Avalue Technology UB-T100 User manual

Part No. E2017UBA1A0R
UB-T100
UWB Tag
Quick Reference Guide
1st Ed – 10 Oct. 2020
Copyright Notice
Copyright  2020 Avalue Technology Inc., ALL RIGHTS RESERVED.

UB-A100
2 UB-T100 Quick Reference Guide
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

Quick Reference Guide
UB-A100 Quick Reference Guide 3
Content

1.Getting Started ........................................................................................................ 4
1.1Safety Precautions .................................................................................................... 4
1.2Packing List ............................................................................................................... 4
1.3System Specifications ............................................................................................... 5
1.4System Overview ...................................................................................................... 6
1.5System Dimensions .................................................................................................. 7
1.6Operating .................................................................................................................. 7

UB-A100
4 UB-T100 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
 1 x USB Charging Cable

Quick Reference Guide
UB-A100 Quick Reference Guide 5
1.3 System Specifications
UWB RF Specifications
Chip Decawave DW1000
Physical rate 850K bps
6.8 Mbps
Antenna peak gain 2.6dBi
UWB RF Specifications
Chip Decawave DW1000
Physical rate 850K bps
6.8 Mbps
Software
UWB operating mode TDoA
Warning SOS, emergency button
Low Power
System
Indicator Light
LED 1 (Green): Power Status
Normal mode, the LED indicator OFF
LED 2 (RGB) : Battery Status
When fully charge, the LED indicator remain lit with Blue.
When charging, the LED indicator flashes with Orange.
When low power, the LED indicator flashes with Red.
When normal battery power, the LED indicator OFF
Others 1 x Button
When press button, Tag will broadcast ONE UWB signal package
Mechanical
Power Connector Type Magnetic Charging
Power Requirement +5V DC-in
Dimension 90 x 60 x 10mm
Weight 0.27kg
Color Black / White / Gray
Reliability
EMI Test CE/FCC ClassB
Safety UL/CB design compatible
Operating Temperature 0°C~40°C
Operating Humidity 40°C @ 95% Relative Humidity, Non-condensing
Storage Temperature -40°C~90°C

UB-A100
6 UB-T100 Quick Reference Guide
Note: Specifications are subject to change without notice.
1.4 System Overview
Label Function
LED1 Battery Status
LED2 Power Status
BUTTON Send Signal
POWER
Connector
Magnetic Charging

Quick Reference Guide
UB-A100 Quick Reference Guide 7
1.5 System Dimensions
1.6 Operating
(Unit: mm)