toggle Z
Down C, Shi + Down Arrow
Forward W, Up Arrow
Le A, Le Arrow
Level Shi + Space
Lock Vercal Rotaon Space
Reset Step Size Alt + [
Right D, Right Arrow
Up E, Shi + Up Arrow
Edit Normals
Break Normals B
Copy Normal Ctrl + C
Edge Level Ctrl + 3
Face Level Ctrl + 4
Make Explicit E
Normal Level Ctrl + 1
Object Level Ctrl + 0
Paste Normal Ctrl + V
Reset Normals R
Specify Normals S
Unify Normals U
Vertex Level Ctrl + 2
Brush Rotate Shi + Ctrl + 5
Brush Scale Shi + Ctrl + 6
Brush Stand Shi + Ctrl + 2
Brush Translate Shi + Ctrl + 1
Clump Ctrl + M
Cut Ctrl + C
Expand Selecon Shi + Ctrl + E
Guide Ctrl + 2
Hide Selected Shi + Ctrl + H
Ignore Back Shi + Ctrl + B
Invert Selecon Shi + Ctrl + N
Lock Shi + Ctrl + L
Merge Hairgroups Shi + Ctrl + = (equals)
Pop Selected Shi + Ctrl + P
Pop Zerosized Shi + Ctrl + Z
Puff Ctrl + P
Recomb Shi + Ctrl + M
Reset Rest Shi + Ctrl + T
Root Ctrl + 4
Rotate Ctrl + R
Rotate Selecon Shi + Ctrl + R
Scale Ctrl + E
Select Ctrl + S
Show Hidden Shi + Ctrl + W
So Falloff Shi + Ctrl + F
Split Hairgroups Shi + Ctrl + - (minus)
Stand Ctrl + N
Tip Ctrl + 1
Toggle Collisions Shi + Ctrl + C
Toggle Hairs Shi + Ctrl + I
Translate Ctrl + T
Undo Ctrl + Z
Unlock Shi + Ctrl + U
Verts Ctrl + 3
Crowd
Solve S
Quad Menu Sets
Animaon Alt + Right-click
Custom Shi + Ctrl + Alt + Right-click
Custom Shi + Ctrl + Right-click
Lighng | Render Ctrl + Alt + Right-click
Modeling Ctrl + Right-click
reactor Shi + Alt + Right-click
Snap Shi + Right-click
Viewports V
page 6
Hair Styling
Aenuate Shi + Ctrl + A
Brush Ctrl + B
Brush Clump Shi + Ctrl + 4
Brush Puff Shi + Ctrl + 3
Main UI
Adapve Degradaon Toggle O
Advanced LIghng Panel (Scanline) 9
Align Alt + A
Angle Snap Toggle A
Auto Key Mode Toggle N
Background Lock Toggle Alt + Ctrl + B
Backup Time One Unit , (comma)
Boom View B
Camera View C
Clone Ctrl + V
Close Last Acvated Explorer Alt + Ctrl + P
Cycle Acve Snap Type Alt + S
Cycle Selecon Method Ctrl + F
Cycle Snap Hit Alt + Shi + S
Default Lighng Toggle Ctrl + L
Disable Viewport D
Display as See-Through Toggle Alt + X
Environment Dialog Toggle 8
Expert Mode Toggle Ctrl + X
Fetch Alt + Ctrl + F
Forward Time One Unit . (period)
Front View F
Go to End Frame End
Go to Start Frame Home
Hide Cameras Toggle Shi + C
Hide Geometry Toggle Shi + G
Hide Grids Toggle G
Hide Helpers Toggle Shi + H
Hide Lights Toggle Shi + L
Hide Parcle Systems Toggle Shi + P
Hide Shapes Toggle Shi + S
Hide Space Warps Toggle Shi + W
Hold Ctrl + H
Le View L
Lock User Interface Toggle Alt + 0
Material Editor Toggle M
Maximize Viewport Toggle Alt + W
MAXScript Listener F11
New Scene Ctrl + N
Normal Align Alt + N
Open File Ctrl + O
Orbit View Mode Ctrl + R
Orthographic User View U
Pan View Ctrl + P
Pan Viewport I
Percent Snap Toggle Shi + Ctrl + P
Perspecve User View P
Play Animaon / (slash)
Quick Align Shi + A
Redo Scene Operaon Ctrl + Y
Redo Viewport Operaon Shi + Y
Redraw All Views ` (grave accent)
Render Shi + Q
Render Last F9
Render Setup F10
Restrict Plane Cycle F8
Restrict to X F5
Restrict to Y F6
Restrict to Z F7
Save File Ctrl + S
Scale Cycle Ctrl + E
Select All Ctrl + A
Select Ancestor Page Up
Select and Move W
Select and Rotate E
Select By Name H
Select Child Page Down
Select Children Ctrl + Page Down
Select Invert Ctrl + I
Select None Ctrl + D
Select Similar Ctrl + Q
Selecon Lock Toggle Space
Set Key Mode ' (apostrophe)
Set Keys K
Shade Selected Faces Toggle F2
Show Floang Dialogs Ctrl + ` (grave accent)
Show Main Toolbar Toggle Alt + 6
Show Safeframes Toggle Shi + F
Show Selecon Bracket Toggle J
Show Stascs Toggle 7
Snap To Frozen Objects Toggle Alt + F2
Snaps Toggle S
Snaps Use Axis Constraints Toggle Alt + D, Alt + F3
Sound Toggle \ (backslash)
Spacing Tool Shi + I
Spot/Direconal Light View Shi + 4
Sub-object Level 1 1
Sub-object Level 2 2
Sub-object Level 3 3
Sub-object Level 4 4
Sub-object Level 5 5
Sub-object Level Cycle Insert
Sub-object Selecon Toggle Ctrl + B
Top View T
Transform Gizmo Size Down - (minus)
Transform Gizmo Size Up = (equals)
Autodesk 3ds Max 2009 and Autodesk 3ds Max Design 2009 Shortcut Guide
Transform Gizmo Toggle X
Transform Type-In Dialog Toggle F12
Undo Scene Operaon Ctrl + Z
Undo Viewport Operaon Shi + Z
Update Background Image Alt + Shi + Ctrl + B
View Edged Faces Toggle F4
Viewport Background Alt + B
Virtual Viewport Pan Down Number pad 2
Virtual Viewport Pan Le Number pad 4
Virtual Viewport Pan Right Number pad 6
Virtual Viewport Pan Up Number pad 8
Virtual Viewport Toggle Number pad / (slash)
Virtual Viewport Zoom In Number pad + (plus)
Virtual Viewport Zoom Out Number pad - (hyphen)
Wireframe / Smooth + Highlights F3
Zoom Extents Alt + Ctrl + Z
Zoom Extents All Shi + Ctrl + Z
Zoom Extents All Selected Z
Zoom In 2X Alt + Shi + Ctrl + Z
Zoom Mode Alt + Z
Zoom Out 2X Alt + Shi + Z
Zoom Region Mode Ctrl + W
Zoom Viewport In [ (open bracket), Ctrl + = (equals)
Zoom Viewport Out ] (close bracket), Ctrl + - (hyphen)
Expand Object Toggle O
Expand Track Toggle Enter, T
Filters Q
Lock Selecon Space
Lock Tangents Toggle L
Make Controller Unique U
Move Highlight Down Down Arrow
Move Highlight Up Up Arrow
Move Keys M
Nudge Keys Le Le Arrow
Nudge Keys Right Right Arrow
Pan Ctrl + P
Paste Controller Ctrl + V
Scroll Down Ctrl + Down Arrow
Scroll Up Ctrl + Up Arrow
Snap Frames S
Zoom Alt + Z
Zoom Horizontal Extents Alt + Ctrl + Z
Zoom Horizontal Extents Keys Alt + X
Zoom Region Ctrl + W
Material Editor
Background B
Backlight L
Cycle 3X2, 5X3, 6X4 Sample Slots X
Get Material G
Go Backward to Sibling Le Arrow
Go Forward to Sibling Right Arrow
Go to Parent Up Arrow
Make Preview P
Opons O
page 2
Snaps Action Table
Snap To Edge/Segment Toggle Alt + F10
Snap To Endpoint Toggle Alt + F8
Snap To Face Toggle Alt + F11
Snap To Grid Points Toggle Alt + F5
Snap To Midpoint Toggle Alt + F9
Snap To Pivot Toggle Alt + F6
Snap To Vertex Toggle Alt + F7
Scene Explorer
Scene Explorer
Close Last Acvated Explorer Alt + Ctrl + P
Open Explorer: [Last Used] Alt + Ctrl + O
Main UI (continued)
Track View
Add Keys A
Apply Ease Curve Ctrl + E
Apply Mulplier Curve Ctrl + M
Assign Controller C
Copy Controller Ctrl + C
Edit Poly
Affect Backfacing Ctrl + F
Align To Grid G
Align To View V
Aach Shi + A
Aach List Shi + Ctrl + A
Auto Smooth A
Bevel Mode Shi + Ctrl + B
Bevel Sengs Ctrl + B
Border Level 3
Break Shi + B
Cap Alt + P
Chamfer Mode Shi + Ctrl + C
Chamfer Sengs Alt + Ctrl + C
Collapse Shi + L
Connect Shi + Ctrl + E
Connect Edge Sengs Ctrl + N
Constrain to Edges Shi + X
Constrain to Faces X
Create C
Create Shape From Edges Shi + M
Cut Alt + C
Detach Ctrl + D
Edge Level 2
Edit Triangulaon Mode Shi + T
Element Level 5
Extrude along Spline Mode Alt + E
Extrude Mode E
Extrude Sengs Ctrl + E
Flip Normals F
Grow Selecon Ctrl + Page Up
Hide H
Hide Unselected Alt + I
Hinge from Edge Mode L
Hinge from Edge Sengs Ctrl + L
Ignore Backfacing in Selecons Shi + Ctrl + I
Insert Vertex Mode Shi + I
Inset Mode I
Inset Sengs Ctrl + I
Make Planar P
MeshSmooth M
MeshSmooth Sengs Ctrl + M
Object Level 6
Outline Mode O
Outline Sengs Ctrl + O
Polygon Level 4
Quickslice Mode Shi + Ctrl + Q
Remove Shi + R
Remove Isolated Verces Shi + Ctrl + R
Remove Unused Map Verces Alt + Shi + Ctrl + R
Repeat Last Operaon ; (semicolon)
Reset Slice Plane Alt + S
Retriangulate Shi + Ctrl + T
Select By Vertex Alt + V
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shaded Face Toggle Alt + F
Shrink Selecon Ctrl + Page
Down
Slice Shi + S
Slice Plane Mode S
Split Edges Shi + P
Target Weld Mode Shi + Ctrl + W
Tessellate T
Tessellate Sengs Ctrl + T
Unhide All Alt + U
Use So Selecon Ctrl + S
Vertex Level 1
Weld Sengs Ctrl + W
Schematic View
Add Bookmark B
Display Floater D
Filters P
Free All Alt + F
Free Selected Alt + S
Invert Selected Nodes Ctrl + I
Move Children Alt + C
Next Bookmark Right Arrow
Previous Bookmark Le Arrow
Refresh View Ctrl + U
Rename Object R
Select All Nodes Ctrl + A
Select Children Ctrl + C
Select None Ctrl + D
Show Grid G
Toggle Shrink Ctrl + S
Use Connect Tool C
Use Pan Tool Ctrl + P
Use Select Tool S, Q
Use Zoom Region Tool Ctrl + W
Use Zoom Tool Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Selected Extents Z
Schematic View
ActiveShade
Close Q
Draw Region D
Render R
Select Object S
Toggle Toolbar (Docked) Space
page 3
Editable Poly
Bevel Mode Shi + Ctrl + B
Border Level 3
Chamfer Mode Shi + Ctrl + C
Connect Shi + Ctrl + E
Constrain to Edges Shi + X
Cut Alt + C
Edge Level 2
Element Level 5
Extrude Mode Shi + E
Face Level 4
Grow Selecon Ctrl + Page Up
Hide Alt + H
Hide Unselected Alt + I
Object Level 6
Quickslice Mode Shi + Ctrl + Q
Repeat Last Operaon ; (semicolon)
Select Edge Loop Alt + L
Select Edge Ring Alt + R
Shrink Selecon Ctrl + Page Down
Target Weld Mode Shi + Ctrl + W
Unhide All Alt + U
Vertex Level 1
Edit/Editable Mesh
Bevel Mode Ctrl + V, Ctrl + B
Chamfer Mode Ctrl + C
Cut Mode Alt + C
Detach Ctrl + D
Edge Invisible Ctrl + I
Edge Level 2
Edge Turn Ctrl + T
Element Level 5
Extrude Mode Ctrl + E
Face Level 3
Polygon Level 4
Vertex Level 1
Weld Selected Ctrl + W
Weld Target Mode Alt + W
Up
Hide (Poly) Alt + H
Hide Unselected (Poly) Alt + I
Isolate Selecon Alt + Q
Meshsmooth (Poly) Ctrl + M
Parameter Collector Alt + 2
Parameter Editor Alt + 1
Parameter Wiring Dialog... Alt + 5
Render Preset Slot A (Shi + click to save)
Render Preset Slot B (Shi + click to save)
Render Preset Slot C (Shi + click to save)
Render to Texture Dialog Toggle O
Repeat Last (Poly) ; (semicolon)
Slice (Poly) Shi + Ctrl + Q
Smart Scale R
Smart Select Q
Start Parameter Wiring... Ctrl + 5
Unhide All (Poly) Alt + U
WalkThrough View Mode Up Arrow
Weld (Poly) Shi + Ctrl + W
Physique
Copy Envelope Ctrl + C
Delete Ctrl + D
Next Page Down
Paste Envelope Ctrl + V
Previous Page Up
Reset Envelopes Ctrl + E
Mesh Select
Mesh Edit So Selecon 7
page 4
Macro Scripts
Add/Edit Parameters... (TV) Ctrl + 1
Asset Tracking... Shi + T
Bevel (Poly) Shi + Ctrl + B
Cap (Poly) Alt + P
Chamfer (Poly) Shi + Ctrl + C
Collapse (Poly) Alt + Ctrl + C
Collect Parameters SV Alt + 3
Collect Parameters TV Alt + 4
Connect (no dialog) (Poly) Shi + Ctrl + E
Create Camera From View Ctrl + C
Cut (Poly) Alt + C
Extrude along Spline (Poly) Alt + E
Geometry Selecon Visibility Toggle Alt + G
Grow Selecon (Poly) Ctrl + Page
Unwrap UVW
Break Selected Verces Ctrl + B
Detach Edge Verts D, Ctrl + D
Edit UVW's Ctrl + E
Filter Selected Faces Alt + F
Freeze Selected Ctrl + F
Get Face Selecon From Stack Alt + Shi + Ctrl + F
Get Selecon From Faces Alt + Shi + Ctrl + P
Hide Selected Ctrl + H
Load UVW Alt + Shi + Ctrl + L
Lock selected verces Space
Mirror Horizontal Alt + Shi + Ctrl + N
Mirror Vercal Alt + Shi + Ctrl + M
Move Horizontal Alt + Shi + Ctrl + J
Move Vercal Alt + Shi + Ctrl + K
Pan Ctrl + P
Planar map faces/patches Enter
Snap Ctrl + S
Texture Vertex Contract Selecon NumPad -, - (minus)
Texture Vertex Expand Selecon NumPad +, = (plus, equals)
Texture Vertex Move Mode W
Texture Vertex Rotate Mode E
Texture Vertex Scale Mode R
Texture Vertex Weld Selected Ctrl + W
Texture Vertex Target Weld Ctrl + T
Unwrap Opons Ctrl + O
Update Map Ctrl + U
Zoom Alt + Z
Zoom Extents Alt + Ctrl + Z
Zoom Extents Selected Z
Zoom Region Ctrl + X
Zoom To Gizmo Shi + Space
Video Post
Add Image Filter Event Ctrl + F
Add Image Input Event Ctrl + I
Add Image Layer Event Ctrl + L
Add Image Output Event Ctrl + O
Add New Event Ctrl + A
Add Scene Event Ctrl + S
Edit Current Event Ctrl + E
Execute Sequence Ctrl + R
New Sequence Ctrl + N
FFD
Switch To Control Point Level Alt + Shi + C
Switch To Lace Level Alt + Shi + L
Switch To Set Volume Level Alt + Shi + S
Switch To Top Level Alt + Shi + T
Set Tessellaon Preset 1 Alt + 1
Set Tessellaon Preset 2 Alt + 2
Set Tessellaon Preset 3 Alt + 3
So Selecon Ctrl + S
Switch To Curve CV Level Alt + Shi + Z
Switch To Curve Level Alt + Shi + C
Switch To Imports Level Alt + Shi + I
Switch To Point Level Alt + Shi + P
Switch To Surface CV Level Alt + Shi + V
Switch To Surface Level Alt + Shi+ S
Switch To Top Level Alt + Shi + T
Transform Degrade Ctrl + X
WeightTable
Select All Ctrl + A
Select Invert Ctrl + I
Select None Ctrl + D
Particle Flow
Copy Selected In Parcle View Ctrl + C
Parcle Emission Toggle ; (semicolon)
Parcle View Toggle 6
Paste In Parcle View Ctrl + V
Select All In Parcle View Ctrl + A
Selected Parcle Emission Shi + ; (semicolon)
ActiveShade (Scanline)
Inialize P
Update U
page 5
NURBS
CV Constrained Normal Move Alt + N
CV Constrained U Move Alt + U
CV Constrained V Move Alt + V
Display Curves Shi + Ctrl + C
Display Dependents Ctrl + D
Display Laces Ctrl + L
Display Shaded Lace Alt + L
Display Surfaces Shi + Ctrl + S
Display Toolbox Ctrl + T
Display Trims Shi + Ctrl + T
Local Select Sub-Object By Name Ctrl + H
Select Next in U Ctrl + Right Arrow
Select Next in V Ctrl + Up Arrow
Select Previous in U Ctrl + Le Arrow
Select Previous in V Ctrl + Down Arrow
Select Sub-Object By Name H
Biped
Copy/Paste – Copy Alt + C
Copy/Paste - Paste Alt + V
Copy/Paste - Paste Opposite Alt + B
Fix Graphs Alt + Ctrl + F
Move All - Collapse Alt + M
Play Biped V
Reset All Limb Keys Alt + K
Scale In Transform Alt + Ctrl + E
Set Animaon Range Alt + R
Trackbar - Toggle Biped Keys Alt + T
TV Select end of footsteps Alt + D
TV Select enre footstep Alt + S
TV Select start of footsteps Alt + A
Reaction Manager
Set Max Influence Ctrl + I
Set Min Influence Alt + I
WalkThrough
Accelerate Toggle Q
Back S, Down Arrow
Decelerate Toggle Z
Down C, Shi + Down Arrow
Forward W, Up Arrow
Le A, Le Arrow
Level Shi + Space
Lock Vercal Rotaon Space
Reset Step Size Alt + [
Right D, Right Arrow
Up E, Shi + Up Arrow
Edit Normals
Break Normals B
Copy Normal Ctrl + C
Edge Level Ctrl + 3
Face Level Ctrl + 4
Make Explicit E
Normal Level Ctrl + 1
Object Level Ctrl + 0
Paste Normal Ctrl + V
Reset Normals R
Specify Normals S
Unify Normals U
Vertex Level Ctrl + 2
Brush Rotate Shi + Ctrl + 5
Brush Scale Shi + Ctrl + 6
Brush Stand Shi + Ctrl + 2
Brush Translate Shi + Ctrl + 1
Clump Ctrl + M
Cut Ctrl + C
Expand Selecon Shi + Ctrl + E
Guide Ctrl + 2
Hide Selected Shi + Ctrl + H
Ignore Back Shi + Ctrl + B
Invert Selecon Shi + Ctrl + N
Lock Shi + Ctrl + L
Merge Hairgroups Shi + Ctrl + = (equals)
Pop Selected Shi + Ctrl + P
Pop Zerosized Shi + Ctrl + Z
Puff Ctrl + P
Recomb Shi + Ctrl + M
Reset Rest Shi + Ctrl + T
Root Ctrl + 4
Rotate Ctrl + R
Rotate Selecon Shi + Ctrl + R
Scale Ctrl + E
Select Ctrl + S
Show Hidden Shi + Ctrl + W
So Falloff Shi + Ctrl + F
Split Hairgroups Shi + Ctrl + - (minus)
Stand Ctrl + N
Tip Ctrl + 1
Toggle Collisions Shi + Ctrl + C
Toggle Hairs Shi + Ctrl + I
Translate Ctrl + T
Undo Ctrl + Z
Unlock Shi + Ctrl + U
Verts Ctrl + 3
Crowd
Solve S
Quad Menu Sets
Animaon Alt + Right-click
Custom Shi + Ctrl + Alt + Right-click
Custom Shi + Ctrl + Right-click
Lighng | Render Ctrl + Alt + Right-click
Modeling Ctrl + Right-click
reactor Shi + Alt + Right-click
Snap Shi + Right-click
Viewports V
page 6
Hair Styling
Aenuate Shi + Ctrl + A
Brush Ctrl + B
Brush Clump Shi + Ctrl + 4
Brush Puff Shi + Ctrl + 3
This manual suits for next models
1
Other Autodesk Software manuals
Autodesk
Autodesk NAVISWORKS User manual
Autodesk
Autodesk AUTOCAD MAP 3D User manual
Autodesk
Autodesk AUTOCAD PLANT 3D 2011 - SYSTEM REQUIREMENTS User manual
Autodesk
Autodesk 15606-011408-9330 - MAPGUIDE R6.3 SITE LIC-UPG... Instruction Manual
Autodesk
Autodesk COMBUSTION-4 - Acad Full-seat Windows... Installation and maintenance instructions
Autodesk
Autodesk AUTOSKETCH 8 User manual
Autodesk
Autodesk AUTOCAD MAP 3D - BROCHURE 2 User manual
Autodesk
Autodesk AUTOCAD ARCHITECTURE User manual
Autodesk
Autodesk 12812-051462-9011 - 3DS MAX 9 COM LEGACY SLM Reference guide
Autodesk
Autodesk AUTODESK SHOWCASE 2011 - SYSTEM REQUIREMENTS Assembly Instructions
Autodesk
Autodesk 24108-051400-9000 - AutoCAD Revit Architecture Suite... User manual
Autodesk
Autodesk ALIAS SURFACE User manual
Autodesk
Autodesk AUTOCAD RASTER DESIGN User manual
Autodesk
Autodesk 23802-091408-9325 - UPG DWF COMPOSER 2 User manual
Autodesk
Autodesk 64006-051108-9001 - Discreet Cleaner - Mac User manual
Autodesk
Autodesk STAND-ALONE LICENSING User manual
Autodesk
Autodesk CAICE VISUAL SURVEY 10 User manual
Autodesk
Autodesk 057B1-41A111-1001 - AutoCAD LT 2010 User manual
Autodesk
Autodesk AUTOSKETCH 10 - SYSTEM REQUIREMENTS User manual
Autodesk
Autodesk 23703-010008-1600A - Civil 3D 2006... User manual
Popular Software manuals by other brands
Allworx
Allworx 9102 Quick reference guide
Red Hat
Red Hat JBoss Developer Studio 3.0 datasheet
Samsung
Samsung UN40C7000WF user manual
Novell
Novell LINUX ENTERPRISE SERVER 10 - INSTALLATION AND ADMINISTRATION... Installation
Symantec
Symantec Veritas CommandCentral 5.1 Getting started guide
Kyocera
Kyocera TASKalfa 3051ci Operation guide
Novell
Novell GROUPWISE 7 - SECURITY POLICIES Installation and administration guide
Panasonic
Panasonic WJ-ND300 Administrator Console operating instructions
ESET
ESET SMART SECURITY 4 datasheet
Royal
Royal Registerlink user guide
Adobe
Adobe 23102480 - Photoshop CS3 - PC Programming guide
Adobe
Adobe 65029902 - Robohelp Server - PC Using