Kramer VS-66H User manual

Kramer Electronics, Ltd.
Preliminary
USER MANUAL
Model:
VS-66H
6x6 HDMI Matrix Switcher

Contents
i
Contents
1Introduction 1
2Getting Started 1
2.1 Quick Start 2
3Overview 3
3.1 Defining EDID 3
3.2 About HDMI 4
3.3 About HDCP 5
3.4 Recommendations for Best Performance 5
4Your VS-66H 6x6 HDMI Matrix Switcher 5
4.1 Using the IR Transmitter 8
5Installing the VS-66H on a Rack 9
6Connecting a VS-66H 6x6 HDMI Matrix Switcher 10
7Operating the VS-66H 6x6 HDMI Matrix Switcher 12
7.1 Switching an Input to an Output 12
7.2 Acquiring the EDID 12
7.2.1 Acquire an EDID from a Connected Output 12
7.2.2 Acquire an EDID from Several Sets of Inputs and Outputs 13
7.2.3 Acquire an EDID from Several Connected Outputs (Auto) 14
7.2.4 Acquire the Default EDID 14
7.3 Storing and Recalling a Setting 14
7.4 Connecting to the VS-66H via RS-232 15
7.5 Controlling via ETHERNET 15
7.5.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable) 15
7.5.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable) 17
8Technical Specifications 17
9Communication Parameters 17
10 Kramer Protocol 2000 18
Figures
Figure 1: VS-66H 6x6 HDMI Matrix Switcher 6
Figure 2: Connecting a VS-66H 6x6 HDMI Matrix Switcher 11
Figure 3: Local Area Connection Properties Window 16
Figure 4: Internet Protocol (TCP/IP) Properties Window 16
Tables
Table 1: VS-66H 6x6 HDMI Matrix Switcher Features 7
Table 2: Technical Specifications of the VS-66H 17
Table 3: Communication Parameters 17
Table 4: Protocol Definitions 18
Table 5: Instruction Codes for Protocol 2000 19

Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast
range of problems that confront the video, audio, presentation, and
broadcasting professional on a daily basis. In recent years, we have
redesigned and upgraded most of our line, making the best even better! Our
1,000-plus different models now appear in 11 groups1
Thank you for purchasing your Kramer VS-66H 6x6 HDMI Matrix Switcher.
that are clearly
defined by function.
Note, that the Kramer VS-66H is identical to the VS-66HDMI; just the
name has changed replacing the suffix “HDMI” by “H” (according to
the HDMI Guideline).
The VS-66H is ideal for conference room presentations and advertising
applications, as well as for rental and staging. Each package includes the
following items:
•VS-66H 6x6 HDMI Matrix Switcher
•Power cord and rack “ears”
•Windows®-based Kramer control software2
•Windows®-based Ethernet Configuration Manager and Virtual Serial
Port Manager
•Kramer RC-IR3Infrared Remote Control Transmitter (including the
required batteries and a separate user manual3)
•This user manual3
2 Getting Started
We recommend that you:
•Unpack the equipment carefully and save the original box and
packaging materials for possible future shipment
•Review the contents of this user manual
•Use Kramer high performance high resolution cables4
1 GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Matrix Switchers; GROUP 3: Control Systems;
GROUP 4: Format/Standards Converters; GROUP 5: Range Extenders and Repeaters; GROUP 6: Specialty AV Products;
GROUP 7: Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9: Room Connectivity;
GROUP 10: Accessories and Rack Adapters; GROUP 11: Sierra Products
2 Downloadable from our Web site at http://www.kramerelectronics.com
3 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com
4 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com

Getting Started
KRAMER: SIMPLE CREATIVE TECHNOLOGY
2
2.1 Quick Start
This quick start chart summarizes the basic setup and operation steps.

Overview
3
3 Overview
The VS-66H is a high quality 6x6 matrix switcher for HDMI signals.
In particular, the VS-66H features:
•Support for up to 1.65Gbps bandwidth per graphic channel1
•HDCP support (High Definition Digital Content Protection)
•I-EDIDPro™ Kramer Intelligent EDID Processing™, an intelligent
EDID handling and processing algorithm that ensures Plug and Play
operation for HDMI systems
•An OFF button to disconnect an output
•A PANEL LOCK button to prevent unwanted tampering with the
buttons on the front panel
•12 preset memory locations for quick access to common configurations
•Installation into one vertical space of a standard 19” professional rack
enclosure
Control the VS-66H using the front panel buttons, or remotely via:
•RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller
•The Kramer Infrared remote control transmitter
•The ETHERNET
•An external remote IR receiver (optional), see section 4.1
3.1 Defining EDID
The Extended Display Identification Data (EDID2
7.1
) is a data-structure,
provided by a display, to describe its capabilities to an HDMI source. The
EDID enables the VS-66H to “know” what kind of monitor is connected to
the output. The EDID includes the manufacturer’s name, the product type,
the timing data supported by the display, the display size, luminance data
and (for digital displays only) the pixel mapping data. See section for
details of how to acquire the EDID.
1 Suitable for resolutions up to UXGA at 60Hz, and for all HD resolutions
2 Defined by a standard published by the Video Electronics Standards Association (VESA)

Overview
KRAMER: SIMPLE CREATIVE TECHNOLOGY
4
3.2 About HDMI
High-Definition Multimedia Interface (HDMI) is an uncompressed all digital1
In particular, HDMI:
audio/video interface, widely supported in the entertainment and home cinema
industry. It delivers the highest high-definition image and sound quality. Note
that Kramer Electronics Limited is an HDMI Adopter and an HDCP Licensee.
•Provides a simple2interface between any audio/video source, such as a
set-top box, DVD player, or A/V receiver and video monitor, such as a
digital flat LCD / plasma television (DTV), over a single lengthy3
•Supports standard, enhanced, high-definition video, and multi-channel
digital audio
cable
4
•Transmits all ATSC HDTV standards and supports 8-channel digital
audio, with bandwidth to spare to accommodate future enhancements
and requirements
on a single cable
•Benefits consumers by providing superior, uncompressed digital video
quality via a single cable5
•Is backward-compatible with DVI (Digital Visual Interface)
, and user-friendly connector
•Supports two-way communication between the video source (such as a
DVD player) and the digital television, enabling new functionality such
as automatic configuration and one-button play
HDMI has the capacity to support existing high-definition video formats
(720p, 1080i, and 1080p/60), as well as standard definition formats such as
NTSC or PAL.
1 Ensuring an all-digital rendering of video without the losses associated with analog interfaces and their unnecessary digital-
to-analog conversions
2 With video and multi-channel audio combined into a single cable, the cost, complexity, and confusion of multiple cables
currently used in A/V systems is reduced
3 HDMI technology has been designed to use standard copper cable construction at up to 15m
4 HDMI supports multiple audio formats, from standard stereo to multi-channel surround-sound. HDMI has the capacity to
support Dolby 5.1 audio and high-resolution audio formats
5 HDMI provides the quality and functionality of a digital interface while also supporting uncompressed video formats in a
simple, cost-effective manner

Your VS-66H 6x6 HDMI Matrix Switcher
5
3.3 About HDCP
The High-Bandwidth Digital Content Protection (HDCP) standard
(developed by Intel), protects digital video and audio signals transmitted
over DVI or DVI connections between two HDCP-enabled devices to
eliminate the reproduction of copyrighted material. To protect copyright
holders (such as movie studios) from having their programs copied and shared,
the HDCP standard provides for the secure and encrypted transmission of
digital signals.
3.4 Recommendations for Best Performance
To achieve the best performance:
•Use only good quality connection cables1
•Avoid interference from neighboring electrical appliances that may
adversely influence signal quality and position your Kramer VS-66H
away from moisture, excessive sunlight and dust
to avoid interference,
deterioration in signal quality due to poor matching, and elevated noise
levels (often associated with low quality cables).
4 Your VS-66H 6x6 HDMI Matrix Switcher
Figure 1 and Table 1 define the VS-66H.
1 Available from Kramer Electronics on our Web site at http://www.kramerelectronics.com

Your VS-66H 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
6
Figure 1: VS-66H 6x6 HDMI Matrix Switcher

Your VS-66H 6x6 HDMI Matrix Switcher
7
Table 1: VS-66H 6x6 HDMI Matrix Switcher Features
#
Feature
Function
1 IR Receiver The red LED lights when receiving signals from the Infrared remote
control transmitter
2 POWER Switch Illuminated switch for turning the unit ON or OFF
3 ALL Button Pressing ALL before pressing an input button, connects that input to
all outputs1
4 OFF Button Pressing OFF after pressing an output button disconnects that output
from the inputs. To disconnect all the outputs,
press the ALL button and
then the OFF button
5 SELECT
Buttons2
OUT Select the output to which the input is switched (from 1 to 6). The
selected button illuminates if an acceptor is connected
6 IN Select the input to switch to the output (from 1 to 6). The selected
button illuminates if a source is connected
7 STO Button Press to store an input setting (see section 7.3)
8 RCL Button Press to recall an input setting (see section 7.3)
9 LOCK Button Press to toggle disengaging the front panel buttons and to acquire
the EDID (see section 7.1)
10 EDID Button
3
Press to acquire the EDID (see section 7.1)
11 OUTPUT/ INPUT
LCD Display
Displays the selected input switched to the output (marked above
each input)
12 INPUT HDMI Connectors Connect to the HDMI sources (from 1 to 6)
13 OUTPUT HDMI Connectors Connect to the HDMI acceptors (from 1 to 6)
14 RS-232 9-pin D-sub Port Connects to the PC or other RS-232 Remote Controller
15 ETHERNET Connector Connects to the PC or other Ethernet Controller
16 RESET Button Press the ETHERNET factory reset button
to reset to the factory default
definitions 4
IP number −192.168.1.39
:
Mask – 255.255.255.0
Gateway – 192.168.1.1
17 REMOTE IR Opening
5
Connects to an external IR receiver unit
6
18
for controlling the machine via an
IR remote controller (instead of using the front panel IR receiver)
Power Connector with Fuse AC connector enabling power supply to the unit
1 For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
2 Are also used for storing machine setups (see section 7.3)
3 Illuminates when configuring the EDID
4 First turn the VS-66H OFF and then turn it ON again while pressing the RESET button. The unit will power up and load its
memory with the factory default definitions
5 Covered by a cap. The 3.5mm connector at the end of the internal IR connection cable fits through this opening
6 Optional. Can be used instead of the front panel (built-in) IR receiver to remotely control the machine (only if the internal
IR connection cable has been installed)

Your VS-66H 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
8
4.1 Using the IR Transmitter
You can use the RC-IR3IR transmitter to control the machine via the
built-in IR receiver on the front panel or, instead, via an optional external IR
receiver1. The external IR receiver can be located up to 15 meters away
from the machine. This distance can be extended to up to 60 meters when
used with three extension cables2
Before using the external IR receiver, be sure to arrange for your Kramer
dealer to insert the internal IR connection cable20F
3with the 3.5mm connector
that fits into the REMOTE IR opening on the rear panel. Connect the
external IR receiver to the REMOTE IR 3.5mm connector.
1 Model: C-A35M/IRR-50
2 Model: C-A35M/A35F-50
3 P/N: 505-70434010-S

Installing the VS-66H on a Rack
9
5 Installing the VS-66H on a Rack
.
This section provides instructions for rack mounting the unit.

Connecting a VS-66H 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
10
6 Connecting a VS-66H 6x6 HDMI Matrix Switcher
To connect the VS-66H 6x6 HDMI Matrix Switcher, as illustrated in the
example in Figure 2, do the following1
1. Connect
:
2
2. Connect
up to six HDMI sources (for example, DVD players) to the six
INPUT HDMI connectors.
3
3. If required, connect a PC and/or controller to the RS-232 port (see section
the six OUTPUT HDMI connectors to up to six HDMI acceptors
(for example, LCD displays with built-in speakers).
7.4) and/or the ETHERNET port (see section 7.5).
4. Connect the power connector to the mains electricity (not shown in Figure
2).
5. If required, acquire the EDID (see section 7.1)
Press the SELECT IN and OUT buttons to choose which HDMI input to
route to a selected output.
1 Switch OFF the power on each device before connecting it to your VS-66H. After connecting your VS-66H, switch on its
power and then switch on the power on each device
2 You do not have to connect all the HDMI sources
3 You do not have to connect all the outputs

Connecting a VS-66H 6x6 HDMI Matrix Switcher
11
Figure 2: Connecting a VS-66H 6x6 HDMI Matrix Switcher

Operating the VS-66H 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
12
7 Operating the VS-66H 6x6 HDMI Matrix Switcher
This section describes how to:
•Route an input to an output (see section 7.1)
•Acquire the EDID (see section 7.2)
•Store and recall a setting (see section 7.3)
•Control the machine via RS-232 (see section 7.4)
•Control the machine via the ETHERNET port (see section 7.5)
7.1 Switching an Input to an Output
To route an input to an output, press an output key, followed by an input
key to route this input to that output.
7.2 Acquiring the EDID
You can acquire the EDID:
•From one output to any of the six inputs (see section 7.2.1)
•From several sets of inputs and outputs (see section 7.2.2)
•From several connected outputs to any of the inputs (see section 7.2.3)
•From the default EDID (see section 7.2.4)
7.2.1 Acquire an EDID from a Connected Output
To acquire or change the EDID of a new output display:
1. Turn the VS-66H ON.
2. Connect the required acceptor to the output from which you want to acquire
the EDID.
3. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
4. Press the input button to which the EDID will be copied.
The selected input number flashes on the display.
5. Select the output from which the EDID will be acquired.
6. Press the EDID button.
The process is complete when the display returns to normal.

Operating the VS-66H 6x6 HDMI Matrix Switcher
13
7.2.2 Acquire an EDID from Several Sets of Inputs and Outputs
To acquire the EDID for more than one output (for example, OUT 1 to IN 1
and OUT 6 to IN 3), do the following:
1. Turn the VS-66H ON.
2. Connect the required acceptor to the output from which you want to acquire
the EDID.
3. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
4. Press the input button to which the EDID will be copied (for example,
IN 1).
The selected input number flashes on the display.
5. Select the output from which the EDID will be acquired (for example,
OUT 1).
6. Press the IN 1 button.
The IN 1 button ceases to flash.
7. Press the next input button to which the EDID will be copied (for example,
IN 3).
The selected input number flashes on the display.
8. Select the output from which the EDID will be acquired (for example,
OUT 6).
9. Press the IN 3 button.
The IN 3 button ceases to flash.
10. Press the input buttons to which you want to copy the EDID (for example,
IN 1 and IN 3).
11. Make sure that the relevant input numbers flash on the display.
12. Press the EDID button.
The process is complete when the display returns to normal.

Operating the VS-66H 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
14
7.2.3 Acquire an EDID from Several Connected Outputs (Auto)
To acquire or change the EDID of several output displays1
1. Turn the VS-66H ON.
:
2. Connect the required acceptors to the outputs from which you want to
acquire the EDID.
3. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
4. Press the input button to which the EDID will be copied.
The selected input number flashes on the display.
5. Press the OFF button until the numeric – (hyphen) appears on the display.
6. Press the EDID button.
The process is complete when the display returns to normal.
7.2.4 Acquire the Default EDID
To reset to the default EDID, do the following:
1. Turn the VS-66H ON.
2. Press the EDID and STO buttons simultaneously and hold them for 3
seconds.
Both buttons flash.
3. Press the input button to which the EDID will be copied.
The selected input number flashes on the display.
4. Press the OFF button until a "0" (zero) appears on the display.
5. Press the EDID button.
The process is complete when the display returns to normal.
7.3 Storing and Recalling a Setting
You can use the STO and RCL buttons to store up to 12 setups and then
recall them.
To store a setting:
1. Set the machine to the desired setting.
For example, press the OUT 3 button and IN 4 button2
1 The EDID acquired is a weighted average of all the connected outputs. For example, if several displays with different
resolutions are connected to the outputs, the acquired EDID supports all the resolutions, as well as other parameters included
in the EDID
.
2 You can set all the switcher IN-OUT buttons

Operating the VS-66H 6x6 HDMI Matrix Switcher
15
2. Press the STO button.
The STO button flashes.
3. Select an OUT or IN SELECT button to store the machine setting (for
example, OUT 5).
4. Press the LOCK button1
To recall a setup:
to store the current setup.
In this example, the OUT 5 button stores the setting.
1. Press the RCL button.
The RCL button flashes.
2. Press the relevant OUT or IN button that stored the setting.
In this example, press OUT 5.
3. Press the LOCK button to recall the stored setting.
7.4 Connecting to the VS-66H via RS-232
You can connect to the VS-66H via an RS-232 connection using, for
example, a PC. Note that a null-modem adapter/connection is not required.
To connect to the VS-66H via RS-232:
•Connect the RS-232 9-pin D-sub rear panel port on the VS-66H unit via
a 9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin
5 need to be connected) to the RS-232 9-pin D-sub port on your PC
7.5 Controlling via ETHERNET
You can connect the VS-66H via the Ethernet, using a crossover cable (see
section 7.5.1) for direct connection to the PC or a straight through cable (see
section 7.5.2) for connection via a network hub or network router2
7.5.1 Connecting the ETHERNET Port directly to a PC (Crossover Cable)
.
You can connect the Ethernet port of the VS-66H to the Ethernet port on
your PC, via a crossover cable with RJ-45 connectors.
This type of connection is recommended for identification of the factory default
IP Address of the VS-66H during the initial configuration
1 You have to press the LOCK button within 10 seconds, before the store operation times out
2 After connecting the Ethernet port, install and configure your Ethernet Port. For detailed instructions, see the “Ethernet
Configuration (FC-11) guide.pdf” file in the technical support section on our Web site: http://www.kramerelectronics.com

Operating the VS-66H 6x6 HDMI Matrix Switcher
KRAMER: SIMPLE CREATIVE TECHNOLOGY
16
After connecting the Ethernet port, configure your PC as follows:
1. Right-click the My Network Places icon on your desktop.
2. Select Properties.
3. Right-click Local Area Connection Properties.
4. Select Properties.
The Local Area Connection Properties window appears.
5. Select the Internet Protocol (TCP/IP) and click the Properties Button (see
Figure 3).
Figure 3: Local Area Connection Properties Window
6. Select Use the following IP Address, and fill in the details as shown in
Figure 4.
7. Click OK.
Figure 4: Internet Protocol (TCP/IP) Properties Window

Technical Specifications
17
7.5.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable)
You can connect the Ethernet port of the VS-66H to the Ethernet port on a
network hub or network router, via a straight through cable with RJ-45
connectors.
8 Technical Specifications
Table 2 includes the technical specifications:
Table 2: Technical Specifications1
INPUTS:
of the VS-66H
6 HDMI Connectors
OUTPUTS: 6 HDMI Connectors
BANDWIDTH: Supports up to 1.65Gbps bandwidth per graphic channel
COMPLIANCE WITH HDMI
STANDARD:
Supports HDMI and HDCP
RESOLUTION: Up to UXGA; 1080p
POWER SOURCE: 100−240V AC; 50/60Hz, 32VA
CONTROLS: Front panel buttons, infrared remote control transmitter, RS-232, Ethernet
DIMENSIONS: 19” x 7” x 1U W, D, H
WEIGHT: 2.5kg (5.5lbs) approx.
ACCESSORIES: Power cord, rack “ears”, IR remote control
OPTIONS: Kramer HDMI cables 2
9 Communication Parameters
Table 3: Communication Parameters
RS-232
Protocol 2000
Baud Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Command Format: HEX
Example (Output 1 to Input 1): 0x01, 0x81, 0x81, 0x81
Ethernet
Default Settings Reset Ethernet Default Settings
IP Address: 192.168.1.39 Power cycle the unit while holding in the Factory Reset
button, located on the rear panel of the unit.
TCP Port #: 5000
1 Specifications are subject to change without notice
2 For best results, use Kramer cables such as the C-HM/HM series, the C-HM/DM series and/or our HDMI over fiber optics
C-FOHM/FOHM series

Kramer Protocol 2000
KRAMER: SIMPLE CREATIVE TECHNOLOGY
18
10 Kramer Protocol 2000
The VS-66H is compatible with Kramer’s Protocol 20001(version 0.50)
(below)2
Table 4: Protocol Definitions
. This RS-232/RS-485 communication protocol uses four bytes of
information as defined below. The default data rate is 9600 baud, with no
parity, 8 data bits and 1 stop bit.
MSB
LSB
DESTI-
NATION
INSTRUCTION
0
D
N5
N4
N3
N2
N1
N0
7
6
5
4
3
2
1
0
1st byte
INPUT
1
I6
I5
I4
I3
I2
I1
I0
7
6
5
4
3
2
1
0
2nd byte
OUTPUT
1
O6
O5
O4
O3
O2
O1
O0
7
6
5
4
3
2
1
0
3rd byte
MACHINE NUMBER
1
OVR
X
M4
M3
M2
M1
M0
7
6
5
4
3
2
1
0
4th byte
1st BYTE: Bit 7 – Defined as 0.
D – “DESTINATION”: 0 - for sending information to the switchers (from the PC);
1 - for sending to the PC (from the switcher).
N5…N0 – “INSTRUCTION”
The function that is to be performed by the switcher(s) is defined by the INSTRUCTION (6 bits). Similarly, if a function is performed
via the machine’s keyboard, then these bits are set with the INSTRUCTION NO., which was performed. The instruction codes are
defined according to the table below (INSTRUCTION NO. is the value to be set for N5…N0).
2nd BYTE: Bit 7 – Defined as 1.
I6…I0 – “INPUT”.
When switching (ie. instruction codes 1 and 2), the INPUT (7 bits) is set as the input number which is to be switched. Similarly, if
switching is done via the machine’s front-panel, then these bits are set with the INPUT NUMBER which was switched. For other
operations, these bits are defined according to the table.
3rd BYTE: Bit 7 – Defined as 1.
O6…O0 – “OUTPUT”.
When switching (ie. instruction codes 1 and 2), the OUTPUT (7 bits) is set as the output number which is to be switched. Similarly, if
switching is done via the machine’s front-panel, then these bits are set with the OUTPUT NUMBER which was switched. For other
operations, these bits are defined according to the table.
4th BYTE: Bit 7 – Defined as 1.
Bit 5 – Don’t care.
OVR – Machine number override.
M4…M0 – MACHINE NUMBER.
Used to address machines in a system via their machine numbers. When several machines are controlled from a single serial port, they
are usually configured together with each machine having an individual machine number. If the OVR bit is set, then all machine
numbers will accept (implement) the command, and the addressed machine will reply.
For a single machine controlled via the serial port, always set M4…M0 = 1, and make sure that the machine itself is configured as
MACHINE NUMBER = 1.
1 The instruction codes in Table 4 are a sub-set of the Protocol 2000. You can find the full protocol on our Web site at
http://www.kramerelectronics.com
2 You can download our user-friendly “Software for Calculating Hex Codes for Protocol 2000” from the technical support
section on our Web site at: http://www.kramerelectronics.com