AutoFon D-Mayak User manual

USER MANUAL
Autonomous
security & searching
device with the RFID tag
determines location via GPS,
sends the information via GSM network as text
message or GPRS package,
operates a long time autonomously.
Moscow
Ltd. «AutoFon»
AutoFon D-Mayak
18_05_2016

AutoFon D-Mayak
2
PREFACE
Thank you for purchasing AutoFon D-Mayak. This manual shows
how to operate the device smoothly and correctly. Make sure to
read this manual carefully before using this product. Please note
that specication and information are subject to change without
prior notice in this manual.
Any changes will be integrated in the latest release.
If you have any problems using or setting up the device, don’t
hesitate to contact us via email [email protected]u
PREFACE

AutoFon D-Mayak 3
TABLE OF CONTENTS
TABLE OF CONTENTS
FUNCTIONS.....................................................4
WHERE TO LOCATE .............................................4
OPERATION PRINCIPLE .........................................5
SPECIFICATIONS................................................7
DEVICE SCHEME ................................................8
WHAT’S INCLUDED ..............................................8
GETTING STARTED..............................................9
MAIN OPERATING MODES .....................................10
COMMANDS TO CONTROL THE DEVICE ........................11
CHANGING GENERAL SETTINGS AND CUSTOMISATION ........19
USING THE BUILTIN ACCELEROMETER .........................25
GPRSMONITORING ...........................................26
USING THE RFID tag (replacing battery) .........................28
FIRMWARE UPDATE FOR AUTOFON DMAYAK VIA GPRS ........30
WORKING WITH EXTERNAL DEVICES ...........................31
WIRING SCHEMA ...............................................31
INFORMATION SMS
PARAMETERS DESCRIPTION .............................. 32-33
LIST OF SMSCOMMANDS .....................................34
LED INDICATION...............................................36
FAULTS & SOLUTIONS..........................................37
WARRANTIES ..................................................39

AutoFon D-Mayak
4
FUNCTIONS
FUNCTIONS
«AutoFon D-Mayak» is a new product based on GSM/GPRS network and
GLONASS/GPS satellite positioning system, which set multiple functions as
security, positioning, monitoring surveillance, emergency alarms and track-
ing device. It can track and monitor the remote target by SMS or internet.
This device can be used as
• Portable Emergency Bell for Elderly/Kids Care.
• Tracking/Recording of Business Trips.
• Vehicle Tracking, Fleet Management and Anti-theft Alarm.
• Searching stolen cars, motorcycles, bicycles etc.
• Asset Guarding and Tracking.
• Tracking of Pets and Animals.
• Notifying about car evacuation.
WHERE TO LOCATE
Accurate GPS/GLONASS coordinates are guaranteed only if the device is
within sky-sight range. However, signal may weaken; in which case GPS/
GLONASS coordinates can still be provided accurately.
Locate the device so its logo is upside and is not covered by metal objects.
The location must provide stable connection with the RFID tag.

AutoFon D-Mayak 5
AutoFon D-Mayak has a GSM/GPRS-modem, GPS/GLONASS-
receiver, microprocessor, and an independent power source.
Autonomy and the small size of this device, allows it to be hidden
into the most hard to nd and unexpected places. It is dicult to de-
tect the device with GSM-signal detectors because it is in hiberna-
tion most of the time.
During interval mode the device is active only for a few minutes.
When the device is oine, internal batteries allow
AutoFon D-Mayak to operate in interval mode by activating it for a
few minutes. In this mode the device consumes little battery power.
Interval mode does not allow instantaneous communication with the
device – it will execute commands during the next online session.
The communication interval can be set from 15 minutes to 30 days.
When operating in interval mode, the device hibernates most of the
time and wakes up by Alarm clock, which can be setted up up to 4
dierent modes.
G - GPS and GSM-coordinates detection
The device determines location by satellites and sends a message
with the exact coordinates in a format specied by the conguration
command: SETUP= (parameter 8, page 20). Coordinates are either
in the form of numerical data or hyperlinks to dierent map servers
(Google Maps and Yandex.Maps). Additional parameters (date and
time positioning, speed, etc.) can also be delivered within the message.
S - GSM-coordinates detection mode
The device sends an SMS-message with IDs of four nearby GSM base
stations, level of signal strength from the current GSM base station,
the device’s temperature, battery charge and operating mode. This
mode is used when it is not necessary to determine exact coordinates.
F - Standby mode
The most economical operation mode. The device is activated by
set alarm time, turns the GSM-module on and waits SMS-messages.
After receiving the command, the device executes it. If there is no
command, the device starts hibernating until the next session.
OPERATION PRINCIPLE
OPERATION PRINCIPLE

AutoFon D-Mayak
6
A - audio control mode
Within each activation set in alarms «Alarm Clock T1/T2», the device
will call admin and turn built-in microphone on to bug the area
around.
If this mode does not satisfy requirements AutoFon D-Mayak can
also work in active mode and respond immediately, the battery
life in this case is lasts up to 10 days. When choosing this mode,
we recommend connecting to an external power source. Keep in
mind that during active mode the device can be easily detected
by GSM scanners.
AutoFon D-Mayak determines its position by GPS and sends it to
the owner via SMS or to the monitoring server in GPRS packets. Apart
from coordinates the device also sends LBS information. This infor-
mation can help to determine the location without satellites’connec-
tivity. Furthermore, SMS displays the current speed and the direc-
tion of movement. service information in the message includes date
and time of activation, battery charge, temperature inside the device,
mode, the number of satellites being found, GSM signal strength lev-
el, the time it took to determine the coordinates, the number of sent
SMS- messages, and other useful information.
AutoFon D-Mayak has a microphone that allows to bug the room
(about 5 meters) around the device with an SMS-command that tells
the device to make an incoming call. AutoFon D-Mayak can option-
ally be connected to a car alarm system. If the sensor activates, even
if the device is in sleeping mode, admin receives an SMS-report to
which coordinates can be included. It is also possible to send an SMS
to activate the external control system, such as the engine’s start, stop
system, front lights, etc.
The device sends a warning SMS-message when turning o the ex-
ternal power.
AutoFon D-Mayak can change mode depending on external pow-
er or moving.
The device checks for battery status and if necessary, reports their
discharge. If the message was not sent the device will attempt again.
AutoFon D-Mayak has a digital accelerometer. That is how move-
ment, turn, shock, fall, crash factors can be detected and the device
will inform by SMS-message and / or change to active mode.
OPERATION PRINCIPLE

AutoFon D-Mayak 7
The RFID tag is used to avoid non-relevant notications. Before send-
ing an alarm message (movement/shock detected, external power
turned on/o, output channel on) the device searches the RFID tag
and if the RFID tag has been detected, an alarm message won’t be
sent.
The device control is possible from any mobile phone by sending
SMS-messages with the correct password.
OPERATION PRINCIPLE
SPECIFICATIONS
• Dimensions non-hermetic case 70 х 23 х 51mm, weight 98 g.
• Dimensions hermetic case 79 х 28 х 55 mm, weight 116 g.
• External power supply +9 ... 30 V through pcb connector («SE+»
online)
• Build-in batteries type CR123A.
• Current in hibernation is less than 15 mA, hibernation with
movement control - 25 mA, online - 3 mA, searching GPS/GLONASS
satellites - 50 mA, sending GPRS-package and audio control- 500 mA.
• Built-in GSM / GPRS-modem 900/1800 MHz
• GPS coordinate accuracy is up to 5 m (ideal conditions), 5-20 m
(typical), up to 300 m (weak or reection signal).
• Multi LBS GSM technology positioning accuracy is 100-500 meters
within the city, 0,5 - 30 km outside the city. The device sends data
to four nearest GSM base station (MCC, MNC, LAC, CID parameters).
• Up to 2 years battery life in interval mode
• Up to 10 days battery life in online mode
• RFID tag batterie type CR2025
• Operation Temperature -35 ... +70 ° C.

AutoFon D-Mayak
8
4 pin external
power and
cable connector
WHAT’S INCLUDED
• «AutoFon D-Mayak» – 1 pc.
• Lithium Battery CR123A – 2 pcs.
• RFID tag – 1 pc.
• Battery for RFID tag CR2025 – 1 pc.
• User’s guide – 1 pc.
• Short plastic card guide – 1 pc.
• Package box – 1 pc.
• Adhesive tape – 1 pc.
• External power connector and cable – 1 pc.
• SIM-card – 1 pc.
GLONASS/GPS-antenna
LED
Indicator
Top board
Build-in
microphone SIM-card
Clips
connecting
to the сap
Lithium Batteries
CR123A
3.0V
DEVICE SCHEME
Slot for wire connection
SOS-Button
Bottom board
RFID tag
DEVICE SCHEME

AutoFon D-Mayak 9
step 1. Insert SIM-card
1. Carefully disassemble the case of the device by hook-
ing plastic upper case clips using thin screwdriver.
2. Insert the SIM-card into the holder.
GETTING STARTED
step 2. Turning power on
Insert the batteries according to the polarity markings. Then the
status LED will blink twice to indicate that the device is ready to
work.
step 3. Authorization (setting admin number)
1234,[phone]
Send SMS 1234,+your_cell_phone_number to the
device to set up an authorized number to get all
messages from the tracker:
1234– default password,
[phone] – will be set up as the authorized
number. It should be in international number format.
Wait a few minutes to receive an answer, so that the
number is successfully authorized
step 4. Setting the currend date and time
1234,GMT=03
Send SMS 1234,GMT=xx, where xx is your timezone.
Date and time will be set by satellites. Therefore, the
device has requires to be located in order to nd them.
If it is not possible to set date and time this way, send an
SMS command 1234,time=year+month+year,hours+mi
nutes
GETTING STARTED

AutoFon D-Mayak
10
MAIN OPERATING MODES
G - GPS/GLONASS-coordinates detection
The device determines location by satellites and sends a message
with the exact coordinates in a format specied by the conguration
command: SETUP= (parameter 8, page 20). Coordinates are either
in the form of numerical data or hyperlinks to dierent map servers
(Google Maps and Yandex.Maps). Additional parameters (date and
time positioning, speed, etc.) can also be delivered within the message.
S - GSM-coordinates detection mode
The device sends an SMS-message with IDs of four nearby GSM base
stations, level of signal strength from the current GSM base station,
the device’s temperature, battery charge and operating mode. This
mode is used when it is not necessary to determine exact coordinates.
F - Standby mode
The most economical operation mode. The device is activated by
set alarm time, turns the GSM-module on and waits SMS- messages.
After receiving the command, the device executes it. If there is no
command, the device starts hibernating until the next session.
To avoid SIM card blocking due to long inactivity, note that it
is impossible to set «Alarm T2» in F mode!
A - audio control mode
Within each activation set in alarms «Alarm Clock T1/T2», the
device will call admin and turn built-in microphone on to bug
the area around. Maximal audio monitoring time can be set in
command SETUP= (parameter 5 p. 21). There will be three attempts
(with an interval of 1 minute between each of them). After
nishing, the device will stay online for 5 more minutes to wait for
an SMS-command or a call.
The device can operate either in one mode or in a combination of
several (up to 5) modes with one «alarm clock» each.
MAIN OPERATING MODES

AutoFon D-Mayak 11
COMMANDS TO CONTROL THE DEVICE
The device control is performed by sending SMS-commands to the
SIM card installed in it. At the beginning of each SMS-message the
password should be typed (4 digits and separator - «comma»).
It is not case sensitive. Additional symbols including «Space» aren’t
allowed. SMS-messages with an incorrect password or non-Latin
letters are not responded.
If several SMS-messages are sent, AutoFon D-Mayak will only pay
attention to the last one. If you want to send several messages, do it
consistently, one by one, waiting for an SMS- conrmation for each
command. After receiving and executing commands, the device
stays online for the time set in setup, waiting for the next possible
command.
If it was not possible for AutoFon D-Mayak to sent an SMS (probable
causes being no GSM network, no money on the SIM card), it will
make additional attempts and then it will return to set mode and
send these SMS-messages when possible.
All parameters and settings are stored in nonvolatile memory,
thus they do not change because of the replacement of
batteries or SIM-card.
Type your four-digit password instead of the word «password»
COMMANDS TO CONTROL THE DEVICE

AutoFon D-Mayak
12
Setting active mode
(password,online)
With this SMS the device is set to active
mode, the device is always online.
Commands are also executed in real time.
Batteries in this mode last up to 10 days if GPRS monitoring is o
and up to 48 hours if GPRS monitoring is enabled.
Setting interval mode
(password,sleep)
With this SMS the device is set to
interval mode. It will turn to online
mode (at the time set in the alarm
clock) or because of sensor activation;
such as moving, pressing the SOS-button, activating an external
alarm input, etc. The rest of the time it hibernates.
Choosing SMS language
(password,eng) или(password,rus)
Using this command you can change the
language of text messages sending by
AutoFon-Mayak.
AutoFon D-Mayak v6.1a
Bat.: 6.16 V (82%) Т: +34 °С
Mode: sleep
sms#1
1234,sleep
AutoFon D-Mayak v6.1a
Bat.: 6.16 V (82%) Т: +34 °С
Mode: online
sms#1
1234,online
AutoFon D-Mayak v6.1a
04-03-2012 13:45:04
1: [phone]
IMEI: 359231039333995
SETUP=1125561721
011119111000000
Output channel on.
Bat: 6.16 V (82%) Т: +34 °С
Mode: sleep
sms#11
1234,eng
The letters limit in english exceed
the limit in russian language
twice, therefore SMS-messages in
russian can be more expensive.
COMMANDS TO CONTROL THE DEVICE

AutoFon D-Mayak 13
Setting the Current Date and Time from
satelites (password,GMT=xx)
(GMT=xx) where:
XX is your timezone from 00 till 14.
1234,GMT=04 for Moscow, Russia.
Date and time will be set from satellites sig-
nals. Therefore, the device has to be located in order to nd them.
If it is not possible to set date and time this way, you can also use com-
mand TIME=
Setting current date and time
(password,TIME=ddmmyyyy,hhxx)
dd (day) in the range 01…31;
mm (month) in the range 01…12;
yyyy (year) in the range 2010…2100;
hh(hour) in the range 00…23;
xx(минуты) in the range 00…59.
The data are checked to be valide. The time will be setted at the
moment when the device reads the message
Changing «Alarm T1/T2» mode and /
or intervals only
(password,Tn=mode)
(password,Tn=interval)
(password,Tn=interval,mode)
To change Alarm T1/T2 operation mode
only, send the command:
password,Tn=mode
n - 1 or 2 - alarm number, mode - the letter F, S, G, A or their
combination.
Similarly, it is possible to change the activation interval for each alarm
with the following command: password,Tn=interval, To change
interval and mode at the same time use: password,Tn=interval,mode.
Command parameters are identical to the settings of the command
below.
AutoFon D-Mayak v6.1a
04-03-2012 13:45:04
Bat.: 6.16 V (82%) Т: +34 °С
1234,gmt=03
AutoFon D-Mayak v6.1a
02-12-2012 14:05:04
Bat.: 6.16 V (82%) Т: +34 °С
1234,time=02012012,1405
COMMANDS TO CONTROL THE DEVICE
AutoFon D-Mayak v6.1a
Т1: 05-03-2012 12:00,15M,S
T2: 12-03-2012 15:30,07D,G
Bat.: 6.16 V (82%) Т: +34 °С
1234,t1=s

AutoFon D-Mayak
14
Setting the date, time, and mode
«Alarm T1/T2»
(password,Тn=ddmmyy,hhxx,interval
,mode)
n - 1 or 2 - number of the alarm, dd (day)
in the range of 01…31; mm (month) -
01…12; yyyy (year) - 2012…2100; hh (hour) - 00…23; xx (minutes)
- 00…59.
The possible values (two digits + one letter) for intervals are:
• 15 to 59 for the letter M(minutes),
• 01 to 23 for the letter H(hours),
• 01 to 30 for the letter D(days).
Mode - the letters F, S, G, A
Setting the mode combination for
Alarm Т1/Т2
А, F, G, S (page 10)
Time and date correction is checked.The
time of installation - time of reading this
SMS by the device.When the alarm time
of the device expires, it goes online and starts the algorithm mode
set in the alarm clock.
Each time the device puts alarm clock forward on set interval.
Alarms are equal, but it’s not allowed to set Fmode on «T2».
Multiple modes of operation executed in appearing order.
Default settings: T1=02012012,1200,01D,F
T2=02012012,1200,07D,G
COMMANDS TO CONTROL THE DEVICE
AutoFon D-Mayak v6.1a
Т1: 05-03-2012 12:00,15M,F
T2: 12-03-2012 15:30,07D,G
Bat.: 6.16 V (82%) Т: +34 °С
1234,t1=05032012,1300,15m,f
AutoFon D-Mayak v6.1a
Т1: 05-03-2012 12:00,30M,GA
T2: 12-03-2012 15:30,07D,G
Bat.: 6.16 V (82%) Т: +34 °С
1234,t1=05032012,1300,30m,GA

AutoFon D-Mayak 15
Single GPS-coordinates denition
request
(password,G)
The device sends a message with GPS
coordinates in the format specied by
parameter № 8 in SETUP=xxx...xxx.
Depending on the settings, coordinates
are displayed in one of the multiple
standard formats or as a hyperlink
indicating the location. The coordinates
can be accompanied by date and time
of positioning, speed and direction of
movement, current GSM base station
identiers, etc. If the GPS-satellites were
not found, the device sends an SMS with
the location determined by base stations
on the GSM (LBS-location method).
Single GSM-coordinates denition
request (Multi LBS)
(password,S)
The device sends an SMS-message with
the identiers of the current and the next
three GSM-base stations, temperature,
battery charge and operation mode.
This data allows to specify location. The
parameter indicating GSM-signal level is
also sent in the message. The smaller the
value, the better the reception. In s mode,
SMS-messages in english allows for 160
symbols.
Autofon D-Mayak v6.1d
04-03-2012 13:45:04
Sat.: 4 at 47s.
N55 52.7213
E037 36.1908
Speed: 73 km/h
Altitude: 177 m
Accur.: 10 m
Bat.: 6.16 V (82%) T: +34 °С
Mode: sleep
sms#11
Autofon D-Mayak v6.1d
04-03-2012 13:45:04
Command ok. Wait
Bat.: 6.16 V (82%) T: +34 °С
Mode: sleep
sms#11
1234,G
AutoFon D-Mayak v6.1a
01-01-2012 12:05:00
GSM -52dB LBS:
MCC=250
MNC=01
LAC: 9472 9472 9472 9472
CID: 893C 8940 1725 1727
T1: 02-01-2012 12:00 01D,S
T2: 02-01-2012 12:00,07D,G
Bat.:.5.85 В.(100%) Т: +25 °C
Mode: sleep
sms# 3
1234,S
COMMANDS TO CONTROL THE DEVICE

AutoFon D-Mayak
16
Single turning audio monitoring
mode
(password,A)
The device responds to the SMS with a call and turns the built-in
microphone on. Maximum session time is set in parameter № 5 in
SETUP=xxx, 3 attempts. After nishing, the device will stay online for 5
more minutes waiting for an SMS-command or a call.
It is also possible to use this function by setting the admin’s phone
number and calling the device during active mode.
Checking the status, settings and
operation modes
(password,?)
As a response to this command the
device sends an SMS-message with full
information about options except the
password.
With this command, the IMEI number and
current admin’s number can be found.
Changing the name of the device
(password,name=####)
This name will be written as a rst line
instead of default «AutoFon Mayak».
Maximum number of symbols is - 23.
Autofon D-Mayak v6.1d
04-03-2012 13:45:04
PASS: 1234
IMEI: 359231039333995
1: [phone]
SETUP=1025561721
011119111000000
I1=internet.mts.ru
I2=176.9.114.139.20102
I3=030
Т1: 05-03-2012 12:00,01D,F
T2: 12-03-2012 15:30,07D,G
Sensor=1/1 (move)
Ext. power: off
Output channel on.
Bat.: 6.16 V (82%) T: +34 °С
Mode: sleep
sms#11
1234,?
RING
1234,A
OpelAstra SE-6.1a
PASS: 5678
Bat.: 6.16 V (82%) Т: +34 °С
1234,name=OpelAstra
COMMANDS TO CONTROL THE DEVICE

AutoFon D-Mayak 17
Changing password
(password,p=####)
After receiving this command the device will
replace the password (4 digits) with the new
one (4 digits).
Example: 1234, p=5678, where 1234 – old password, 5678 – new
password. Do not forget your new password, reseting the password is
possible only by reinstalling rmware in service center!
Changing the admin’s number
(password,[phone])
When this command is received, the device
will replace the current phone number for
notications to a new one. The new number
must be entered in international format, starting with a «+» and consisting
of 10-13 digits.
AutoFon D-Mayak will also send SMS-message to old admin’s number to
inform about rewriting the number.
Recording, editing and deleting
phone number for emergency
notications.
(password,++79992223344),
(password,++0)
When this command is received, the device
will be sent double message to this number emergency SMS-message
such as turn, crash or sos-button pressing. The number must be in an
international format, starting with a «+» and consisting of 10-13 digits.
AutoFon D-Mayak v6.1a
PASS: 5678
Bat.: 6.16 V (82%) Т: +34 °С
1234,p=5678
AutoFon D-Mayak v6.1a
1: [phone]
Bat.: 6.16 V (82%) Т: +34 °С
1234,[phone]
AutoFon D-Mayak v6.1a
1: [phone]
2: [phone]
Bat.: 6.16 V (82%) Т: +34 °С
1234,++79991234567
COMMANDS TO CONTROL THE DEVICE

AutoFon D-Mayak
18
Balance and other USSD-requests
(password,M=xxxхххх)
Requesting account balance information.
Check with SIM card service provider by
using a balance command format. It is a
request like *100# or*102#
Example: 1234, М=*100#
During the next communication session the device will send request
to the operator, receive an answer and send it to admin. If the operator
adds commercial text to the balance message, this text will be
transmitted as well. If there is no response from the operator (after 3
attempts), the device sends an sMs error message.
We recommended to activate a service, in which admin allows to
receive a notication of the current sIM card balance when it is close
to zero. In addition, it will be useful to enable access to the mobile
operator online account before installing sIM card into the device.
Enable / disable the output channel (SE+ eddition only)
(password,k=xxxх) (password,k+) (password,k-)
Receiving SMS password,k=хххх х the
devices will turn output channel on at
set time, where xxxx - time in seconds,
from 0001 to 9999.
Also, you can turn the channel on for
unlimited time with command password,k+
To turn output channel o send an SMS-message: password,k-
AutoFon D-Mayak v.6.1a
Баланс 281.09 р.
sms#39
1234,M=*100#
AutoFon D-Mayak v.6.1a
Выходной канал включен.
Bat.: 5,85 В (100%) Т:+25 °C
1234,k=1200
COMMANDS TO CONTROL THE DEVICE

AutoFon D-Mayak 19
To change the device settings with one
command send the text message like:
1234,setup=01255**********4****2****
where 1234 - device password.
Number - parameter to be changed.
* (asterisk) – parameter not to be changed
has to be replaced by asterisk symbol. There
are 25 parameters.
1234,setup=***************9*********
Parameter 1 - interval / active mode:
(0 – default).
0– interval mode (sleep)
1– active mode (online).
Parameter 2 - russian / english SMS language:
(0 – default).
0– Russian,
1– English.
Parameter 3 - SMS waiting time (in minutes):
2to9(2 – default).
SMS waiting time after GSM-module registration
Parameter 4 - Delay before starting hibernation (in minutes):
2to9(5 – default).
SMS waiting time after all alarms and commands are done.
AutoFon D-Mayak v6.1a
SETUP=1005511132122
123212342231
Bat.: 6.16 V (82%) Т: +34 °С
1234,setup=1005511132122
123212342231
CHANGING GENERAL SETTINGS
AND CUSTOMISATION
(password,SETUP=parameter 1… parameter 25)
CHANGING GENERAL SETTINGS AND CUSTOMISATION

AutoFon D-Mayak
20
Parameter 5 - Audio control limit time (in minutes):
1 to5 (5 – default).
Maximal listening duration. After reaching the limit the device will
hang up
Parameter 6 - Maximal time to search satellites (in minutes):
1to9(6 – default).
Afterreaching thelimitthe device willsendapproximatecoordinates.
Parameter 7 - reserved
Parameter 8 - SMS type mode G:
1 to9 (0 – default).
Changing structure and type of information in SMS-message
mode G:
0– basic information + GPS-data in digital form in degrees + hy-
perlink to Yandex.Maps (default);
1– extended coordinate information version and the device’s
status, this type needs more symbols, increases amount of sms
send by the device, which can be extra charged by your mobile
provider.
2 – GPS data in digital form in degrees without hyperlinks.;
3 – Yandex-link coordinates + link to map.autofon.ru with
expanded information and location on GSM base stations
information in case satellites are not found;
4– Yandex-link + minimum device status information. SMS is
always in english and charged as one SMS. If no satellites were
found a link to map.autofon.ru will be sent, with LBS coordinates
and complete deciphered status information;
5– Google Maps-link + minimum information. SMS is always in
english and is charged as one SMS. Link to map.autofon.ru with
expanded information and location on GSM base stations in case
CHANGING GENERAL SETTINGS AND CUSTOMISATION