Avalue Technology EAX-W480P User manual

Part No. E2047AW4801R
EAX-W480P
Intel® 10th Generation Core™ Processor ATX Motherboard
With Intel® W480E Chipset
User’s Manual
2nd Ed –08 April 2021

EAX-W480P User’s Manual
2 EAX-W480P User’s Manual
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2021 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

User’s Manual
EAX-W480P User’s Manual
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

EAX-W480P User’s Manual
4 EAX-W480P User’s Manual
Product Warranty
Avalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Avalue, or which have been subject to
misuse, abuse, accident or improper installation. Avalue assumes no liability under the
terms of this warranty as a consequence of such events. Because of Avalue’s high
quality-control standards and rigorous testing, most of our customers never need to use our
repair service. If any of Avalue’s products is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will be billed according
to the cost of replacement materials, service time, and freight. Please consult your dealer
for more details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example,
CPU type and speed, Avalue’s products model name, hardware & BIOS
revision number, other hardware and software used, etc.) Note anything
abnormal and list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material
authorization) number from your dealer. This allows us to process your good
return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales
receipt) in a shippable container. A product returned without proof of the
purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it
prepaid to your dealer.

User’s Manual
EAX-W480P User’s Manual
5
Content
1. Getting Started............................................................................................................9
1.1 Safety Precautions....................................................................................................9
1.2 Packing List...............................................................................................................9
1.3 Document Amendment History ...............................................................................10
1.4 Manual Objectives...................................................................................................11
1.5 System Specifications.............................................................................................12
1.6 Architecture Overview—Block Diagram..................................................................15
2. Hardware Configuration...........................................................................................16
2.1 Product Overview....................................................................................................17
2.2 Jumper and Connector List.....................................................................................18
2.3 Setting Jumpers & Connectors ...............................................................................20
2.3.1 Serial port 3 pin9 signal select (JRI3) ............................................................................................ 20
2.3.2 Serial port 2 pin9 signal select (JRI2) ............................................................................................ 20
2.3.3 Serial port 1 pin9 signal select (JRI1) ............................................................................................ 21
2.3.4 BIOS ME function configuration (JME1) ........................................................................................ 21
2.3.5 Clear CMOS (JCMOS1)................................................................................................................. 22
2.3.6 CPU TDP (Watts) (JCFGID1)......................................................................................................... 22
2.3.7 PCI-e slot SMBus On off connector (JPSMB1).............................................................................. 23
2.3.8 PCI-e slot SMBus On off connector (JPSMB2).............................................................................. 23
2.3.9 PCI-e slot SMBus On off connector (JPSMB3).............................................................................. 24
2.3.10 PCI-e slot SMBus On off connector (JPSMB4)............................................................................. 24
2.3.11 PCI-e slot SMBus On off connector (JPSMB5)............................................................................. 25
2.3.12 PCI-e slot SMBus On off connector (JPSMB6)............................................................................. 25
2.3.13 AT/ATX Power Mode Select (JSATX1)......................................................................................... 26
2.3.14 General purpose I/O connector (DIO1) ......................................................................................... 26
2.3.15 ATX Power connector (ATXPWR1)............................................................................................... 27
2.3.16 Power connector (ATX12V1)......................................................................................................... 27
2.3.17 SMBus connector (JSMB1)........................................................................................................... 28
2.3.18 LPC connector (JLPC1)................................................................................................................. 28
2.3.19 Battery connector (BAT2).............................................................................................................. 29
2.3.20 Miscellaneous setting connector (SPI1)........................................................................................ 29
2.3.21 Front Panel connector (JFP1) ....................................................................................................... 30
2.3.22 CPU fan connector (CPUFAN1).................................................................................................... 30
2.3.23 System fan connector 1 (SYSFAN1)............................................................................................. 31
2.3.24 External Speaker connector (JBZ1) .............................................................................................. 31
2.3.25 Auxiliary Panel connector (JAUXP1)............................................................................................. 32

EAX-W480P User’s Manual
6 EAX-W480P User’s Manual
2.3.26 Auxiliary Panel connector (JAUXP2)............................................................................................. 32
2.3.27 Serial port 2 connector (COM2)..................................................................................................... 33
2.3.28 USB connector (JUSB1)................................................................................................................ 33
2.3.29 USB connector 4 (JUSB4)............................................................................................................. 34
2.3.30 USB connector 5 (JUSB5)............................................................................................................. 34
2.3.31 J1RS2 connector (J1RS2)............................................................................................................. 35
2.3.32 J1RS3 connector (J1RS3)............................................................................................................. 35
2.3.33 Auxiliary Fan connector (AUXFAN1)............................................................................................. 36
2.3.34 JPC1 connector (JPC1)................................................................................................................. 36
2.3.35 Serial port connector (4COM1)...................................................................................................... 37
2.3.36 Serial port connector (4COM2)...................................................................................................... 38
3.BIOS Setup....................................................................................................................39
3.1 Introduction .............................................................................................................40
3.2 Starting Setup .........................................................................................................40
3.3 Using Setup ............................................................................................................41
3.4 Getting Help............................................................................................................42
3.5 In Case of Problems................................................................................................42
3.6 BIOS setup..............................................................................................................43
3.6.1 Main Menu...................................................................................................................................... 43
3.6.1.1 System Language.................................................................................................................. 44
3.6.1.2 System Date.......................................................................................................................... 44
3.6.1.3 System Time.......................................................................................................................... 44
3.6.2 Advanced Menu ............................................................................................................................. 44
3.6.2.1 CPU Configuration................................................................................................................. 45
3.6.2.1.1 CPU - Power Management Control....................................................................................... 45
3.6.2.2 PCH-FW Configuration.......................................................................................................... 46
3.6.2.2.1 OEM Flags Settings............................................................................................................... 47
3.6.2.2.2 Firmware Update Configuration............................................................................................. 47
3.6.2.3 ACPI Settings ........................................................................................................................ 48
3.6.2.4 Super IO Configuration.......................................................................................................... 49
3.6.2.4.1 Serial Port 1 Configuration .................................................................................................... 50
3.6.2.4.2 Serial Port 2 Configuration .................................................................................................... 50
3.6.2.4.3 Serial Port 3 Configuration .................................................................................................... 51
3.6.2.4.4 Serial Port 4 Configuration .................................................................................................... 52
3.6.2.4.5 Serial Port 5 Configuration .................................................................................................... 52
3.6.2.4.6 Serial Port 6 Configuration .................................................................................................... 53
3.6.2.4.7 Serial Port 7 Configuration .................................................................................................... 53
3.6.2.4.8 Serial Port 8 Configuration .................................................................................................... 54
3.6.2.4.9 Serial Port 9 Configuration .................................................................................................... 54
3.6.2.4.10 Serial Port 10 Configuration .................................................................................................. 55

User’s Manual
EAX-W480P User’s Manual
7
3.6.2.5 NCT6106D H/W Monitor........................................................................................................ 55
3.6.2.5.1 Smart Fan Configuration ....................................................................................................... 56
3.6.2.6 S5 RTC Wake Settings.......................................................................................................... 57
3.6.2.7 Serial Port Console Redirection ............................................................................................ 58
3.6.2.8 USB Configuration................................................................................................................. 58
3.6.2.9 Network Stack Configuration................................................................................................. 59
3.6.2.10 NVMe Configuration .............................................................................................................. 60
3.6.3 Chipset ........................................................................................................................................... 60
3.6.3.1 System Agent (SA) Configuration.......................................................................................... 61
3.6.3.1.1 Memory Configuration ........................................................................................................... 61
3.6.3.1.2 Graphics Configuration.......................................................................................................... 62
3.6.3.1.3 DMI/OPI Configuration .......................................................................................................... 63
3.6.3.1.4 PEG Port Configuration......................................................................................................... 63
3.6.3.1.4.1PEG Port Feature Configuration............................................................................................ 65
3.6.3.2 PCH-IO Configuration............................................................................................................ 65
3.6.3.2.1 PCI Express Configuration .................................................................................................... 66
3.6.3.2.1.1PCI Express Slot 1 (PCI-E Port 1~4)..................................................................................... 66
3.6.3.2.1.2PCI Express Slot 2 (PCI-E Port 5~8)..................................................................................... 67
3.6.3.2.1.3PCI Express Slot 3 (PCI-E Port 17~20)................................................................................. 68
3.6.3.2.1.4PCI Express Slot 4 (PCI-E Port 21~24)................................................................................. 69
3.6.3.2.1.5Intel I211/I210 LAN Chip (PCI-E Port 10).............................................................................. 70
3.6.3.2.1.6Intel I225 LAN Chip (PCI-E Port 11)...................................................................................... 71
3.6.3.2.1.7M.2 KeyB (PCI-E Port 12) ..................................................................................................... 72
3.6.3.2.1 SATA And RST Configuration ............................................................................................... 73
3.6.3.3 Board Configuration............................................................................................................... 74
3.6.4 Security........................................................................................................................................... 75
3.6.4.1 Secure Boot ............................................................................................................................... 75
3.6.5 Boot................................................................................................................................................ 76
3.6.6 Save & Exit..................................................................................................................................... 77
3.6.5.1 Save Changes and Reset...................................................................................................... 77
3.6.5.2 Discard Changes and Reset.................................................................................................. 77
3.6.5.3 Restore Defaults.................................................................................................................... 78
3.6.5.4 Launch EFI Shell from filesystem device .............................................................................. 78
4. Drivers Installation.......................................................................................................79
4.1 Install Chipset Driver...............................................................................................80
4.2 Install VGA Driver....................................................................................................81
4.3 Install ME Driver......................................................................................................82
4.4 Install LAN Driver....................................................................................................83
4.5 Install RST Driver....................................................................................................85
4.6 Install Serial IO Driver .............................................................................................87

EAX-W480P User’s Manual
8 EAX-W480P User’s Manual
5. Mechanical Drawing ....................................................................................................88

User’s Manual
EAX-W480P User’s Manual
9
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EAX-W480P motherboard
2 x SATA cables
1 x I/O Shield

EAX-W480P User’s Manual
10 EAX-W480P User’s Manual
1.3 Document Amendment History
Revision
Date
By
Comment
1st
January 2021
Avalue
Initial Release
2nd
April 2021
Avalue
Update Jumper and Connector

User’s Manual
EAX-W480P User’s Manual
11
1.4 Manual Objectives
This manual describes in details Avalue Technology EAX-W480P Single Board.
We have tried to include as much information as possible but we have not duplicated
information that is provided in the standard IBM Technical References, unless it proved to
be necessary to aid in the understanding of this board.
We strongly recommend that you study this manual carefully before attempting to set up
EAX-W480P or change the standard configurations. Whilst all the necessary information is
available in this manual we would recommend that unless you are confident, you contact
your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that
make booting impossible. If this should happen, clear the CMOS settings, (see the
description of the Jumper Settings for details).
If you have any suggestions or find any errors regarding this manual and want to inform us
of these, please contact our Customer Service department with the relevant details.

EAX-W480P User’s Manual
12 EAX-W480P User’s Manual
1.5 System Specifications
System
CPU
Intel® Xeon® W-1200 series & 10th Gen Supports LGA 1200 CPU Up to 125W Max
BIOS
AMI uEFI BIOS, 256Mbit SPI Flash ROM
System Chipset
Intel® W480E Chipset
I/O Chip
Nuvoton® NCT6106D
Fintek F81216AD
System Memory
Four 288-pin DDR4 U- DIMM socket, supports up to 128GB Max
Watchdog Timer
H/W Reset, 5~255 seconds/5~255 minutes
H/W Status
Monitor
CPU temperature monitoring
Voltages monitoring
CPU fan speed control
RAID
Support RAID 0, 1, 5, 10
TPM
A1 remove (Infineon SLB9665 support TPM 2.0 By option)
iAMT
YES, by CPU
Expansion Slot
M.2
1 x M.2 (2242/2260/2280) B-Key, support SSD PCI-e x1 Signal
PCIe
2 x PCI-e x16 slot for 1 x PCI-e x16 or 2 x PCI-e x8 (By Auto switch IC)
4 x PCI-e x4
Storage
M.2
1 x M.2 (2242/2260/2280) B-Key, support SSD PCI-e x1 Signal
SATA
4 x SATA III
Edge I/O
COM
COM 1 by DB9 Connector at IO support RS-232
LAN
1 x Intel® I219LM Gigabit Ethernet PHY
1 x Intel® I210AT PCI-e Gigabit Ethernet
1 x Intel® I225V 2.5 Gigabit Ethernet Controller
USB 2.0
PS/2 KB/MS + 2 x USB 2.0
USB 3.1
3 x RJ-45 Dual deck for 6 x USB 3.1 GEN 2 connector
DP
2 x DP++
DVI
DVI-D
Onboard I/O
COM
COM 1 by DB9 Connector at IO support RS-232
COM 2~3: Support RS232/422/485 selected by BIOS selection
3 x 2 x 3 pin, pitch 2.00mm connector for COM 1~3 support RS232 with Pin
9,+5V/+12V/RI by jumper
2 x 2 x 3 pin, pitch 2.00mm connector for COM 2~3 support RS422/485 connector,

User’s Manual
EAX-W480P User’s Manual
13
Pin 5 with +5V
1 x 2 x 5 pin, pitch 2.00mm connector for COM 2 support RS-232 connector
COM 3~6
1 x 2 x 20 pin, pitch 2.00mm connector for COM 3~6 support RS-232 connector
COM 7~10
1 x 2 x 20 pin, pitch 2.00mm connector for COM 7~10: support RS-232 connector
USB 2.0
1 x 1 x 5 pin, pitch 2.54mm connector for 1 x USB 2.0
2 x 2 x 5 pin, pitch 2.54mm connector for 4 x USB 2.0
1 x USB 2.0 By Vertical type A connector
USB Wake up by BIOS Setting
GPIO
1 x 2 x 10 pin, pitch 2.00mm connector for GPIO: 16 bits & +5VS Level SMBus
CPU/System
FAN
1 x 1 x 4 pin, pitch 2.54mm CPU fan connector with smart fan function supported
1 x 1 x 4 pin, pitch 2.54mm System fan connector with smart fan function supported
1 x 1 x 3 pin, pitch 2.54mm System fan connector
Front Panel
1 x 2 x 5 pin, pitch 2.54mm connector for front panel
RTC Battery
1 x Horizontal type battery connector (CR2450 Battery)
Co-lay 1 x 2 Pin Pitch 1.25mm horizontal type battery connector
AT/ATX Selector
1 x 1 x 3 pin pitch 2.00mm connector for AT/ATX jumper
1 x 2 x 12 pin ATX power connector
1 x 2 x 4 pin ATX 12V power connector
Clear CMOS
1 x 1 x 3pin, pitch 2.54mm connector for COMS Clear
LPC
2 x 2 x 5 pin, pitch 2.0mm connector for LPC
BIOS SPI
1 x 2 x 4 pin, pitch 2.00mm connector for BIOS SPI
Other
1 x 2 x 10 pin, pitch 2.54mm connector for Auxiliary panel
1 x 2 x 5 pin, pitch 2.54mm connector for JME
1 x 5 pin, pitch 2.54mm connector for +3.3S Level SMBus
Display
Graphic Chipset
Intel® 10th Generation CPU integrated
Spec. &
Resolution
DVI-D: 2048 x 1536 @ 60Hz
2 x DP++: 3840 x 2160 @ 60Hz
Note: This resolution is actual test result. Intel resolution as below:
DP (1.4) : max resolution 4096x2304@60 (without HDR)
: max resolution 3840x2160@60 (with HDR)
Or
HDMI (1.4) : max resolution 4096x2160@30 (not support HDR)
Multiple Display
Triple Display
Ethernet
LAN Chipset
1 x Intel® I219LM Gigabit Ethernet PHY
1 x Intel® I210AT PCI-e Gigabit Ethernet

EAX-W480P User’s Manual
14 EAX-W480P User’s Manual
1 x Intel® I225V 2.5 Gigabit Ethernet Controller
LAN Spec.
10/100/1000 Base-Tx GbE compatible
Mechanical & Environmental Specification
Power
Requirement
+12V / +5V / 5VSB /+3.3V /-12V
ACPI
Single power ATX Support S0, S3, S4, S5
Power Mode
AT / ATX mode Switchable Through Jumper
Operating Temp.
0~60°C (32~140°F)
Storage Temp.
-40~ +75°C
Operating
Humidity
40°C @ 95% Relative Humidity, Non-condensing
Size (L x W)
12" x 9.6" (304.8mm x 243.84mm)
Weight
1.32lbs (0.6kg)
OS Information
BIOS Support:
1. Win10 64bit UEFI
2. Linux
Note: Specifications are subject to change without notice.

User’s Manual
EAX-W480P User’s Manual
15
1.6 Architecture Overview—Block Diagram
The following block diagram shows the architecture and main components of EAX-W480P.

EAX-W480P User’s Manual
16 EAX-W480P User’s Manual
2. Hardware
Configuration

User’s Manual
EAX-W480P User’s Manual
17
2.1 Product Overview

EAX-W480P User’s Manual
18 EAX-W480P User’s Manual
2.2 Jumper and Connector List
You can configure your board to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch.
It consists of two metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case, you would connect either two pins.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
If you have any doubts about the best hardware configuration for your application, contact
your local distributor or sales representative before you make any changes.
The following tables list the function of each of the board’s jumpers and connectors.
Jumpers
Label
Function
Note
JRI1/2/3
Serial port 1/2/3 pin9 signal select
3 x 2 header, pitch 2.00mm
JME1
BIOS ME function configuration
3 x 1 header, pitch 2.54mm
JSATX1
AT/ATX Power Mode Select
3 x 1 header, pitch 2.00mm
JCMOS1
Clear CMOS
3 x 1 header, pitch 2.54mm
JCFGID1
CPU TDP (Watts)
3 x 1 header, pitch 2.54mm
JPSMB1/2/3/4/5/6
PCI-e slot SMBus On off connector
3 x 2 header, pitch 2.00mm
Connectors
Label
Function
Note
CPUFAN1
CPU fan connector
4 x 1 wafer, pitch 2.54mm
SYSFAN1
System fan connector 1
4 x 1 wafer, pitch 2.54mm

User’s Manual
EAX-W480P User’s Manual
19
(with smart fan function supported)
JFP1
Front Panel connector
5 x 2 header, pitch 2.54 mm
DIMMA1/2
240-pin DIMM slot 1
DIMMB1/2
240-pin DIMM slot 2
JSMB1
SMBus connector
5 x 1 header, pitch 2.54 mm
JAUXP1
Auxiliary Panel connector
10 x 2 header, pitch 2.54 mm
JAUXP2
Auxiliary Panel connector
4 x 1 header, pitch 2.54 mm
SPI1
Miscellaneous setting connector
4 x 2 header, pitch 2.00mm
COM1
Serial Port1 connector
COM2
Serial Port2 connector
5 x 2 header, pitch 2.00 mm
4COM1/2
Serial Port connector
20 x 2 header, pitch 2.00mm
JBZ1
External Speaker connector
4 x 1 header, pitch 2.54 mm
DIO1
General purpose I/O connector
10 x 2 header, pitch 2.00mm
LAN1/2/3
2 x RJ-45 with Dual deck USB 3.0
connector
PS2USB1
PS2+USB connector
JUSB1
USB connector
5 x 1 header, pitch 2.54mm
JUSB3
USB connector
JUSB4
USB connector
5 x 2 header, pitch 2.54mm
JUSB5
USB connector
5 x 2 header, pitch 2.54mm
J1RS2
J1RS2 connector
3 x 2 header, pitch 2.00 mm
J1RS3
J1RS3 connector
3 x 2 header, pitch 2.00 mm
JLPC1
LPC connector
5 x 2 header, pitch 2.00mm
PCIE1/2/3/4
PCIe slot 1/2/3/4
M2KB1
M.2 Key B
BAT1
Battery connector
BAT2
Battery connector
2 x 1 wafer, pitch 1.25mm
AUXFAN1
Auxiliary Fan connector
3 x 1 wafer, pitch 2.54mm
ATXPWR1
ATX Power connector
12 x 2 wafer, pitch 4.20mm
ATX12V1
Power connector
2 x 4 wafer, pitch 4.20mm
JSATA1/2/3/4
Serial ATA connector 1/2/3/4
CPU
CPU connector
DP1
DP connector
DVI1
DVI1 connector
PEG1/2
PCI-e x16 slots 1/2
JPC1
JPC1 connector
3 x 2 header, pitch 2.00 mm

EAX-W480P User’s Manual
20 EAX-W480P User’s Manual
2.3 Setting Jumpers & Connectors
2.3.1 Serial port 3 pin9 signal select (JRI3)
* Default
Ring*
+5V
+12V
2.3.2 Serial port 2 pin9 signal select (JRI2)
* Default
Ring*
+5V
+12V