AVARRO 0E-HDMISW3X1 User manual

For more information please call 1-833-574-9124 or email [email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
MANUAL
HDMI SWITCHER
3 INPUTS x 1 OUTPUT
0E-HDMISW3X1

1
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Table of Contents
Introduction ....................................................................................... 2
Overview .................................................................................... 2
Features ..................................................................................... 2
Package Contents ..................................................................... 2
Panel .......................................................................................... 3
Specification .............................................................................. 4
Wiring ................................................................................................ 5
IR Remote Handset........................................................................... 6
Troubleshooting................................................................................. 6
Limited Warranty ............................................................................... 8
Introduction ..................................................................................... 12
Aperçu...................................................................................... 12
Caractéristiques....................................................................... 12
Contenu.................................................................................... 13
Panneau ................................................................................... 13
Spécifications .......................................................................... 15
Câblage ........................................................................................... 16
Télécommande IR ........................................................................... 17
Dépannage...................................................................................... 18
Garantie limitée ............................................................................... 20
Introducción .................................................................................... 24
Descripción .............................................................................. 24
Características ......................................................................... 24
Contenido del paquete ............................................................ 25
Panel ........................................................................................ 25
Especificaciones ...................................................................... 26
Cableado......................................................................................... 27
Mando a distancia por IR................................................................ 28
Solución de problemas ................................................................... 29
Garantía limitada............................................................................. 31

2
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Introduction
Overview
0E-HDMISW3X1 is a 3 by 1 4K HDMI with HDCP 2.2 switcher which
supports resolutions up to 4K@60Hz 4:2:0 8bit, a perfect solution for
managing multiple sources. It provides three inputs for direct connection
of HDMI devices, which
gives you a high-performance connection between three sources and a
display without signal loss.
A desired HDMI source can be easily selected for the display from the
panel switch button or using the supplied IR remote. The front panel
LEDs show the currently selected source.
Features
Easy to use, install in seconds.
Supports up to 4K@60 Hz 4:2:0 8bit.
HDCP 2.2 compliant.
Supports HDMI transmission distance up to 3 meters at 4K@60Hz
4:2:0 8bit.
Supports HDMI source devices for power supplying.
Supports remote control and front panel button control.
Note:
In order to ensure proper functionality, make sure the resolution
of the sink is set to 4K@60Hz 4:2:0 or less when both the connected
sources and sink support 4K@60Hz 4:4:4 8 bit.
Package Contents
Before you start the installation of the product, please check the
package contents:
1 x 0E-HDMISW3X1
1 x IR Remote
1 x IR Receiver Cable
2 x Mounting Brackets
1 x User Manual

3
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Panel
Front Panel
ID.
Name
Description
1 IR IN
Receiving IR signal.
Note:
The IR receiver enabled angle and distance:
Enabled
Angel
0°
30°(Horizontal)
15°(Vertical)
Distance
9m(Max)
5m(Max)
4m(Max)
2
SWITCH
Button
Press to cycle through different sources.
3
POWER
LED
STREADY BLUE:
The splitter is powered on.
4 HDMI IN
(1~3) LED
STREADY BLUE: When sources devices are powered
on and connected to the switcher.
OFF: No source device is connected or it is powered off.
5 HDMI
OUT LED
STREADY BLUE: The HDMI display is powered on and
connected to corresponding output.
OFF: No HDMI display is connected or it is powered off.
Rear Panel
12 3 45
21 3

4
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
ID.
Name
Description
1 HDMI IN (1-3) Connect to HDMI sources.
2
HDMI OUT
Connect to an HDMI display
3 IR EXT.
Connect to the supplied IR Receiver cable, for
controlling the switcher.
Specification
Technical
Input/Output Signal Type
HDMI1.4 with HDCP 2.2
Input/Output Resolution
Supported
VESA:
800x6008, 1024x7688, 1280x7688,1280x8008,
1280x9608, 1280x10248,1360x7688, 1366x7688,
1400x10508, 1440x9008, 1600x9008,
1600x12008,1680x10508, 1920x12008
SMPTE:
1280x720P1,2,3,4,5,6,7,8, 1920x1080I6,8,
1920x1080P1,2,3,4,5,6,7,8,
3840x21602,3,5,6,8, 4096x21602,3,5,6,8;
1 = at 23.98 Hz, 2 = at 24 Hz, 3 = at 25 Hz,
4 = at 29.97 Hz, 5 = at 30 Hz, 6 = at 50 Hz,
7 = at 59.94 Hz, 8 = at 60 Hz
NOTE:
4096x2160/3840x2160@50Hz/60Hz is based
on chroma sub-sampling 4:2:0 8-bit only.
Control Method
IR remote control, Panel SWITCH button
General
Operating Temperature
0°C to + 45°C (32 to + 113 °F)
Storage Temperature
-20 to +70°C (-4 to + 158 °F)
Humidity
20% to 90%, non-condensing
Surge Protection
Voltage: ±1 kV
ESD Protection
Human Body Model:
±8kV (air-gap discharge)/
±4kV (contact discharge)
Power Consumption (Max)
0.25 W
Dimensions 11.0cm × 7.02cm × 2.1cm/ 4.35” × 2.77” ×
0.83”
Product Weight 0.22kg/0.48lb

5
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Wiring
1. Connect HDMI source devices to the HDMI input ports via HDMI
cables.
2. Connect an HDMI display to the HDMI output port via an HDMI
cable.
3. Connect the IR receiver cable to the IR EXT port if you need to
extend the control distance.
4. Power on all the devices. Now you can use the panel SWITCH
button or the included remote to control the switcher.
Note: When you use the IR extend, the IR IN window on the other panel
will be disabled.
5
1 2 3
4 5
1 2 3
4 5
HDMI IN HDMI IN HDMI IN HDMI OUT
Blu-ray Player/
Lecteur Blu-ray/
Reproductor de Blu-ray
Blu-ray Player/
Lecteur Blu-ray/
Reproductor de Blu-ray
Blu-ray Player/
Lecteur Blu-ray/
Reproductor de Blu-ray
Or/Ou/O
Remote/
télécommande/
control remoto
Remote/
télécommande/
control remoto

6
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
IR Remote Handset
The included remote control can be used to switch three HDMI sources
to one display device.
Note:
Please make sure that the remote is pointed directly at the IR
receive window or IR receiver cable head.
Troubleshooting
Most problems that occur are due to simple issues. If you have trouble,
please check the list of simple fixes below.
Five Steps of Regular Troubleshooting Routine
1. Power: Make sure all devices are powered on. (source, switcher,
display devices)
Switch to next
source input
This button is
unavailable
This button is
unavailable
Switch to previous
source input
Select source
1/2/3

7
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
2. Indicator: Make sure LED indicators of switcher are normal
according to user manual.
3. Devices: Make sure picture can be shown normally when
connecting source to display devices directly.
4. Cable: Plug in and out HDMI cable or change another HDMI cable.
For 4K@60Hz, HDMI cable should be less than 3m and standard
HDMI cable is needed.
5. Compatibility: Please test other source and display devices to
determine whether it is a compatibility issue.
Typical questions
1. How to deal with video flash or cut off during the installation?
Verify that all the indicators are solid on. If not, please check if
the power adapter or HDMI cables are well connected.
Verify that the display device work properly and that the source
devices have normal signals output.
2. How to deal with a weak or not working IR signal?
Make sure the IR cable is correctly installed according to the
diagram above.
Pay attention to the control angle and distance as below: The
control signal will be better when your controller is pointed at
the IR receiver head directly.
Using the IR IN window on switcher panel:
Enabled Angle 0° 30°(Horizontal) 15°(Vertical)
Distance 9m(Max) 5m(Max) 4m(Max)
Using the IR extend receiver cable:
Enabled Angle 0° 30°(Horizontal) 15°(Vertical)
Distance 8m(Max) 4.5m(Max) 3m(Max)

8
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Limited Warranty
1. Limited Warranty
a.
General
Subject to the terms and conditions of this Limited Warranty, from the date of
sale through the period of time for product categories specified in Section 1(b),
ADI warrants AVARRO branded products to be free from defects in materials
and workmanship under normal use and service, normal wear and tear excepted.
Except as required by law, this Limited Warranty is only made to Buyer and may
not be transferred to any third party.
ADI shall have no obligation under this Limited Warranty or otherwise if:
(i) The product is improperly installed, applied or maintained;
(ii) The product is installed outside of stated operating parameters, altered, or
improperly services or repaired;
(iii) Damage is caused by outside natural occurrences, such as lightning, power
surges, fire, floods, acts of nature, or the like.
(iv) Defects resulting from unauthorized modification, misuse, vandalism, or
other causes unrelated to defective materials or workmanship, or failures
related to batteries of any type used in connection with the products sold
hereunder.
ADI only warrants those products branded AVARRO and sold by ADI. Any
other products branded by third parties are warranted by the third-party
manufacturer for a period as defined by the third-party manufacturer, and ADI
assigns to Buyer those warranties and only those warranties extended by such
third-party manufacturers or vendors for non-ADI branded products. ADI does
not itself warrant any non-ADI branded product and sells only on an as is basis
in accordance with ADI’s terms and conditions of sale.
b.
Specific Warranties for product categories are as follows:
Product Categories
Warranty Period
HDMI Distribution 2 years

9
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
2. EXCLUSION OF WARRANTIES, LIMITATION OF LIABILITY
THERE ARE NO WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, OF
MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR
OTHERWISE, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF. TO THE FULLEST EXTENT PERMITTED BY LAW, IN NO CASE
SHALL ADI BE LIABLE TO ANYONE FOR ANY (I) CONSEQUENTIAL,
INCIDENTAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES ARISING OUT OF
OR RELATING IN ANY WAY TO THE PRODUCT AND.OR FOR BREACH OF
THIS OR ANY OTHER WARRANTY OR CONDITION, EXPRESS OR IMPLIED,
OR UPON ANY OTHER BASIS OF LIABILITY WHATSOEVER, EVEN IF THE
LOSS OR DAMAGE IS CAUSED BY ADI’S OWN NEGLIGENCE OR FAULT AND
EVEN IF ADI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR
DAMAGES. Any product description (whether in writing or made orally by ADI
or ADI’s agents), specifications, samples, models, bulletin, drawings, diagrams,
engineering sheets, or similar materials used in connection with the Buyer’s
order are for the sole purpose of identifying ADI’s products and shall not be
construed as an express warranty or condition. Any suggestions by ADI or
ADI’s agents regarding use, applications or suitability of the products shall not
be construed as an express warranty or condition unless confirmed to be such
in writing by ADI. ADI does not represent that the products it sells may not be
compromised or circumvented; that the products will prevent any personal injury
or property loss by burglary, robbery, fire or otherwise, or that the products will
in all cases provide adequate warning or protection. Buyer understands and
will cause its customer to understand that a properly installed and maintained
product is not insurance or guarantee that such will not cause or lead to personal
injury or property loss. CONSEQUENTLY, ADI SHALL HAVE NO LIABILITY FOR
ANY PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON
ANY CLAIM AT ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO
GIVE WARNING. However, if ADI is held liable whether directly or indirectly for
any loss or damage with respect to the products it sells, regardless of cause or
origin, its maximum liability shall not in any case exceed the purchase price of
the product, which shall be fixed as liquidated damages and not as a penalty

10
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
and shall be the complete and exclusive remedy against ADI.
3. Limitation on Liability to Buyer’s Customers.
Buyer agrees to limit liability to its customers to the fullest extent permitted by
law. Buyer acknowledges that ADI shall only be deemed to give consumers of
its products such statutory warranties as may be required by law and at no time
shall Buyer represent to its customers and/or users of ADI products that ADI
provides any additional warranties. By accepting the products, to the fullest
extent permitted by law, Buyer assumes all liability for, and agrees to indemnity
and hold ADI harmless against and defend ADI from, any and all suits, claims,
demands, causes of action and judgments relating to damages, whether for
personal injury or to personal property, suffered by any person, firm, corporation
or business association, including but not limited to, Buyer’s customers and/or
users of the products because of any failure of the products to detect and/or
warn of the danger for which the goods were designed or any other failure of
the products whether or not such damages are caused or contributed to by the
sold or joint concurring negligence or fault of ADI.
4. Returns
Subject to the terms and conditions listed below, during the applicable warranty
period, ADI will replace Product or provide a credit at purchase at its sole option
free of charge any defective products returned prepaid. Any obligations of ADI
to replace Limited Lifetime warranty products pursuant to this warranty which
result from defect are limited to the availability of replacement product. ADI
reserves the right to replace any such products with the then currently available
products, or provide a credit in its sole discretion. In the event Buyer has a
problem with any ADI product, please call your local ADI branch for return
instructions:
For US call 1-800-233-6261
For Canada call 877-234-7378
For Puerto Rico call 787-793-8830

11
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Be sure to have the model number and the nature of the problem available. In
the event of replacement, the return product will be credited to Buyer’s account
and a new invoice issued for the replacement item. ADI reserves the right to
issue a credit only in lieu of replacement.
If any AVARRO branded products are found to be in good working order or such
product’s inability to function properly is a result of user damage or abuse, the
product will be returned to Buyer in the same condition as received and Buyer
shall be responsible for any return freight changes.
5. Governing Law
The laws of State of New York apply to this Limited Warranty.
6. Miscellaneous
Where any term of this Limited Warranty is prohibited by such laws, it
shall be null and void, but the remainder of the Limited Warranty shall
remain in full force and effect.

12
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Introduction
Aperçu
L’0E-HDMISW3X1 est un commutateur HDMI 3x1 4K avec HDCP 2.2,
qui prend en charge des résolutions jusqu’à 4K à 60 Hz, 4:2:0 8 bits.
C’est la solution idéale pour gérer plusieurs sources. Il offre trois entrées
pour connecter directement des appareils HDMI. Ainsi, vous obtenez
une connexion haute performance entre trois sources et un écran, sans
perte de signal.
Il est possible de sélectionner en toute simplicité la source HDMI
souhaitée pour l’écran grâce à un commutateur sur panneau ou à l’aide
de la télécommande IR fournie. Les voyants du panneau avant indiquent
la source sélectionnée.
Caractéristiques
Facile à utiliser, installation en quelques secondes.
Prend en charge les résolutions jusqu’à 4K à 60 Hz, 4:2:0, 8 bits.
Compatible HDCP 2.2.
Distance de transmission HDMI jusqu’à 3 mètres en 4K à 60 Hz,
4:2:0, 8 bits.
Prise en charge des appareils source HDMI pour l’alimentation.
Télécommande et bouton sur panneau avant.
Remarque : pour garantir le bon fonctionnement du système, vérifiez
que la résolution de l’appareil de destination est de 4K à 60 Hz, 4:2:0 ou
moins lorsque les deux sources sont connectées et qu’il accepte
jusqu’à 4K à 60 Hz, 4:4:4, 8 bits.

13
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Contenu
Avant de commencer l’installation du produit, veuillez verifier le contenu
de la boîte :
1 appareil 0E-HDMISW3X1
1 télécommande IR
1 câble récepteur IR
2 supports de montage
1 manuel d’utilisation
Panneau
Panneau avant
Réf.
Nom
Description
1 IR IN (ENTRÉE IR)
Réception du signal IR Remarque : distance et
angle autorisé du récepteur IR :
Angle
autorisé
0° 30°
(horizontal)
15°
(vertical)
Distance 9 m
(max.)
5 m (max.) 4 m
(max.)
2
Bouton
« SWITCH »
(COMMUTATION)
Appuyez pour sélectionner les différentes
sources.
3
VOYANT
« POWER »
(ALIMENTATION)
Bleu fixe : le séparateur est sous tension.
1 2 3 4 5

14
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Réf.
Nom
Description
4 Voyants HDMI IN
(ENTRÉE HDMI)
Bleu fixe :
un appareil source est sous
tension et connecté au séparateur.
Éteint :
aucun appareil source n’est connecté
ou l’appareil source est hors tension.
5
Voyant
HDMI OUT
(SORTIE HDMI)
Bleu fixe :
l’écran HDMI est sous tension et
connecté à la sortie correspondante.
Éteint :
aucun écran HDMI n’est connecté ou
l’écran est hors tension.
Panneau arrière
Réf.
Nom
Description
1
HDMI IN 1-3
(ENTRÉE HDMI
1 à 3)
Connecter le bloc d'alimentation fourni.
2 HDMI OUT
(SORTIE HDMI)
Connexion à l’appareil HDMI de destination
3 IR EXT. Connexion au câble du récepteur IR fourni pour
contrôler le commutateur à distance.
21 3

15
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Spécifications
Caractéristiques techniques
Type de signal
d’entrée/de sortie
HDMI 1.4 et HDCP 2.2
Résolution d’entrée/de
sortie prise en charge
SMPTE :
1280x720P1,2,3,4,5,6,7,8, 1920x1080I6,8,
1920x1080P1,2,3,4,5,6,7,8 , 3840x21602,3,5,6,8,
4096x21602,3,5,6,8;
VESA :
800x6008, 1024x7688, 1280x7688, 1280x8008,
1280x9608, 1280x10248, 1360x7688, 1366x7688,
1400x10508, 1440x9008, 1600x9008, 1600x12008,
1680x10508, 1920x12008,
1 = à 23,98 Hz, 2 = à 24 Hz, 3 = à 25 Hz, 4 = à 29,97
Hz, 5 = à 30 Hz, 6 = à 50 Hz, 7 = à 59,94 Hz, 8 = à 60
Hz
REMARQUE :
4096x2160/3840x2160 à
50 Hz/60 Hz est basé
sur le
sous-échantillonnage de la chrominance
4:2:0, 8 bits uniquement
Méthode de commande
Télécommande IR Bouton SWITCH
(Commutation)du panneau
Général
Température de service +32 °F à +113 °F (0 °C à +45 °C)
Température de stockage -4 °F à +158 °F (-20 °C à +70 °C)
Humidité 10 % à 90 %, sans condensation
Protection DES
Modèle du corps humain :
±8 kV (décharge d’entrefer)/
±4 kV (décharge de contact)
Consommationélectrique 0,25 W (max.)
Dimensions
11,0 cm × 7,02 cm × 2,1 cm/4,35 po. ×
2,77 po. × 0,83 po.
Poids
0,48 lb/0,22 kg

16
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Câblage
1. Connectez les appareils sources HDMI aux ports d’entrée HDMI à
l’aide de câbles HDMI.
2. Connectez un écran HDMI au port de sortie HDMI à l’aide d’un câble
HDMI.
3. Connectez le câble du récepteur IR au port IR EXT, si vous devez
étendre la distance de commande.
4. Mettez tous les appareils sous tension. À présent, vous pouvez
utiliser le bouton SWITCH (COMMUTATION) sur le panneau ou la
télécommande fournie pour contrôler le commutateur.
Remarque : lorsque vous utilisez le module d’extension IR, la fenêtre
d’entrée IR de l’autre panneau est désactivée.
5
1 2 3
4 5
1 2 3
4 5
HDMI IN HDMI IN HDMI IN HDMI OUT
Blu-ray Player/
Lecteur Blu-ray/
Reproductor de Blu-ray
Blu-ray Player/
Lecteur Blu-ray/
Reproductor de Blu-ray
Blu-ray Player/
Lecteur Blu-ray/
Reproductor de Blu-ray
Or/Ou/O
Remote/
télécommande/
control remoto
Remote/
télécommande/
control remoto

17
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Télécommande IR
La télécommande fournie peut être utilisée pour sélectionner l’une des
trois sources HDMI à afficher sur un écran.
Remarque : assurez-vous de diriger la télécommande directement vers
la fenêtre de réception IR ou la tête du cable du récepteur IR.
Séléctionner la
source précédente
Séléctionner la
source suivante
Séléctionner la
source 1/2/3
Ce bouton est
indisponible
Ce bouton est
indisponible

18
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
Dépannage
Les problèmes courants sont souvent dus à des problèmes mineurs. En
cas de défaillance, consultez la liste de résolution des problèmes
simples, ci-après.
Procédure de dépannage courant en cinq étapes
1. Alimentation : vérifiez que tous les appareils sont sous tension
(source, commutateur, écrans d’affichage).
2. Voyants : vérifiez que les voyants du séparateur indiquent un
fonctionnement normal, conformément au manuel d’utilisation.
3. Appareils : vérifiez que l’image s’affiche normalement lorsque vous
connectez la source directement aux écrans d’affichage.
4. Câble : branchez et débranchez le câble HDMI ou remplacez-le par
un autre câble HDMI. Pour les résolutions 4K à 60 Hz, le câble
HDMI doit mesurer moins de 3 m et un câble HDMI standard est
requis.
5. Compatibilité : testez une autre source et d’autres écrans
d’affichage pour identifier un éventuel problème de compatibilité.
Questions fréquentes
1. Que faire en cas d’interruption ou flash vidéo pendant l’installation?
Vérifiez que tous les voyants sont allumés et fixes. Si ce n’est
pas le cas, vérifiez que l’adaptateur d’alimentation et les
câbles HDMI sont bien branchés.
Vérifiez que l’écran d’affichage fonctionne correctement et que
les appareils sources émettent des signaux de sortie normaux.
2. Que faire si le signal IR est faible ou inexistant ?
Assurez-vous que le câble IR est correctement installé,
conformément au schéma ci-dessus.
Tenez compte des limites de l’angle de commande et de la

19
For more information please call 1-833-574-9124 or email AVA[email protected] ··· To learn more about AVARRO products visit avarro.adiglobaldistribution.us
distance ci-dessous. Le signal de commande est plus fort
lorsque le contrôleur est dirigé directement vers la tête du
récepteur IR.
Utilisation de la fenêtre IR IN (ENTRÉE IR) sur le panneau du
commutateur :
Angle autorisé 0° 30° (horizontal) 15° (vertical)
Distance 9 m (max.) 5 m (max.) 4 m (max.)
Utilisation du câble du récepteur du module d’extension IR :
Angle autorisé 0° 30° (horizontal) 15° (vertical)
Distance 8 m (max) 4,5 m (max) 3 m (max)