AutoJoe ATJ-ABD1 User manual

550W DRYER + INFLATOR
9-
PC ACCESSORY KIT • STORAGE BAG
Model ATJ-ABD1
EN
Form No. ATJ-ABD1-880E-M
If you have any questions or comments, please call the
Snow Joe®+ Sun Joe®customer service department at:
1-866-SNOWJOE (1-866-766-9563)
© 2021 by Snow Joe®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1

IMPORTANT!
Safety Instructions
All Operators Must Read
These Instructions Before
Use
When using an electrical device, basic
precautions should always be followed, including
the following:
mWARNING! To reduce the risk of re,
electric shock, or injury:
1. Do not leave the Dryer + Inator unattended
when it is plugged into an electrical outlet.
Turn o the Dryer + Inator, and unplug it
when not in use and before servicing.
2. Turn o all controls before unplugging.
3. Do not allow the device to be used as a toy.
Close attention is necessary when used by
or near children.
4. Use only as described in this manual. Use
only with the manufacturer’s recommended
attachments.
5. Do not use with damaged cord or plug. If
the device is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, return it to a service
center.
6. Do not pull or carry by the cord, use the
cord as a handle, close a door on the cord,
or pull the cord around sharp edges or
corners. Keep the cord away from heated
surfaces.
7. Do not unplug by pulling on the cord. To
unplug, grasp the plug, not the cord.
8. Do not touch the Dryer + Inator or its plug
with wet hands.
9. Do not put any objects into any openings.
Do not use with any opening blocked; keep
free of dust, lint, hair, and anything that may
reduce air ow.
10. Keep hair, loose clothing, ngers, and
all body parts away from openings and
moving parts.
11. Use extra care when cleaning on stairs.
12. Do not use the Dryer + Inator to clean or
dry ammable or combustible liquids, such
as gasoline, or use in areas where they may
be present.
13. This device is equipped with double
insulation. Servicing a double-insulated
device requires extreme care and should
be performed only by qualied service
personnel at an authorized Snow Joe®+
Sun Joe®dealer. Replacement parts must
be identical to the parts they replace. A
double-insulated device is marked with
the words “Double Insulation” or “Double
Insulated.” The symbol may also be
marked on the device.
mWARNING! To Reduce The Risk Of
Electric Shock – Do not use on wet surfaces. Do
not expose to rain. Store indoors.
2

1. Standard brush
2. Standard nozzle
3. Tapered nozzle
4. Air blade nozzle
Know Your Dryer + Inator
Read the owner’s manual and safety rules carefully before using your Dryer + Inflator. Compare the
illustration below to the actual unit in order to familiarize yourself with the location of the various
controls and attachments. Save this manual for future reference.
Technical Data
Power ............................... 120V AC | 60Hz | 4.5A
Motor ......................................................... 550 W
Speed Settings................................... High + Low
Air Power Max................................. 182 Air Watts
Air Flow Max. ...........................................66 CFM
Power Cord Length ............................ 10 ft. (3 m)
Net Weight .................................... 2.5 lbs (1.1 kg)
5. Detail brush
6. Straw adapter
7. Air pump adapter
(small/medium/large)
8. AC power plug
9. Dryer + Inator
10. ON/OFF switch
11. Storage Bag
8
1
2
34
5
6
7
10
11
9
3

Unpacking
Carton Contents
• Dryer + Inator
• Standard brush
• Standard nozzle
• Tapered nozzle
• Air blade nozzle
• Detail brush
• Straw adapter
• Air pump adapter
(large/medium/small)
• Storage Bag
• Manual and registration card
1. Carefully remove the Dryer + Inator and
check to see that all of the above items are
supplied.
2. Inspect the product carefully to make sure
no breakage or damage occurred during
shipping. If you nd damaged or missing
parts, DO NOT return the unit to the store.
Please call the Snow Joe®+ Sun Joe®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
NOTE: Do not discard the shipping carton
and packaging material until you are ready to
use your new Dryer + Inator. The packaging
is made of recyclable materials. Properly
dispose of these materials in accordance
with local regulations.
IMPORTANT! The equipment and packaging
material are not toys. Do not let children play
with plastic bags, foils, or small parts. These
items can be swallowed and pose a suocation
risk!
Nozzle Attachments
Included with your Dryer + Inflator are nine
nozzle attachments for cleaning different areas
and surfaces of your vehicle, as well as inating
various plastic or rubber inatables.
The tapered nozzle, standard nozzle, air blade
and all three air pump adapters can be fitted
directly onto the Dryer + Inflator (Fig. 1).
The standard brush can only be used on the
Dryer + Inflator via the standard nozzle (Fig. 2).
The detail brush can only be used on the Dryer
+ Inflator via the straw adapter, which in turn
can only be used via either the tapered nozzle
or the medium air pump adapter (Fig 3).
Operation
1. Plug the AC power plug into an electrical
outlet or an extension cord (Fig. 4).
Fig. 1
Tapered nozzle
Standard
nozzle
Air blade
nozzle
Air pump
adapters
(S/M/L)
Fig. 2
Standard
nozzle
Standard
brush
Fig. 3
Straw
Adapter
Detail
brush
Tapered nozzle
Air pump adapter (M)
4

2. Push the ON/OFF switch up for high air ow
or down for low air ow (Fig. 5).
3. Direct the Dryer + Inator onto the area you
wish to dry or clean (Fig. 6).
Alternatively, if inating plastic or rubber
inatables such as pool rings, beach balls,
air mattresses, rafts and more use the air
pump adapters (Fig. 7).
Electrical outlet
Fig. 4
AC power plug
High
Fig. 5
ON/OFF switch
Low
Fig. 6
mCAUTION! Never use the Dryer +
Inator without its sponge lter located in the
bottom of the unit.
4. Turn o and unplug when not in use (Fig. 5).
Storage + Maintenance
Store the Dryer + Inflator in the included
storage bag when not in use.
mWARNING! Store the Dryer + Inator
away from hot surfaces or under direct sunlight
to reduce the risk of a short circuit.
mCAUTION! Do not expose the Dryer +
Inator to rain or wet conditions. Water entering
the unit will damage it.
Service + Support
If your Auto Joe™ATJ-ABD1 Dryer + Inflator
requires service or maintenance, please call
Snow Joe®+ Sun Joe®customer service
at 1-866-SNOWJOE (1-866-766-9563) for
assistance.
Model + Serial Numbers
When contacting the company or arranging
service from an authorized dealer, you will need
to provide the model and serial numbers, which
can be found on the registration card. Copy
these numbers into the space provided below.
Fig. 7
Air pump
adapters
Record the following numbers from the housing or
registration card: Model #:
Serial #:
A T J - A B D 1
5
Table of contents
Other AutoJoe Power Tools manuals
Popular Power Tools manuals by other brands

MEISTER CRAFT
MEISTER CRAFT LASER MPS 800 EL Translation of the original operating instructions

Worx Nitro
Worx Nitro WX843L X Series instruction manual

Silvercrest
Silvercrest SEAS 20 A1 operating instructions

Central Pneumatic
Central Pneumatic 92849 Assembly and operating instructions

Toolshop
Toolshop 207-4825 Operator's manual

PROPOINT
PROPOINT 8844011 instructions