AV Life SS44RS User manual

Manual Matrix Scaller 12x4 Quad Processor
(SS44RS)
Versão 2016.05.17

1.Introduction!
The!matrix!switcher!is!a!high-performance!with!seamless!switching!output!and!mixed!input!4x4!matrix!
switcher,4! mixed! input! to! support! digital! video! signals! and! analog! video! signal,! and! 4! outputs! with!
seamless!switching!function,!seamless!switching!mode:!fast!switching,!fade!in/fade!out,!blinds!and!so!
on;! the! mixing! matrix! switcher! adopts! the! advanced! digital! technology,! with! scaller! function,! and!
achieve! a! variety! of! formats! to! achieve! a! unified! output! signal,! switching! seamlessly! perfect! visual!
effects.! At! the! same! time! it! with! infrared! matrix! function,! analog! video! signal! input! with! embedded!
audio!function.!Flexible!control!mode!diversity,!through!the!front!panel!button,!remote!control,RS-232!
and!TCP/IP!control.!
As! a! video! wall! processor,! the! matrix! switcher! is! able! to! zoom! in! one! input! image! four! times! to! the!
outputs.!And!as!a!Multi-viewer!processor,!the!matrix!switcher!can!mix!inputs!with!any!combos!to!one!
image,!and!then!transfer!to!all!the!outputs.!!
!
,
2.Features,
lCompliant!HDMI1.3,!HDCP1.3!and!DVI1.0!!
lInput!video!supports!HDMI,!VGA!and!C-video!
lSupports!input!resolutions!:!
HDMI:!480i!to!1080p!!!
VGA:1920!x!1080P@60Hz,!1360!x!768P@60Hz,!!
1280!x!1024P@60Hz,!1024!x!768P@60Hz,!
1280!x!720P@60Hz,1280!x!768P@60Hz,!800!x!600@60Hz,!
640!x!480P@60Hz!
CV:!Supports!PAL,!NTSC3.58,!NTSC4.43,!SECAM,!PAL/M,!PAL/N!standard!TV!formats!
lSupports!output!resolutions!:1920x1080P@60Hz!
lSupports!seamless!switching!output,optional!seamless!switching!mode:fast!switching,fade!in/fade!
out,blinds!and!so!on!
lThe!RS-232!for!the!firmware!update!
lSupports!RS-232,!remote!control,!on-panel!control!and!TCP/IP!Control!!
lSupports!smart!EDID!management!
lPicture!Adjustment!Settings!
lAutomatically!adjust!the!VGA!input!video!
lSupports!power-off!memory!
,
,
3.Package,Contents,
lHDMI,4!x4!mixed!inputs!seamless!matrix!switcher!! ! 1pcs!
l12V/2.5A!DC!power!adaptor!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1pcs!
lOperation!Manual!!!!!!!!!!!!!!!! ! ! ! ! !!!!!!!!!!!!!!!!1pcs!
lWideband!IR!Tx!cable!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!4pcs!
lWideband!IR!Rx!cable!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!5pcs!
lVideo!Processing!Mixed!Matrix!IR!Remote!!!!!!!!!!!!!!!!!!!!!!!!!!1pcs!
lMounting!ears!!!!!!!!!!!!!!!!!!! ! ! ! ! !!!!!!!!!!!!!!!!!!!!!!!!2pcs!
lRS232!cable!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!1pcs!
,

4.Specifications,
!
Input!Ports! 4×HDMI,!4xVGA,!4xRCA,!1×RS-232,!!
1xRJ-45(Control),!5×IR!INPUT,!4xAudio!!
Output!Ports!! ! ! ! 4×HDMI,!4xIR!OUTPUT!
Input!Resolutions!Support! Up!to!1920x1080P@60Hz!
Output!Resolutions!Support! Up!to!1920x1080P@60Hz!
Control! ! ! ! ! ! IR!,!RS-232!,!TCP/TP!,!Buttons!
ESD!Protection!!!!!!!! Human-body!Model:!!
±!8kV!(Air-gap!discharge)!
±!4kV!(Contact!discharge)!
Power!Supply!!!!!!!!12!V/2.5!A!DC!(US/EU!standards,!!
CE/FCC/UL!certified)!
Dimensions!!!!!!!!! 440mm!(W)×200mm!(D)×44.5mm!(H)!
Weight!!!!!!2380!g!
Chassis!Material!!!! Metal!
Silkscreen!Color!!!!!!! Black!
Operating!Temperature!! 0!ºC~40!ºC/32!ºF~104!ºF!
Storage!Temperature!!!! −20!ºC~60!ºC/−4!ºF~140!ºF!
Relative!Humidity!!!!! 20~90!%!RH!(non-condensing)!
Power!Consumption!!!!13.5!W(Max)/1.2W(Standby)!
!
!
5.,PANEL,FUNCTIONS,
,
5.1,Front,Panel,
!
!
Part!1.! LCM:! Displays!the!information!of!each!input!and!output!setting!and!EDID!management!.!
Part!2.! IR:!! IR!Receiver!window!(accepts!the!remote!control!signal!of!this!device!only).!
!POWER:!!Press!this!button!to!power!the!device!on/off.!The!LED!will!illuminate!green!when!the!
power!is!on,!red!when!it!is!in!'Standby'!mode.!
!LOCK:! Press!this!button!to!lock!all!the!buttons!on!the!panel,!press!again!to!unlock.!
Part!3.! OUTPUT/INPUT:! Press! the! OUTPUT! and! INPUT! button! to! select! the! output! corresponding!
input.!
For!example:!Press!OUPUT!ALL>INPUT 1,!The!OUTPUT!A,B,C,D!will!be!set!to!INPUT!1.!
Part!4.!!Picture,adjust:,Press!the!button!to!adjust!the!output!picture.!
For!example:Press!output!1>SCALER,!The!output!1!video!will!be!scaler!adjust.!
Note:,1.,Scaler,adjust,the,step:,six,steps.,
2.,The,AUTO,ADJUST,button,only,work,on,VGA,input.,
Part!5.!!Sources,input,select,and,mode,select:,,

1. Press!the!button!to!select!source!input.!!
For!example:!Press!input!1>VGA,The!input!1!will!be!select!the!VGA!video!input.!
2. Press!the!button!to!select!mode,!select!matrix,!multi-viewer!and!video!wall.!
For example:
a. Select!matrix!mode,!press!buttons!!
HDMI/M1!>!ENTER.!
b.Select!multi-viewer!mode,!press!buttons!
VGA/M2!>!ENTER,!and!press!buttons!A/B/C/D!select!different!mode!
c. Select!video!wall!mode,!press!buttons!
CV/M1!>!ENTER,!and!press!buttons!A/B/C/D!select!different!input.!
Part!6.!!EDID:,,Smart!EDID!management,!the!LCM!will!display!the!EDID!operation.!
Press! the! MENU! button! will! enter! the! EDID! management! window,! press! UP! or!
DOWN!button!to!select!the!needed!EDID!setting,!press!ENTER!button!to!select!the!
download!input!source.!It!can!easy!download!any!EDID!mode!to!any!input!source.!
!
Note:!The!EDID!mode!table!
EDID!Mode!
EDID!Description!
1!
1080i,!2CH!AUDIO!
2!
1080p,!2CH!AUDIO!
3!
DVI!1920X1080!
!
,
EDID.,What,is,it,and,what,is,it,used,for?,
Under! normal! circumstances,! a! source! device! (digital! and! analog)! will! require! information! about! a!
connected! device/display! to! assess! what! resolutions! and! features! are! available.! The! source! can! then!
cater! its! output! to! send! only! resolutions! and! features! that! are! compatible! with! the! attached!
device/display.!This!information!is!called!EDID!(Extended!Display!Information!Data)!!
and!a!source!device!can!only!accept!and!read!one!EDID!from!a!connected!device/display.!Likewise,!the!
source!an!only!output!one!resolution!for!use!by!a!connected!device/display.!
,
Why,is,EDID,so,important,with,the,HDMI,Matrix,?,
The! Matrix! is! complex! piece! of! technology! that! replicates! and! switches! between! multiple! inputs! and!
outputs.! Each! connected! source! device! will! require! one! EDID! to! read.! EDID! management! is! carefully!
handled!by!HDMI!Matrix!to!provide!a!single!EDID!for!each!source!to!read.!
,
What,options,do,I,have,to,manage,the,EDID,in,the,HDMI,Matrix,?,
First,!it!is!important!to!note!that!each!source!device!can!only!output!one!video/audio!signal!type.!This!
includes! resolutions! and! timings.! When! multiple! devices/displays! are! used,! such! as! with! the! HDMI!
Matrix,!it!is!important!to!use!devices/displays!that!have!similar!or!compatible!resolutions/features.!This!
will!ensure!that!the!single!video/audio! signal!produced!by! the!source!device!is!accepted!by!all!of!the!
connected!output!devices/displays.The!user!has!the!option,!through!the!EDID!management!window,!to!
choose!how!the!unit!will!manage!the!EDID!from!multiple!HDMI!devices/displays.!Therefore!the!user!has!
some!control! over! the! resolutions/features! that! the! source! devices! will! output.! The! HDMI! Matrix! for!
has! a! multiple! EDID! management! modes! that! will! control! how! the! EDID! information! from! multiple!
devices/displays!are!combined,!ignored,!and!routed.!
!
!
!
!
!
!

5.2,Rear,Panel,
,
,
Part1:,IR,Channel,
IR,EXT:,if!the!panel!sensor!is!obstructed!or!the!unit!is!installed!in!a!closed!area!out!of!infrared!line!
of!sight,!the!IR!RX!receiver!included!can!be!inserted!into!the!IR!EXT!port!at!the!rear!to!extend!the!
IR!sensor!range!and!enable!local!control!of!the!matrix.!
IR, IN/OUT:!Super! IR! control! system! interface.! for! further! details,! please! refer! to! the! Super! IR!
system!control!introduction.!
Part2:,VGA,CV,AND,AUDIO,INPUT,
Connect!to!the!VGA!or!CV!input!source!devices!such!as!a!DVD!player,!a!Set-top!Box!or!PC!with!
VGA!cable!or!RCA!coaxial cable.Each!VGA!or!CV!input!is!accompanied!with!a!3.5mm!stereo!audio!
input.,
Part,3:,PC,CONTROL,
TCP/IP:!This!port!is!the!link!for!TCP/IP!controls,!connect!to!an!active!Ethernet!link!with!an!RJ45!
terminated!cable.,
RS232:,Connect!to!a!PC!or!control!system!with!D-Sub!9-pin!cable!for!the!transmission!of!RS-232!
commands.!
Part4:,OUTPUT,
The!HDMI!OUTPUT!connect!to!HDMI!equipped!TVs.!
Part5:,HDMI,INPUT,
Connect! to! the! HDMI! input! source! devices! such! as! a! DVD! player! or! a! Set-top! Box! with! HDMI!
cable.!
Part6:,DC,POWER,INPUT,
Plug!the!12V/2.5A!DC!power!supply!into!the!DC12V!power!in.!
!
!
6.,Remote,Control,
(1). Press!this!button!to!power!on!the!matrix!or!set!it!to!standby!mode.!
(2).RESET!Button:!Press!this!button!reset!to!the!factory!settings,
(3).Output!selection!and!Picture!adjust!a.!Letters!correspond!with!the!outputs!
on!the!matrix.!
b.!Press!the!button!to!adjust!the!output!picture.!For!example:!Press!output!
1>SCALER,!the!output!1!video!will!be!scaler!adjust.!
Note:,The,AUTO,ADJUST,button,only,work,on,VGA,input.!
(4).Input!selection!and!Sources!input!selection:!
a.!Numbers!correspond!with!the!inputs!on!the!matrix.!
b.! Press! the! button! to! select! source! input.! For! example:! Press! input! 1>VGA,!
The!input!1!will!be!select!the!VGA!video!input.!
(5).Mode! selection:! Select! switch! mode;! matrix,! multi-viewer! and! video! wall,!
and!in!multi-viewer!mode,!press!buttons!IN/M1,!IN/M2,!IN/M3,!IN/M4!select!

different!mode;!and!in!video!wall!mode,!press! buttons! IN/M1,! IN/M2,! IN/M3,! IN/M4! select! different!
input.!
(6).Picture!adjust:!In!video!wall!mode, users can set the bezel size of the adjacent images in zoom-in
model, to make the whole image looks coherently,
,
,
7.,IR,Control,system!!
!
!
At!Matrix!end:!Insert!the!3.5mm!jacks!of!the!IR!TX!Emitters!included!with!the!unit!into!the!IR!TX!Emitter!
ports!at!the!rear!of!the!matrix!according!to!input.!The!IR!signal!is!added!to!the!HDMI!of!the!input!device!
so,!for!example,!if!the!user!is!watching!Blu-ray!on!input!1,!the!IR!signal!will!be!directed!through!the!IR!
TX1!socket!to!control!the!device.!!
As!each!IR!TX!port!is!allocated!to!an!individual!HDMI!input!port,!if!the!user!is!unable!to!establish!IR!
control!of!the!device,!care!should!be!taken!to!check!firstly,!that!the!IR!emitter!and!HDMI!input!ports!
match!(Input!1-TX1,!Input2-TX2!etc.)!with!plugs!secured!in!correct!ports,!and!secondly,!that!the!IR!TX!
emitter!sensors!are!firmly!attached!directly!to!the!front!of!inputs!and!covering!infrared!sensor!windows!
of!the!source!devices.Some!later!adjustment!may!be!needed!to!the!location!of!the!sensor!to!achieve!
the!best!performance!results!-!sometimes!moving!the!sensor!to!different!areas!on!the!source!can!
improve!IR!performance.!
NOTE:!Infrared!receiving!areas!of!devices!can!be!located!by!shining!a!flashlight!onto!the!front!of!the!
device!–!the!sensor!should!be!able!to!be!seen!through!the!plastic!as!a!small,!round!object!inside.Insert!
3.5mm!jacks!of!IR!RX!receivers!into!RX!ports,!making!sure!the!receivers!themselves!are!placed!in!clear!
view!to!receive!an!infrared!signal!from!the!remote!handset!used!to!control!the!display!outputs.!
!
!
,

9.,PC,controller,user,guide!
,
Installation,
Matrix!controller!is!a!green!software.!Just!copy!MatrixController.exe!to!PC!which!is!used!to!control!the!
Matrix!by!RS232!COM!port!or!TCP/IP!to!complete!installation.!
Preparation,
nConnect!PC!and!Matrix!by!RS232!cable!(headers!of!both!sides!of!cable!should!be!FEMALE)!or!
TCP/IP(local!area!network)!
nPower-up!Matrix!
nDouble!click!MatirxController.exe!icon!to!run!it!
How to control Matrix:
u“General”,page ,
1. Select!RS232!COM!or!TCP!mode,
2. Select!RS232!COM!port,
3. Click!to!connect!or!disconnect!PC!and!Matrix,
4. Select!Matrix!IP,
5. Connect!to!Matrix!IP,
6. Search!Matrix!IP,
7. Configure!Matrix!IP!and!MAC,
8. Click!to!reset!to!the!factory!settings,
9. Click!to!button!system!into!the!matrix!mode!
10. Click! to! button! system! into! the! Multi-viewer!mode;! for! details,! please! refer! to! the! Multi-viewer!
mode.,
11. Click!to!button!system!into!the!video!wall!mode;!for!details,!please!refer!to!the!video!wall!mode.,
12. Click!to!button!select!one!input!image!zoom!in!four!times!to!the!outputs.!,
13. Enable!or!disable!Beep,
14. IN!Multi-viewer,!you!can!add!border,
!
!
,

ØConfigure!TCP!!
After!action!of!7!,!edit!form!will!pop-up!as!below:!
!
1. Select!auto!or!static!IP!
2. Rewrite!the!Matrix!IP!
3. Rewrite!the!Matrix!MAC!
!
!
lThe,Multi-viewer,mode,
The!Multi-viewer!mode has!a!variety!of!display!modes.!All!the!display!modes!as!below:!
Detailed!operations:!While!the!PC!software!is!running!normally,!click!on!the!button ,!via!the!
mode!of the!drop-down!box !,!choose!1/2/3/4!mode,!and!via!the!audio!of!the!drop-down!
box! ,!choose!1/2/3/4!input!audio,!as!the!same!time!via!the!main!of!the!drop-down!box!
,!choose!1/2/3/4!input!one!as!the!main!picture,!and!via!the!Border!
box !can!add!show!border!or!not!show!border.!
!
!
!
!
!
!

Picture,outside,Picture,(POP),Displaying,
Mode!1: !
!
Mode!2:!
!
Mode!3:!
!
Picture,in,Picture,(PIP),Displaying!
Mode!4:!
!
!
!
!

lThe,video,wall,mode,
Detailed!operations:!While!the!PC!software!is!running!normally,!click!on!the!button .!
In this area, users can set the bezel size of the adjacent images in zoom-in model, to make the whole
image looks coherently. As shown in: .
Figure!1!and!Figure!2!will!show!you!the!difference!between!the!original!image!and!the!image!adjusted.!
!
!!!!!Figure!1!The!Original!Image!!
!
Figure!2!The!Image!Adjusted!
Diagram of Video Wall Displaying
4x!Zoom-in:!It!means!matrix!switcher!is!able!to!zoom!in!the!input!image!and!spilt!to!4!parts,!and!then!
full-screen!display!on!the!output!displayers!one!to!one.!!
!
!
!
!

!
!
“EDID control” page !
1. Select!the!needed!EDID!to!input!port!and!click!set!button!the!EDID!will!write!to!the!selected!HDMI!
input!ports.!
!
u,“Matrix”,page!
!
!
1. LED!which!display!Input!number!for!respective!Output!
2. Click!to!select!Input!port!for!respective!Output!port!
3. Click!to!select!previous!or!next!Input!port!for!respective!Output!port!
4. Click!to!select!the!seamless!switching!output!mode!
5. Click!to!select!the!seamless!switching!time!
6. Click!to!automatically!adjust!the!output!picture!
7. Click!to!scaler!the!output!picture!
8. Click!to!select!the!input!signal!source!
Note:,The,signal,source,for,the,VGA,input,6,can,use.,
,
,

u!“FW,upgrade”,page!
!
!
1. Click!to!open!FW!file(file!extension!is!“.fw”)!
2. Display!the!FW!file!path!
3. Displaying!the!progress!of!the!software!upgrade!
4. Click!to!upgrade!the!Matrix!software!
5. Display!the!message!of!the!software!upgrade!
6. Clear!the!message!of!the!software!upgrade!
Note:,The,matrix,after,software,upgrade,required,again,to,power,supply.,
,
,
10.,Connection,and,Installation,
!
1. Connect!up!to!4!sources!such! as!a! Blu-Ray!Player,!game!console,!A/V!Receiver,!Cable!or!Satellite!
Receiver,!etc.!to!the!HDMI!,VGA!or!CV!inputs!on!the!unit.!Insert!and!extract!cables!carefully!with!
the!power!switch!off.!Connecting!and!disconnecting!while!the!unit!is!powered!can!result!in!damage!
to!circuitry.!
2. Connect!up!to!four!HD!displays!using!the!output!ports(A-D)!on!the!matrix.!
3. OPTIONAL:Connect!the!IR!receiving!extender!to!the!IR!EXT!port!on!the!matrix.!
4. OPTIONAL:Connect!an!Ethernet!cable!from!the!TCP/IP!port!on!the!matrix!to!a!local!Area!Network.!
5. OPTIONAL:Connect!an!RS-232!cable!from!the!RS232!port!on!the!matrix.!
6. OPTIONAL:Connect!the!IR!receiving!extender!to!the!IR!INPUT!port!and!the!IR!emission!extender!to!
the!IR!output!port!on!the!matrix.!
7. Connect!the!DC!12V!Locking!power!supply!to!the!power!receptacle!on!the!matrix.!
8. Connect!the!power!supply!to!an!available!electrical!outlet.!

11.Atenção:,,
.!Não!expor!o!equipamento!a!situações!de!calor!excessivo!(não!apoiar!ele!sobre!superfícies!quentes).!
.!Deixar!o!equipamento!ventilado.!
.!Desplugar!da!tomada!o!equipamento!em!situações!de!raios!ou!queda!de!energia!constante.!
.!Tome!cuidado!ao!conectar!os!cabos!HDMI,!verifique!a!posição!do!conector!e!plugue!o!cabo!devagar.!
.!Mantenha!as!embalagens!e!manuais!para!efeito!de!garantia!e!futuras!consultas!(pelo!menos!durante!o!tempo!da!garantia!–!6!meses).!
.!Qualquer!dúvida!ou!problema,!entre!em!contato!com!a!Suporte!([email protected])!ou!através!do!telefone!11.4783-4186!
12.Dicas,/,Resolução,de,Problemas:,
-!Sempre!verifique!se!a!luz!do!Power!(energia)!esta!acesa.!Se!estiver!muito!fraca!ou!piscando,!troque!a!fonte!de!alimentação!por!outra!
compatível..!
-!Algumas!instalações!possuem!tomadas!AC!com!fase!diferente!e!sem!um!bom!aterramento,!configurando!uma!situação!de!risco!para!os!
equipamentos!ligados!ao!sistema,!devido!ao!loop!de!terra.!
Nesse!caso,!por!exemplo,!as!fontes!de!sinal!HDMI!(...)!estão!ligados!a!tomada!AC-1,!e!o!display!(...)!a!tomada!AC-2,!se!a!voltagem!entre!
elas!não! for!igual! a!0,! quando!os!cabos!HDMI!(que!carregam!5!V! DC)!são!conectados! ao!sistema,!pode!acontecer!a!falha!no!sinal! ou!a!
queima!dos!equipamentos,!cujos!danos!não!são!cobertos!pela!garantia.!
Antes! de! conectar! os! equipamentos! e’! necessário,! portanto,! verificar! a! voltagens! das! varias! tomadas! utilizadas! (use! um! multímetro! e!
verifique!se! estão!todas! com!voltagem!igual!a!0!entre!elas),!sobretudo,!certifique-se,!com!o!responsável!pela! instalação!elétrica,!que!o!
aterramento!seja!eficiente.!
LOOP!DE!TERRA:!
.! Os! equipamentos! fontes! de! sinal! (DVD,! Receiver,! Blu! Ray,! Video! Game,! Media! Center,! Decoder,! Splitter,! Switcher,! Matriz,! Tx! e! etc)!
podem!estar!ligados!em!uma!tomada!de!energia!que!esta!em!um!circuito!ou!fase!diferente!da!tomada!de!energia!da!onde!esta!ligado!o!
display!(Rx,!TV!ou!projetor).!Isso!poderá!provocar!uma!voltagem!entre!as!2!tomadas!diferentes!de!0!(potencial!de!terra),!o!que!poderia!
levar! a! problemas! (LOOP! DE! TERRA).! Nesse! caso! quando! voce! conecta! os! cabos! HDMI! (que! carregam! 5V! em! sua! construção),! esse!
potencia!de!terra!pode!interferir!e!interromper!o!sinal!ou!ate!mesmo!queimar!o!equipamento.!
13. ,,,,Garantia,/,Certificado:,
Os! produtos! do! Grupo! DISCABOS! (AVLIFE)! seguem! as! normas! nacionais! para! o! regime! de! garantia! e! assistência.! O!
Grupo!se!reserva!o!direito!de!escolher!a!melhor!politica!obedecendo!a!legislação!vigente.!
!
.!LEIA!SEMPRE!O!MANUAL!ANTES!DE!UTILIZAR!O!PRODUTO.!
!
.!Os!produtos!AVLIFE! tem! garantia! de! 6!meses,! a!partir!da!data!de!compra!(NF!de!venda!do!Grupo! Discabos!para!o!
cliente!comprador),!!
.!A!garantia!cobre!apenas!defeitos!de!fabricação;!os!danos!causados!por!quedas,!acidentes,!negligencia,!mau!uso!ou!
anomalias! na! rede! elétrica,! não! estão! inclusos! na! garantia! do! produto! e! deverão! entrar! como! assistência! técnica,!
sujeito!a!custo.!
.!Para!utilizar!a!garantia,!o!cliente,!por!sua!conta,!deve!enviar!os!produtos!para:!!
DISCABOS(COM.(IMP.(EXP.(ACESS.(ELETROELETRON.(.LTDA.,((
Av.(Ibirama,(1064,(Pq.(Industrial(Daci(–(Taboão(da(Serra(/(SP,(CEP(06785-300(,(A/C(Suporte((
.!Todos!os!acessórios!originais,!juntamente!com!sua!embalagem,!devem!ser!remetidos!para!SUPORTE/MANUTENCAO.!
A!falta!deles!pode!gerar!custos!que!serão!definidos!pelo!Grupo!Discabos.!
.! Uma! copia! da! Nota! Fiscal! de! compra,! com! local! e! data;! ! um! relatório! do! defeito! apresentado! e! circunstancias! da!
instalação!;!e!uma!NF!de!conserto!constando!os!dados!completos!do!Cliente,!devem!ser!enviada!junto!ao!produto.!
A!falta!de!qualquer!desses!itens!pode!acarretar!em!não!aceitação!pela!fabrica!do!produto,!o!que!cancelaria!a!garantia.!
A!fabrica!se!compromete,!em!no!máximo!30!dias!úteis,!testar!e!avaliar!a!garantia!ou!posterior!manutenção!do!produto!
(o!que!poderá!ter!custo!fixado!pela!empresa!de!manutenção)!caso!esse!não!cumpra!as!especificações!acima!ou!esteja!
fora!do!prazo!de!validade.!
!
A!DISCABOS!–!AVLIFE!reserva-se!o!direito!de!avaliar!e!julgar!a!causa!do!defeito!apresentado!pelo!produto.!!!!!!!
!
!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
DISCABOS!COM.!IMP.!EXP.!ACESS.!ELETR.!LTDA.!–!CNPJ.!00.898.953/0001-19!
Av.!Ibirama,!1064!–!Pq.!Ind.!Daci!–!CEP!06785-300!-!Taboão!da!Serra!/!SP!–!BRASIL!
Fone/Fax:!11!-!4783-3595!/!4783-4186!/!4137-3283!/!4139-5261!-!E-mail:![e-mail]!